A Finite Element Investigation on the Effect of Cross-sectional Warping on Flexural Response of Laminated Composites and Sandwiches using Higher-order Shear Deformation Theory

Abstract

An investigation on the effect of cross-sectional warping on the flexural response of laminates and sandwiches has been presented in this work. A simple C⁰finite element formulation of a higher-order shear deformation theory for thick and thin laminated composite and sandwich plates have been put forward. The assumed displacement model accounts for nonlinear variation of in-plane displacements and constant transverse displacement through the plate thickness. Moreover, this theory does not require any fictitious shear correction factors generally associated with the first-order shear deformation theory. For thick laminated plates, the bending response is highly affected by the cross-sectional warping. The so-called Mindlin's theory cannot capture this warping phenomenon due to linear variation of in-plane displacements. Only higherorder theories with higher-order terms in the in-plane displacement expression are required to compute displacements and stresses in the correct way. It has been shown that the free shear condition at the top and bottom bounding planes can be imposed in a simple way. The accuracy and validity of the present approach has been established through the numerical evaluation of deformation and stresses and their comparison with the available analytical/3D elasticity solutions and other published finite element results. The results from the present investigation compare fairly well with that of the other methods and finally some important conclusions have been made regarding the basic assumptions of CLT and Mindlin-type theories. It has been established that higher-order shear deformation theories and the modeling of cross-sectional warping are necessary for analyzing thick layered plates, specially soft-core sandwich plates.

Keywords

higher-order theory sandwich plate shear deformation cross-sectional warping laminated composite

Get full access to this article

View all access options for this article.

References

Aston, J. E. and Whitney, J. M. (1970). Theory of Laminated Plates, In: Progress in Material Science Series, Vol. IV, Technomic Publication, Stanford .

Reissner, E. (1945). The Effect of Transverse Shear Deformation on the Bending of Elastic Plates , ASME Journal of Applied Mechanics, 12: A69–A77 .

Mindlin, R. D. (1951). Influence of Rotary Inertia and Shear Deformation on Flexural Motions of Isotropic Elastic Plates , ASME Journal of Applied Mechanics, 18: 31–38 .

Reissner, E. (1948). Small Bending and Stretching of Sandwich-type Shells, NACA Report TN1526 and NACA Report 899.

Srinivas, S. and Rao, A. K. (1970). Bending Vibration and Buckling of Simply Supported Thick Orthotropic Rectangular Plates and Laminates , Int. J. Solids Structures, 6: 1463–1481 .

Pagano, N. J. (1970). Exact Solutions for Rectangular Bidirectional Composites and Sandwich Plates , J. Composite Material, 4: 20–34 .

Pagano, N. J. and Hatfield, S. J. (1972). Elastic Behaviour of Multilayered Bidirectional Composites , AIAA J., 10: 931–933 .

Whitney, J. M. (1972). Stress Analysis of Thick Laminated Composite and Sandwich Plates , J. Composite Material, 6: 426–440 .

Lo, K. H. , Christensen, R. M. and Wu, E. M. (1977). A Higher Order Theory of Plate Deformation – Part 1. Homogeneous Plates , ASME Journal of Applied Mechanics, 44: 663–668 .

10.

Lo, K. H. , Christensen, R. M. and Wu, E. M. (1977). A Higher Order Theory of Plate Deformation – Part 2. Laminated Plates , ASME Journal of Applied Mechanics, 44: 669–676 .

11.

Murthy, M. V. V. (1981). An Improved Transverse Shear Deformation Theory for Laminated Anisotropic Plates, NASA Technical Paper-1903.

12.

Reddy, J. N. (1984). A simple Higher Order Theory for Laminated Composite Plates , ASME Journal of Applied Mechanics, 51: 745–752 .

13.

Monforton, G. R. and Schmit, L. A. (1969). Finite Element Analysis of Sandwich Plates and Cylindrical Shells with Laminated Faces , In; Proc. 2nd Conf. Matrix Meth. Struct. Mech., Wright-Patterson Air Force Base, Ohio, pp. 573–616 .

14.

Martin, H. C. (1967). Stiffness Matrix for a Triangular Element in Bending, Jet Propulsion Lab., Report No. 32–1158.

15.

Cook, R. D. (1972). Two Hybrid Elements for Analysis of Thick, Thin and Sandwich Plates , Int. J. Numer. Meth. Engng., 5: 277–288 .

16.

Khatua, T. P. and Cheung, Y. K. (1972). Triangular Element for Multilayer Sandwich Plates , ASCE J. Engng. Mech., 98: 1225–1238 .

17.

Khatua, T. P. and Cheung, Y. K. (1973). Bending and Vibration of Multilayer Sandwich Beams and Plates , Int. J. Numer. Meth. Engng., 6: 11–24 .

18.

Fazio, P. P. and Ha, K. H. (1974). Sandwich Plate Structure Analysis by Finite Element , ASCE J. Struct. Div., 100: 1243–1262 .

19.

Mawenya, A. S. and Davies, J. D. (1974). Finite Element Bending Analysis of Multilayer Plates , Int. J. Numer. Meth. Engng., 8: 215–225 .

20.

Hinton, E. , Razzaque, A. , Zienkiewicz, O. C. and Davies, J. D. (1975). A Simple Finite Element Solution for Plates of Homogeneous, Sandwich and Cellular Construction, In: Proc. Instn. Civ. Engrs., Part 2, Vol. 59, pp. 43–65.

21.

Reddy, J. N. and Chao, W. C. (1981). A Comparison of Closed-form and Finite Element Solutions of Thick Laminated Anisotropic Rectangular Plates , Nucl. Engng. Des., 64: 153–167 .

22.

Phan, N. D. and Reddy, J. N. (1985). Analysis of Laminated Composite Plates using a Higher-order Shear Deformation Theory , Int. J. Numer. Meth. Engng., 21: 2201–2219 .

23.

Ren, J. G. and Hinton, E. (1986). The Finite Element Analysis of Homogeneous and Laminated Composite Plates using a Simple Higher-order Theory , Commun. Appl. Numer. Meth., 2: 217–228 .

24.

Pandya, B. N. and Kant, T. (1988). Higher Order Shear Deformation Theories for Flexure of Sandwich Plates – Finite Element Evaluation , Int. J. Solids. Struct., 24: 1267–1286 .

25.

Pandya, B. N. and Kant, T. (1988). Flexure Analysis of Laminated Composites using Refined Higher-order C 0Plate Bending Elements , Comp. Meth. Appl. Mech. Engng., 66: 173–188 .

26.

Reddy, J. N. (1997). Mechanics of Laminated Composite Plates, CRC Press, New York .

27.

Ochoa, O. O. and Reddy, J. N. (1997). Finite Element Analysis of Composite Laminates, Kluwer Academic Publishers, Netherlands .

28.

Aagaah, R. M. , Mahinfalah, M. and Jazar, G. N. (2003). Linear Static Analysis and Finite Element Modeling for Laminated Composite Plates using Third Order Shear Deformation Theory , Composite Structures, 62: 27–39 .