Accelerated environmental conditioning increases creep rate of FRP bars and results in 2%-3% moisture absorption. Presence of salt in the solution does not affect creep rate of FRP-RC beams or moisture absorption of FRP bars. Effect on strength and stiffness of FRP is about 3% for saline solutions and none for moisture. Environmental conditioning lowers post-cracking stiffness of the beams due to stiffness degradation of FRP and loss of bond between FRP and concrete. Fiber optic sensors are less sensitive than foil gages to temperature effects, but must be handled properly during construction and secured carefully against harsh environments.
Bazant, Z.P. (1972). “Prediction of concrete creep effects using age-adjusted effective modulus method.”ACI Journal, 69(4), 212-217.
2.
Bradford, M.A. , and Gilbert, R.I. (1990). “Time-dependent analysis and design of composite columns.”Journal of Structural Engineering, 116(12), 3338-3357.
3.
Dore, G. , Konrad, J.M., and Roy, M. (1997). “Role of deicing salt in pavement deterioration by frost action.”Transportation Research Record, TRR-1596, 70-75.
4.
Fuhr, P.L. , Huston, D.R., Ambrose, T.P., and Snyder, D.M. (1993). “Stress monitoring of concrete using embedded optical fiber sensors.”Journal of Structural Engineering, 119(7), 2263-2269.
5.
Hundley, A. , and Dolan, C. (1996). “Non-accelerated creep-rupture of fiber-reinforced-plastics in a concrete environment.”Proceedings of Materials Engineering Congress, ASCE, Washington, D.C., 519-526.
6.
Huston, D. , Fuhr, P., Kajenski, P., and Snyder, D. (1992). “Concrete beam testing with optical fiber sensors.”Structures Congress, San Antonio, TX, ASCE, Ansari (Ed.), 60-66.
7.
Kalamkarov, A.L. , Fitzgerald, S.B., MacDonald, D.O., and Georgiades, A.V. (2000). “Mechanical performance of pultruded composite rods with embedded fiber optic sensors.”Composites Science and Technology, 60(8), 1161-1169.
8.
Maaskant, R. , Alavie, T., Measures, R.M., Tadros, G., Rizkalla, S.H., and Guha-Thakurta, A. (1997). “Fiber-optic bragg grating sensors for bridge monitoring.”Cement and Concrete Composites, 19, 21-33.
9.
Saadatmanesh, H. , and Tannous, F.E. (1998). “Durability of fiber reinforced plastic (FRP) rebars and tendons in aggressive environments.”Proceedings of the International Seminar on Repair and Rehabilitation of Reinforced Concrete Structures, Maracaibo, Venezuela, 120-133.
10.
Sen, R. , Mariscal, D., and Shahawy, M. (1993). “Durability of fiberglass pretensioned beams.”Structural Journal, ACI, 90(5), 525-533.
11.
Singhvi, A. (2000). “Creep and durability of FRP-RC beams under sustained loads and in harsh environments using fiber-optic instrumentation.” M.S. thesis, University of Cincinnati, Cincinnati, OH.
12.
Tannous, F.E. , and Saadatmanesh, H. (1999). “Durability of AR glass fiber reinforced plastic bars.”Journal of Composites for Construction, 3(1), 12-19.
13.
Triantafillou, T.C. , and Plevris, N. (1992). “Time-dependent behavior of RC members strengthened with FRP laminates.”Journal of Structural Engineering, 120(3), 1016-1041.
14.
Wang, Z. , Joh, O., and Goto, Y. (1999). “Bond creep behavior of FRP rods and their bond strength after sustained loading.”Transactions of the Japan Concrete Institute, Japan Concrete Institute, Vol. 21, 221-226.
