Moisture Absorption Behavior of Carbon Fiber-Reinforced Monomer Casting Nylon Composites

Abstract

A series of tests were conducted to study the moisture absorption behaviors of carbon fiber-reinforced monomer casting nylon (CF/MC) composites with fiber contents of 10 and 15 vol.%, and their effects on mechanical properties. The results show that the moisture absorption behavior of the CF/MC composites obeys a Fickian relationship. The maximum moisture uptake has been found to decrease with the increase of carbon fiber volume fraction. The moisture absorption rate and the time to reach the saturation fall as the immersion medium temperature increases. Furthermore, a great increase in moisture content and absorption rate is observed as the pH values of the medium decrease. It is observed that moisture intake has a deleterious effect on the mechanical properties (bending strength and hardness) of the CF/MC composites. Scanning electron microscopy (SEM) has been used to examine the shear and impact surfaces of the composites, and the findings of SEM observations are consistent with those of the moisture absorption experiments.

Keywords

CF/MC composites moisture absorption temperature medium mechanical properties

Get full access to this article

View all access options for this article.

References

1. Bostman, O. and PihlajamaKi, H. (2000). Clinical Biocompatibility of Biodegradable Orthopaedic Implants for Internal Fixation: a Review , Biomaterials, 21: 2615-2621 .

2. Paavolainen, P. , Karaharju, E. , Slatis, P. , Ahonen, J. and Holmstorm, T. (1987). Effect of Rigid Plate Fixation on Structure and Mineral Content of Cortical Bone , Clin. Orthop. Rel. Res., 136: 287-293 .

3. Simon, B.R. , Woo, S.L.Y. , McCarthy, M. , Lee, S. and Akeson, W.H. (1978). Parametric Study of Bone Remodeling Beneath Internal Fixation Plates of Varying Stiffness , J. Bioeng., 2: 543-556 .

4. Zheng, L.Y. , Wang, Y.L. and Wan, Y.Z. (2002). Preparation and Properties of In Situ Polymerized Fiber-Reinforced Nylon Composites , J. Mater. Sci. Lett., 21: 987-989 .

5. Fukumoto, S. (1988). Chapter Two: Nylon 6, Polyamides Resin Manual, p. 70, Japanese Industry Press c3085, Japan .

6. Gellert, E.P. and Turley, D.M. (1999). Seawater Immersion Ageing of Glass-fibre Reinforced Polymer Laminates for Marine Applications , Composites, 30A: 1259-1265 .

7. Selzer, R. and Friedrich, K. (1997). Mechanical Properties and Failure Behaviour of Carbon Fibre-reinforced Polymer Composites Under the Influence of Moisture , Composites, 28A: 595-604 .

8. Wan, Y.Z. , Wang, Y.L. , Luo, H.L. , Dong, X.H. and Cheng, G.X. (2002). Moisture Absorption Behavior of C3D/EP Composite and Effect of External Stress , Mater. Sci. Eng., 326A: 324-329 .

9. Chol, P.J.C. and Ding, D. (2000). Characterization of Moisture Absorption and its Influence on Composite Structures , J. Thermoplastic Compos. Mater., 13: 207-225 .

10.

10. Huang, P.T. , Lee, J.L. , Chiu, S.C. , Kwei, T.K. and Pearce, E.M. (1999). Modification of Nylon 6 by Phenol-Containing Polymers , J. Appl. Polym. Sci., 73: 295-300 .

11.

11. Soles, C.L. , Chang, F.T. and Gidley, D.W. (2000). Contribution of the Nanovoid Structure to the Kinetics of Moisture Transport in Epoxy Resins , J. Polym. Sci., Part B: Polymer Physics, 38: 776-791 .

12.

12. Suri, C. , Hamada, H. and Fujihara, K. (2001). Influence of Aging and Surface Treatment on the Mode II Fracture Behaviour in a Glass/Vinylester Composite , Composite Interfaces, 8: 135-149 .

13.

13. Richard, L.C. , Michael, D.C. and Ronald G.K. (1999). Nylon 66/Poly(Vinyl Pyrrolidone) Reinforced Composites: 2 Bulk Mechanical Properties and Moisture Effects , Composites, 30A: 37-48 .

14.

14. Merdasa, I. , Tcharkhtchia, A. , Thominettea, F. , Verdua, J. , Deanb, K. and Cook, W. (2002). Water Absorption by Uncrosslinked Polymers, Networks and IPNs Having Medium to High Polarity , Polymer, 43: 4619-4625 .

15.

15. Mohd Ishak, Z.A. and Berry, J.P. (1994). Hygrothermal Aging Studies of Short Carbon Fiber Reinforced Nylon6.6 , J. Appl. Polym. Sci., 51: 2145-2155 .

16.

16. Adamson, M.J. (1980). Thermal Expansion and Swelling of Cured Epoxy Resin Used in Graphite/Epoxy Composite Materials , J. Mater. Sci., 15: 1736-1745 .

17.

17. Bao, L.R. and Yee, A.F. (2002). Effect of Temperature on Moisture Absorption in a Bismaleimide Resin and its Carbon Fiber Composites , Polymer, 43: 3987-3997 .

18.

18. Doxsee, L.E. , Janssens, W. , Verpoest, I. and De Meester, P. (1991). Strength of Aramid-Epoxy Composites During Moisture Absorption , J. Reinforced Plastics Compos., 10: 645-655 .

19.

19. Komai, K. , Minoshima, K. and Shiroshita, S. (1991). Hygrothermal Degradation and Fracture Process of Advanced Fiber-Reinforced Plastics , Mater. Sci. Eng., 143A: 155-166 .

20.

20. Liou, W.J. (1998). Effects of Moisture Content on the Creep Behavior of Nylon6 Thermoplastic Composites , J. Reinforced Plastics Compos., 17: 39-50 .

21.

21. Ishak, Z.A. , Perry, J.P. (1994). Effect of Moisture Absorption on the Dynamic-Mechanical Properties of Short Carbon-Fiber-Reinforced Nylon 6,6 , Polym. Compos., 15: 223-230 .

22.

22. Cervenka, A.J. , Bannister, D.J. and Young, R.J. (1998). Moisture Absorption and Interfacial Failure in Aramid/Epoxy Composites , Composites, 29A: 1137-1144 .