Influence of Matrix Toughness on Damage Initiation and Growth in Carbon Fiber Fabric Composites

Abstract

Progression of fatigue damage in toughened carbon fiber fabric composites by using matrix material of high toughness has been examined with hole-notched specimens. The matrix is toughened by impregnating solid rubber particles a fraction of a micron in diameter. The damage progression in the materials is mainly investigated as two-dimensional information by using analyses of stress distribution data obtained through the thermoelastic stress analysis (TSA). In particular, a new TDA technique developed by improving ordinary TSA has been applied to ascertain smaller (mesoscopic) failure. With the TDA data, improved matrix resin toughness actually influences to inhibit damage development in early fatigue process in the laminates. In addition, the finite element analysis is discussed in terms of a stress distribution and a strain level of damage initiation in the laminated materials.

Get full access to this article

View all access options for this article.

References

1. Yee, A. F. 1987. "Modifying Matrix Materials for Tougher Composites," Toughened Composites, ASTM STP 937, Ed. Johnston, N. J. , pp. 383-396.

2. Evans, R. E. , and Masters, J. E. 1987. "A New Generation of Epoxy Composites for Primary Structural Applications: Materials and Mechanics," Toughened Composites, ASTM STP 937, Ed. Johnston, N. J. , pp. 413-436.

3. Russell, A. J. and Street, K. N. 1987. "The Effect of Matrix Toughness on Delamination: Static and Fatigue Fracture under Mode II Shear Loading ot Graphite Fiber Composites," Toughened Composites, ASTM STP 937, Ed. Johnston, N. J. , pp. 275-294.

4. Higashino, M. Takemura, K. and Fujii, T. 1995. "Strength and Damage Accumulation of Carbon Fabric Composites with a Cross-Linked NBR Modified Epoxy under Static and Cyclic Loadings," J Composite Structures, 32, pp. 357-366.

5. Rauch, B. J. and Rowlands, R. E. 1993. "Thermoplastic Stress Analysis," in Handbook on Experimental Mechanics, ed. A. S. Kobayashi , 2nd Ed., VCH Publishers, New York, pp. 581-599.

6. Kageyama, K. , Ueki, K. and Kikuchi, M. 1988. "Thermoplastic Technique Applied to Stress Analysis of Carbon Fiber Reinforced Composite Materials," Proc. 6th Int. Congr Exp. Mech., pp. 931-936.

7. Feng, Z. , Zhang, D. , Rowlands, R. E. and Sandor, B. I. 1992. "Thermoplastic Determination of Individual Stress Components in Loaded Composites," Experimental Mechanics, 32, pp. 89-95.

8. Lin, S. T. and Rowlands, R. E. 1995. "Thermoplastic Stress Analysis of Orthotropic Composites," Experimental Mechanics, 35, pp. 257-265.

9. Bakis, C. E. , Simonds, R. A. , Vick, L. W. and Stinchcomb, W. W. 1990. "Matrix Toughness, Long-Term Behavior, and Damage Tolerance of Notched Graphite Fiber-Reinforced Composite Materials," in Composite Materials: Testing and Design (9th vol.), Ed. S. P. Garbo , ASTM STP 1059, pp. 349-370.

10.

10. Uenoya, T. , Masuki, A. , and Fujii, T. 1995. "Approach to Damage in Woven Fabric Composite Laminates through a Hybrid Thermoelastic/Acoustic Emission Technique," Proc. of NDE Technique Symp. by Thermography, JSNDI, Tokyo, pp. 29-34 (in Japanese).

11.

11. Uenoya, T. and Fujii, T. 1997. "Characterization of Real Damage in Carbon Fabric Composite with Toughened Matrix Through Thermoelastic Techniques," in Deformation and Fracture on Composites, Proc. of DFC-4, Inst. of Materials, Manchester, pp. 439-448.

12.

12. Uenoya, T. and Fujii, T. 1998. "Improved Thermoelastic Analysis on Mesoscopic Damage State in Carbon Fabric Composite Laminates," Proc. 27th FRPSymp., Soc. Mat. Sci., Japan, Kyoto, pp. 243-246 (in Japanese).

13.

13. Potter, R. T. and Greaves, L. J. 1987. "The Application of Thermoelastic Stress Analysis Technique to Fibre Composite Laminates," Proc. SPIE Meeting, 817, San Diego. pp. 134-146.

14.

14. Uenoya, T. and Fujii, T. 1998. "Thermoelastic Characterization on Damage Progress in Toughened Resin Carbon Fiber Fabric Composite." Key Eng. Materials, 137, pp. 139-146.