Sage Journals: Discover world-class research

Abstract

The shrinkage of vinyl ester particulate composites has been reduced by curing the resins under microwave conditions. The reduction in the shrinkage of the resins by microwaves will make the manufacture of large vinyl ester composite items possible. The impact strength of the vinyl ester composite components cured under microwave was reduced only by 1% when tested by drop weight impact tests. The aim of this study is to investigate the difference in fracture toughness between microwave-cured vinyl ester particulate composites and those cured under ambient conditions. Short bar method of fracture toughness measurement was used to perform the tests. The results show that the difference in the fracture toughness is minimal between the ambient condition-cured and the microwave-cured samples, provided the power level and duration of microwave irradiation are properly and optimally selected.

Keywords

fracture toughness microwave irradiation vinyl ester resins

Get full access to this article

View all access options for this article.

References

Clarke, J. L. (ed.) (1996). Structural Design of Polymer Composites, pp. 59-62, 343-345, 357, E & FN Spon, UK .

Matthews, F. L. and Rawlings, R. D. (1994). Composite Materials: Engineering and Science, 1st edn, pp. 171-173, Chapman and Hall, UK .

Osswald, T. A. and Menges, G. (1995). Materials Science of Polymers for Engineers, pp. 103-105, 229-231, Hanser Publishers, New York .

Ku, H. S. , Van Erp, G. , Ball, J. A. R. and Ayers, S. (2002a). Shrinkage Reduction of Thermoset Fibre Composites during Hardening using Microwaves Irradiation for Curing , In: Proceedings, Second World Engineering Congress, 22-25 July, Kuching, Malaysia, pp. 177-182 .

Ku, H. S. (2002b). Risks involved in Curing Vinyl Ester Resins using Microwaves Irradiation , Journal of Material Synthesis and Processing, 10(2): 97-106 .

Ku, S. H. (2003a). Curing Vinyl Ester Particle Reinforced Composites using Microwaves , Journal of Composite Materials, 37(22): 2027-2042 .

Ku, S. H. and Siores, E. (2003b). Shrinkage Reduction of Thermoset Matrix Particle Reinforced Composites during Hardening using Microwaves Irradiation, Transactions, Hong Kong Institution of Engineers (accepted for publication).

Askeland, D. R. (1998). The Science and Engineering of Materials, 3rd edn, pp. 163-164, Stanley Thornes, USA .

Baker, L. M. (1980). Development of the Short Road Method of Fracture Toughness Measurement , In: Proceedings, Conference on Wear and Fracture Prevention, 21-22 May 1980, ASM, Metals Park, Ohio, pp. 163-180 .

10.

Baker, L. M. (1981). Short Rod and Short Bar Fracture Toughness Specimen Geometries and Test Methods for Metallic Materials , In: Proceedings, Fracture Mechanics: Thirteenth Conference, ASMT STP 743, pp. 456-475 .

11.

Callister, W. D. (2003). Materials Science and Engineering: An Introduction, 6th edn, pp. 201-203, John Wiley and Sons, Inc., USA .

12.

Baddeley, D. T. and Ballard, J. (1991). Evaluate the Short Rod/Bar Fracture Mechanics Test, BEng Thesis of Jennine Ballard, School of Mechanical and Manufacturing Engineering, Queensland University of Technology, Australia.

13.

Barker, L. M. (1979). Fracture Mechanics Applied to Brittle Materials, ASTM, STP 678, pp. 73-82, American Society for Testing and Materials .

14.

Astrom, B. T. (1997). Manufacturing of Polymer Composites, pp. 74-83, 432-434, Chapman and Hall .

15.

National Research Council (NRC) (1994). Microwave Processing of Materials, pp. 1-7, 11-12, 100, 105, National Materials Advisory Board, Commission on Engineering and Technical Systems, National Academy Press, USA .

16.

Bows, J. R. (1999). Variable Frequency Microwave Heating of Food , Journal of Microwave Power and Electromagnetic Energy, USA, 34(4): 227-238 .

17.

Sheppard, L. M. (1988). Manufacturing Ceramics with Microwaves: The Potential for Economic Production , Ceramic Bulletin, UK, 67(10): 1556-1561 .

18.

Ku, H. S. , Siores, E. , Ball, J. A. R. and Horsfiled, B. (2001). Permittivity Measurement of Thermoplastic Composites at Elevated Temperature , Journal of Microwave Power and Electromagnetic Energy, USA, 36(2): 101-111 .

19.

Peters, S. T. (ed.) (1998). Handbook of Composites, pp. 40-41, Chapman and Hall, UK .

20.

Ku, H. S. , Siores, E. , Ball, J. A. R. and Horsfield, B. (1999a). Microwave Processing and Permittivity Measurement of Thermoplastic Composites at Elevated Temperatures , Journal of Materials Processing Technology, USA, 89-90: 419-424 .

21.

Ku, H. S. , Siores, E. and Ball, J. A. R. (1999b). Microwave Facilities for Welding Thermoplastic Composites, and Preliminary Results , Journal of Microwave Power and Electromagnetic Energy, USA, 34(4): 195-205 .

22.

Munz, D. (1981). Determination of Fracture Toughness of High Strength Aluminum Alloys with Cheron Notched Short Rod and Short Bar Specimens , Engineering Fracture Mechanics, 15(1-2): 231-236 .

23.

Denes, J. and Keedwell, A. D. (1974). Latin Squares and their Applications, pp. 1-41, English University Press Ltd, UK .

24.

University of Denver, Latin Squares, www.du.edu/∼jcalvert/econ/latsqar.htm, as at 18/03/03, pp. 1-3.

25.

Murdoch, J. and Barnes, J. A. (1975). Statistical Tables for Science, Engineering and Management, p.9, Macmillan, UK .

26.

Metaxas, A. C. and Meredith, R. J. (1983). Industrial Microwave Heating, pp. 5-6, 28-31, 43, 211, 217, 278, 284-285, Peter Peregrinus Ltd.

Fracture Toughness of Vinyl Ester Composites Cured by Microwave Irradiation: Preliminary Results

Abstract

Keywords

Get full access to this article

References