In this paper, the issues surrounding the repair of composite structures have been reviewed. This review has highlighted the need for the development of analytical techniques for the design of repair schemes. The finite element method is shown to be an appropriate candidate for such a task. Modelling approaches for adhesively bonded joints are well documented in the literature. Although bonded joints and repair joints share similar features, designing repairs and bonded joints are two different tasks. The open literature on modelling approaches specifically for repair joints is not abundant. Furthermore, there is no evidence of any studies undertaken with the specific aim of looking at the fundamental aspects of applying the finite element method to the analysis of bonded repairs to composite structures.
This paper highlights the philosophy behind these modelling approaches that have been used or suggested in the past. These approaches have been compared in order to gain a better understanding of the current state of affairs and how they relate to each other.
1. Bashford, P D; “The potential of composite materials,”Composite Materials in Aircraft Structures, ed. D H Middleton, Longman Group UK Ltd, 1990, pp. 9-16.
2.
2. Baker, A A; Jones, R; Callinan, R J; “Damage tolerance of graphite/epoxy composites,”Composite Structures, Vol. 4, 1985, pp. 15-44.
3.
3. Heslehurst, R B; “Analysis and modelling of damage and repair of composite materials in aerospace,”Numerical Analysis and Modelling of Composite Materials, ed. J W Bull, Chapman and Hall, 1996, pp. 28-59.
4.
4. Teagle, P R; “Non destructive evaluation of composite aerospace components,”Composite Materials in Aircraft Structures, ed. D H Middleton, Longman Group UK Limited, 1990, pp. 190-206.
5.
5. Wegman, R F; Tullos, T R; Handbook of Adhesive Bonded Structural Repair, Noyes Publications, USA, 1992, pp. 199-215.
6.
6. Robson, J E; “The repair of composite materials,” PhD Thesis, 1993, Imperial College.
7.
7. Myhre, S H; Labor, J D; “Repair of advanced composite structures,”Journal of Aircraft, Vol. 18, No. 7, 1981, pp. 546-552.
8.
8. Cook, T N; Renieri, M; Breault, G B; Cox, R; “Advanced composite structures R&M design and repair guide,” USAACOM Report No. TR-85-D-12, USA, 1986, pp. 5.1-5.5.
9.
9. Hart-Smith, L J; “The design of repairable advanced composite structures,” SAE Paper 851830, Aerospace Technology Conference and Exposition, Long Beach, California, USA, 14-17 Oct 1985, 15 pp.
10.
10. Myhre, S H; Beck, C E; “Repair concepts for advanced composite structures,”Journal of Aircraft, Vol. 16, No. 10, 1979, pp. 720-728.
11.
11. Baker, A A; “Repair techniques for composite structures,”Composite Materials in Aircraft Structures, ed. D H Middleton, Longman Group UK Ltd, 1990, pp. 207-227.
12.
12. Donnellan, T M; Rosenweig, E L; Trabocco, R E; Williams, J G; “Repair of composites,”Composite Structure Repair, AGARD-R-716-Addendum, AGARD, NATO, Neuilly-sur-seine France, 1984, pp. 1.1-1.10.
13.
13. Border, J; “The heat’s on for quick composite repair,”Machine Design, 7 Mar 1991, pp. 71-74.
14.
14. Varadan, V K; Varadan, V V; “Microwave joining and repair of composite materials,”Polymer Engineering and Science, Vol. 31, Apr 1991, pp. 470-486.
15.
15. Myhre, S H; “Advanced composite repair—recent developments and some problems,”Composite Repair SAMPE Monograph I, ed. H. Brown, SAMPE, Covina, CA, USA, pp. 14-25.
16.
16. Myhre, SHet al.; “Advanced composite repair guide,” AFWAL-TR-83-3092, Air Force Wright Aeronautical Lab, USA, 1982.
17.
17. Knauss, J F; Stone, R H; “Demonstration of repairability and repair quality on graphite/epoxy structural subelements,”Composite Repair SAMPE Monograph I, ed. H. Brown, SAMPE, Covina, CA, USA, pp. 40-51.
