A review of displacement and stress based refined theories for isotropic and anisotropic laminated plates is presented. Various equivalent single layer and layerwise theories for laminated plates are discussed together with their merits and demerits. Exact elasticity solutions for the plate problems are cited, wherever available. Various critical issues related to plate theories are presented, based on the literature reviewed.
1. Broutman, L. J., and Krock, R. H. (Eds.), 1967, Modern Composite Materials, Addison-Wesley Pub. Co., New York.
2.
2. Broutman, L. J., and Krock, R. H. (Eds.), 1974, Composite Materials, Vol. 1-7, Academic Press, New York.
3.
3. Ashton, J. E., and Halpin, H. C., and Pettit, P. H., 1969, Primer on Composite Materials: Analysis, Technomic Pub. Co., Lancaster.
4.
4. Calcote, L. R., 1969, Analysis of Laminated Composite Structures, Van Nostrand Reinhold Co., London, England.
5.
5. Ashton, J. E., and Whitney, J. M., 1970, Theory of Laminated Plates, Technomic Pub. Co., Lancaster.
6.
6. Jones, R. M., 1975, Mechanics of Composite Materials, Scripta Book Co., Washington, D.C.
7.
7. Christensen, R. M., 1979, Mechanics of Composite Materials, John Wiley and Sons, New York.
8.
8. Tsai, S. W., and Hahn, H. T., 1980, Introduction to Composite Materials, Technomic Pub. Co., Lancaster.
9.
9. Agarwal, B. D. and Broutman, L. J., 1980, Analysis and Performance of Fiber Composites, John Wiley and Sons, New York.
10.
10. Hull, D., 1981, An Introduction to Composite Materials, Cambridge University Press, Cambridge.
11.
11. Daniel, I. M., and Ishai, O., 1994, Engineering Mechanics of Composite Materials, Oxford University Press, New York.
12.
12. Bert, C. W., and Francis, P. H., 1974, “Composite Material Mechanics: Structural Mechanics,”AIAA Journal, Vol. 12, No.9, pp.1173-1186.
13.
13. Noor, A. K., 1992, “Mechanics of Anisotropic Plates and Shells_A New Look at an Old Subject,”Computer and Structures, Vol. 44, pp.499-514.
14.
14. Vinson, J. R., and Chou, T. W., 1975, Composite Materials and Their Use in Structures, Applied Science Pub. Ltd., London.
15.
15. Vinson, J. R., and Sierakowski, R. L., 1986, The Behaviour of Structures Composed of Composite Materials, Martinus Nijhoff Publishers, Dordrecht, The Netherlands.
16.
16. Whitney, J. M., 1987, Structural Analysis of Laminated Anisotropic Plates. Technomic Publishing Co. Inc., Lancaster, Pennsylvania, U.S.A., p. 342.
17.
17. Reddy, J. N., 1997, Mechanics of Laminated Composite Plates: Theory and Analysis, CRC Press, Boca Raton, Florida., p. 782.
18.
[Journal of Applied Mathematics and Mechanics, Vol. 32, No.4, pp. 704-718, 1968.]
19.
19. Kil’chevskiy, N. A., 1963, “Fundamentals of the Analytical Mechanics of Shells,” (English translation, 1965), NASA TT-F-292, pp. 1-360.
20.
20. Donnell, L. H., 1976, Beams, Plates and Shells, McGraw-Hill Book Co., New York, USA.
21.
21. Noor, A. K., and Burton, W. S., 1989, “Assessment of Shear Deformation Theories for Multilayered Composite Plates,”Applied Mechanics Reviews, Vol. 42, pp. 1-13.
22.
22. Kirchhoff, G. R., 1850, “Uber das Gleichgewicht und die Bewegung einer Elastischen Scheibe,”J. Reine Angew. Math. (Crelle), Vol. 40, pp. 51-88.
23.
23. Kirchhoff, G. R., 1850, “Uber die Schwingungen Einer Kriesformigen Elastischen Scheibe,”Poggendorffs Annalen, Vol. 81, pp. 258-264.
24.
[Journal of Applied Mathematics and Mechanics, Vol. 58, No.6, pp. 1101-1110, 1994.]
25.
25. Love, A. E. H., 1944, A Treatise on the Mathematical Theory of Elasticity, 4th ed., Dover Publ., New York, USA.
26.
26. Timoshenko, S. P. and Woinowsky-Krieger, S., 1959, Theory of Plates and Shells, McGraw-Hill Book Company, Inc., New York.
27.
27. Timoshenko, S. P. and Gere, J., 1961, Theory of Elastic Stability, McGraw-Hill Book Company, Inc., New York.
28.
28. Dym, C. L., and Shames, I. H., 1973, Solid Mechanics: A Variational Approach, McGraw-Hill Book Company, Inc., New York.
29.
29. Szilard, R., 1974, Theory and Analysis of Plates, Classical and Numerical Methods, Prentice-Hall Inc., Englewood Cliffs, New Jersey.
30.
30. Ugural, A. C., 1981, Stresses in Plates and Shells, McGraw-Hill Book Company, New York.
31.
