Optimized Mechanical Performance of Welded and Molded Butt Joints: Part II

Abstract

Recent developments were oriented on the analysis of the mechanical performance at local (knit lines and welds) and bulk (molded part) areas, with the influence of molding and welding conditions. It has been found that for non-reinforced and reinforced nylon, the mechanical performance in the knit planes and welded areas are approximately equal to the mechanical performance of a base resin (matrix).

The observations on similarities and differences in the formation of knit and weld lines are presented in Part I of this paper. Analysis of mechanical performance at weld at knit lines of various nylons is discussed in Part II.

Get full access to this article

View all access options for this article.

References

1. Rosato, Donald and Rosato, Dominick (1995). Injection Molding Handbook. 2nd Edn. New York: Charman & Hall . 1145pp.

2. Engineering Plastics. Engineered Materials Handbook, Vol. 2. Metals Park OH: ASM International (1988). 882pp.

3. Trantina, G. and Nimmer, R. (1994). Structural Analysis of Thermoplastic Components. New York: McGraw-Hill, Inc. 366pp.

4. Maxwell, J. (1994). Plastics in the Automotive Industry. Cambridge, England: Woodhead Publishing Limited . 189pp.

5. Kohan, M. (1997). Nylon Plastic Handbook. New York: Hanser Publications, Inc. 598pp.

6. Carlson, E. and Nelson, K. (December, 1996). SAE, Automotive Engineering. pp. 84-89.

7. Kagan, V.A. (1999). ANTEC'99 . Proceedings of the 57th Annual Conference and Exhibits. pp. 1349-1356 .

8. Kagan, V.A. (2000). ANTEC'2000 . Proceedings of the 58th Annual Conference and Exhibits. pp. 1288-1301 .

9. Chang, T.C. and Faison, E. (1999). ANTEC'99 . Proceedings of the 57th Annual Conference and Exhibits. Vol. 1. pp. 486-490 .

10.

10. Malloy, R. (1994). Plastic Part Design for Injection Molding. Munich, Vienna, New York: Hanser Publishers . 453pp.

11.

11. Cloud, P., McDowell, F. and Gekaris, S. (August, 1976). Plastic Technology.

12.

12. Plastics Handbook. (1998). Vol. 4. Polyamide. Munich: Hanser Publishing . 905pp.

13.

13. MacDermott, C. and Shenoy, A. (1994). Selecting Thermoplastics for Engineering Applications. New York: Marcel Dekker, Inc. 305pp.

14.

14. Turning, L.S., Chiang, H.H. and Stevenson, J.F. (October, 1995). Plastic Engineering, SPE . pp. 33-36.

Optimized Mechanical Performance of Welded and Molded Butt Joints: Part II - Weld and Knit Lines Integrity

Abstract

Get full access to this article

References