18.
18. Stone, R H; “Development of repair procedures for graphite/epoxy structures on commercial transports,”Composite Repair SAMPE Monograph I, ed. H. Brown, SAMPE, Covina, CA, USA, pp. 26-39.
19.
19. Hall, S R; Raizenne, M D; Simpson, D L; “A proposed composite repair methodology for primary structures,”Composites, Vol. 20, No. 5, Sept 1989, pp. 479-483.
20.
20. Hart-Smith, L J; “Analysis and design of advanced composite bonded joints,” NASA contractor Report CR-2218, 1974.
21.
21. Hart-Smith, L J; “Adhesive bonded joints for fibrous composite structures,” Douglas Paper—presented at International Symposium, “Joining and repair of fibre reinforced plastics,”Imperial College, 1986.
22.
22. Hart-Smith, L J; “Adhesive bonded scarf and stepped lap joints,” NASA Contractor Report CR 112237, 1973.
23.
23. Hart-Smith, L J; “Further developments in the design and analysis of adhesive-bonded structural joints,”Joining of Composite Materials, ASTM STP 749, K T Kedward, Ed., American Society for Testing and Materials, 1981, pp. 3-31.
24.
24. Sandow, F; “A computer aided aircraft structural composite repair system,”Proceedings 32nd International SAMPE Symposium, 1987, pp. 551-557.
25.
25. Loss, K R; Kedward, K T; “Modelling and analysis of peel and shear stresses in adhesively bonded joints,” Paper 84-0913, AIAA, 1984.
26.
26. Siener, M P; “Stress field sensitivity of a composite patch repair as a result of varying patch repair thickness,” ASTM STP 1120, Composite Materials: Testing and Design, Volume 10, 1992, pp. 444-464.
27.
27. Chicken, S H; “Repair of military aircraft composites,”Proceedings of the RAeS Damage, Assessment and Repair Conference, London, UK, 1996, pp. 3.1-3.11.
28.
28. Davis, M J; “The development of an engineering standard for composite repair,” AGARD-CP-550, AGARD, NATO, 1995, pp. 24.1-24.11.
29.
29. Hall, S R; Raizenne, M D; Simpson, D L; “A proposed composite repair methodology for primary structures,”Composites, Vol. 20, No. 5, Sept 1989, pp. 479-483.
30.
30. Jones, R; Callinan, R J; Aggarwal, K C; “Analysis of bonded repairs to damaged fibre composite structures,”Engineering Fracture Mechanics, Vol. 17, No. 1, 1983, pp. 37-46.
31.
31. Kinloch, A J; Shaw, S J; Journal of Adhesion, Vol. 12, 1981, pp. 59-77.
32.
32. Soutis, C; Hu, F Z; “Design and performance of bonded patch repairs of composite structures,” presented at the IMechE Conference on Airworthiness Aspects of New Technologies, 10 November 1996, Bristol, UK, 17 pp.
33.
33. Soutis, C; Hu, F Z; “Repair design of composites and efficiency of scarf patch repairs,”Proceedings 11th International Conference on Composite Materials, Vol. VI, July 1997, Woodhead Publishers, pp. 395-404.
34.
34. Baker, A A; Chester R J; Hugo, G R, Radtke, T C; “Scarf repairs to graphite/epoxy components,” AGARD-CP-550, AGARD, NATO, 1995, pp. 19.1-19.12.
35.
35. Bair, D L; Hudson, P O; Ghanimati, G R; “Analysis and repair of damaged composite laminates,”Proceedings 36th International SAMPE symposium, SAMPE, Covina, CA USA, Vol. 36, Book 2, 1991, pp. 2264-2278.
36.
36. Pickett, A K; Holloway, L; “The analysis of elastic-plastic adhesive stress in bonded lap joints in FRP structures,”Composite Structures, Vol. 4, 1985, pp. 135-160.
37.
37. Adams, R. D.1987“Theoretical stress analysis of adhesively bonded joints,” Chapter 5, Joining of Fibre-reinforced Plastics, ed. F L Matthews, Elsevier, 1987, pp. 185-226.
