Sage Journals: Discover world-class research

Abstract

In this paper, a one-parameter plasticity model is used for characterizing the plastic behavior of AS4/PEEK thermoplastic composites. Using the finite element program generator (FEPG), the three-dimensional one-parameter plasticity model which is not presented in the commercial codes is introduced into this system, and the relative finite element programs are developed. The interlaminar stresses of the AS4/PEEK thermoplastic laminate [0/90]_s are computed and analyzed. The interlaminar stresses are presented in three ways: through the thickness, around the hole, and along the symmetric axes. The delamination locations are predicted.

Keywords

thermoplastic composites notch elastic-plasticity AS4/PEEK finite element method delamination interlaminar stresses

Get full access to this article

View all access options for this article.

References

Awerbuch, J. and Madhukar, M. S. (1985). Notched Strength of Composites Laminates: Predictions and Experiments - A Review , J. Reinf. Plast. Comp., 4: 3-159 .

Simonds, R. A. and Stinchcomb, W. W. (1989). Response of Notched AS4/PEEK Laminates to Tension/Compression Loading, In: Advances in Thermoplastic Matrix Composite Materials, ASTM STP 1044, pp. 133-145, American Society for Testing and Materials, Philadelphia, PA .

Carlile, D. R. and Leach, D. C. (1983). Damage and Notch Sensitivity of Graphite/PEEK Composites , In: Proc. 15th SAMPLE National Tech. Conf., Cincinnati, OH.

Tan, S.C. (1987). Tensile and Compressive Notched Strength of PEEK Matrix Laminates , J. Reinf. Plast. Comp., 6: 253-266 .

Carlson, L. A. , Aronsson, C. G. and Backlund, J. (1989). Notch Sensitility of Thermoset and Thermoplastic Laminates Loaded in Tension , J. Mater. Sci., 24: 1670-1682 .

Cottenot, C. , Vautey, P. , Marais, C. and Sigety, P. (1989). Comportement et Endommagement Compares des Composites Carbon a Matrices Thermodurcissable et Thermoplastique, ONERA , Annales des Composites, 1/2: 145-155 .

Vautey, P. and Favre, J. P. (1990). Fibre/Matrix Load Transfer in Thermoset and Thermoplastic Composites - Single Fibre Models and Hole Sensitility of Laminates , Comp. Sci. Technol., 38: 271-288 .

Lagace, P. A. , Bhat, N. V. and Gundogdu, A. (1993). Response of Notched Graphite/Epoxy and Graphite/PEEK Systems, In: Composite Materials: Fatigue and Fracture, ASTM STP 1156, Vol. 4, pp. 55-71, American Society for Testing and Materials, Philadelphia, PA .

Meili, S. and Priolo, P. (1996). Elastoplastic Behaviour of Composite Laminates, Experimental Techniques and Design in Composite Materials, 3, Cagliari , October.

10.

Sun, C. T. and Chen, G. (1992). Elastic-plastic Finite Element Analysis of Thermoplastic Composite Plates and Shells , AIAA Journal, 30(2): 513-518 .

11.

Chen, J. L. and Sun, C. T. (1993). A Plastic Potential Function Suitable for Anisotropic Fiber Composites , J. Compos. Mater., 27(14): 1379-1390 .

12.

Weeks, C. A. and Sun, C. T. (1998). Modeling Non-linear Rate-dependent Behaviour in Fiber-reinforced Composites , Composite Science and Technology, 58: 603-611 .

The Three-dimensional Elastic-plastic Analysis of Interlaminar Stresses in Notched Thermoplastic Composites

Abstract

Keywords

Get full access to this article

References