High Strain Compression Response of Affordable Woven Carbon/Epoxy Composites

Abstract

This paper discusses the experimental study on the response of affordable plain and satin weave carbon/epoxy composite laminates subjected to high strain rate compression loading using a modified Compression Split Hopkinson’s Pressure Bar (SHPB). 37 layer laminates were manufactured using aerospace grade woven fabrics with SC-15 epoxy resin system utilizing Vacuum Assisted Resin Infusion Molding (VARIM) approach. Samples were subjected to high strain rate compression loading at five different strain rates ranging from 17/s to 817/s in the in-plane as well as through-the-thickness directions using a modified SHPB that facilitates controlled single pulse loading of the sample. High strain rate response was compared with that of static compression. Optical microscopy was used to characterize the failure mechanisms. Results of the study indicate considerable increase in dynamic compression peak stress as compared to static loading, whereas the strain at peak stress was lower by 35-65%. Samples loaded through-the-thickness exhibit higher peak stresses as compared to those loaded in the in-plane direction.

Keywords

woven composites high strain rate split Hopkinson’s pressure bar resin infusion molding

Get full access to this article

View all access options for this article.

References

1. Sierakowski, R.L. (1997). Applied Mechanics Reviews, 50(11): Part 1. 741-761.

2. El-Habak, A.M.A. (1993). Journal of Composite Technology and Research. JCTRER, 15(4): 311-317.

3. Monteal, D.M. , Williams, C.J. (1992). A method for evaluating the high strain rate compressive properties of composite materials. In: Grimes, G.C. (ed.), Composite Materials: Testing and Design (Tenth Volume) ASTM STP 1120. Philadelphia: American Society for Testing and Materials. pp. 54-65.

4. Harding, J. (1993). Composites, 2: 323-332.

5. Powers, B.M. , Vinson, J.R. , Wardle, M. and Scott, B. (1995). High strain rate effects on polymer, metal, and ceramic matrix composites and other advanced materials. In: Proceedings of the ASME Aerospace Division Board AD-48. pp. 179-189.

6. Powers, B.M. and Vinson, J.R. (1996). In: Allen, H.G. (ed.), Sandwich Construction, 3rd Edn. England: Engineering Materials Advisory Services, Ltd. pp. 769-778.

7. Woldenbet, E. and Vinson, J.R. (1997). In: Proc. of 38th AIAA/ASME/ASCE/AHS/ASC Struc. Struc. Dyn. and Matl. Conf. 2: 927-934.

8. Preissner, E.C. , Woldesenbet, E. and Vinson, J.R. (1997). In: Proc. of 38th AIAA/ASME/ASCE/AHS/ASC Struc. Struc. Dyn. and Matl. Conf. 2: 935-944.

9. Vinson, J.R. and Woldesenbet, E. (1998). Proceedings of American Society for Composites 13th Technical Conference. Baltimore. pp. 1700-1706.

10.

10. Dee, A.T. , Vinson, J.R. and Zedelmayer, E. (1998). Proceedings of American Society for Composites 13th Technical Conference. Baltimore. pp. 1707-1731.

11.

11. Waas, A.M. , Takeda, N. , Yuan, J. and Lee, S.H. (1997). Proceedings 12th Annual Technical American Society for Composites Conference. Dearborn. pp. 552-561.

12.

12. Hsiao, H.M. , Daniel, I.M. and Cordes, R.D. (1999). Journal of Composite Materials, 33: 1620-1642.

13.

13. Hosur, M.V. , Vaidya, U.K , Abraham, A. , Jadhav, N. and Jeelani, S. (1999). ASME Journal of Engineering Materials and Technology, 4: 468-475.

14.

14. Vaidya, U.K. , Jadhav, N.C. , Hosur, M.V. , Gillespie, Jr. J.W. and Fink, B.K. (1999). In: Proceedings of American Society for Composites 14th Technical Conference, Fairborn. pp. 141-151.

15.

15. Weeks, C.A. and Sun, C.T. (1998). Composites Science and Technology, 58: 603-611.

16.

16. Ninan, L. and Sun, C.T. (1998). In: Proceedings of American Society for Composites 13th Technical Conference. Baltimore. pp. 1732-1745.

17.

17. Nemat-Nasser, S. , Isaacs, J.B. and Starrett, J. (1991). In: Proc. R. Soc. London. A, pp. 371-391.

18.

18. Schwartz, M.M. (1996). Composite Materials - Processing, Fabrication and Applications, Vol. II. New Jersey, USA: Prentice-Hall Publishers.

19.

19. Hosur, M.V. , Alexander. J , Vaidya, U.K. and Jeelani. S. (2001). Composite Structures, 52: 405-417.

20.

20. Li. Z. , Lambros. J. (2000). Composites-Part A, 31: 537-547.

21.

21. Palmese, G.R. , McCullogh, R.L. and Sottos. N.R. , (1995). J. Adhesion, 52: 101-113.