[Soviet Applied Mechanics, Vol. 6, No.7, pp. 687-701, 1973.]
32.
[Mechanics of Solids, Vol. 27, No. 3, pp. 22-42, 1992.]
33.
33. Panc, V., 1975, Theories of Elastic Plates, Noordhoff International Publishing, Leyden, The Netherlands.
34.
34. Bolle, E., 1947, “Contribution au Probleme Lineaire de Flexion d’une Plaque Elastique,”Bulletin Technique de la Suisse Romande, Parts 1 and 2, Vol. 73, pp. 281-285 and 293-298.
35.
35. Hencky, H., 1947, “Uber die Berucksichtigung der Schubverzerrung in ebenen Platten,”Ingenieur-Archiv, Vol. 16, pp. 72-76.
36.
36. Uflyand, Y. S., 1948, “The Propogation of Waves in the Transverse Vibrations of Bars and Plates,”Prikladnaya Matematika I Mekhanika, Vol. 12, pp. 287-300.
37.
37. Mindlin, R. D., 1951, “Influence of Rotatory Inertia and Shear on Flexural Motions of Isotropic, Elastic Plates,”ASME Journal of Applied Mechanics, Vol. 18, pp. 31-38.
38.
38. Timoshenko, S. P., 1921, “On the Correction for Shear of the Differential Equation for Transverse Vibrations of Prismatic Bars,”Philosophical Magazine, Series 6, Vol. 41, pp. 744-746.
39.
39. Timoshenko, S. P., 1922, “On Transverse Vibrations of Bars of Uniform Cross Section,”Philosophical Magazine, Series 6, Vol. 43, pp. 125-131.
40.
40. Yang, P. C., Norris, C. H., and Stavsky, Y., 1966, “Elastic Wave Propogation in Heterogeneous Plates,”International Journal of Solids and Structures, Vol. 2, pp. 665-684.
41.
41. Whitney, J. M., and Pagano, N. J., 1970, “Shear Deformation in Heterogeneous Anisotropic Plates,”ASME Journal of Applied Mechanics, Vol. 37, pp. 1031-1036.
42.
42. Reissner, E., 1944, “On the Theory of Bending of Elastic Plates,”Journal of Mathematics and Physics, Vol. 23, pp. 184-191.
43.
43. Reissner, E., 1945, “The Effect of Transverse Shear Deformation on the Bending of Elastic Plates,”ASME Journal of Applied Mechanics, Vol. 12, pp. 69-77.
44.
44. Donnell, L. H., Drucker, D. C., and Goodier, J. N., 1946, Discussion of the paper by Reissner, E., 1945, “The Effect of Transvesre Shear Deformation on the Bending of Elastic Plates,”ASME Journal of Applied Mechanics, Vol. 13, No.1, pp. A249-A252.
45.
45. Green, A. E., 1949, “On Reissner’s Theory of Bending of Elastic Plates,”Quart. Appl. Math., Vol. 7, pp. 223
46.
46. Schafer, M., 1952, “Uber eine Verfeinerung der Klassischen Theorie Dunner Schwach Gebogener Platten,”ZAMM: Zeitschrift fur Angewandte Mathematik und Mechanik, Band 32, Heft 6, pp. 161-171.
47.
47. Frederick, D., 1956, “On some Problems in Bending of Thick Circular Plates on an Elastic Foundation,”ASME Journal of Applied Mechanics, Vol. 23, pp. 195-200.
48.
48. Medwadowski, S. J., and Pister, K. S., 1958, “Strong Cylindrical Bending of Elastic Plates,”ASCE Journal of the Engineering Mechanics Division, Vol. 84, No. EM3, pp. 1692:1-1692:11.
49.
49. Salerno, V. L., and Goldberg, M. A., 1960, “Effect of Shear Deformation on Bending of Rectangular Plates,”ASME Journal of Applied Mechanics, Vol. 27, pp. 54-58.
50.
50. Voltera, E., 1960“Effect of Shear Deformation on Bending of Rectangular Plates,” Discussion, ASME Journal of Applied Mechanics, Vol. 27, No.3, pp.594-596.
51.
[Journal of Applied Mathematics and Mechanics, Vol. 26, No.4, pp. 1000-1025, 1963.]
52.
[Soviet Applied Mechanics, Vol. 3, No.5, pp. 48-51, 1967.]
53.
53. Reissner, E., 1947, “On Bending of Elastic Plates,”Quarterly of Applied Mathematics, Vol. 5, pp. 55-68.
54.
[Journal of Applied Mathematics and Mechanics, Vol. 40, No. 3, pp. 481-488, 1976.]
55.
55. Carley, T. G., and Langhaar, H. L., “Transverse Shearing Stress in Rectangular Plates,”Procs. ASCE, Journal of the Engineering Mechanics Division, Vol. 94, No. EM1, Feb. 1968.
56.
56. Goldenveizer, A. L., Kaplunov, J. D., and Nolde, E. V., 1993, “On Timoshenko-Reissner type Theories of Plates and Shells,”International Journal of Solids and Structures, Vol. 30, No. 5, pp. 675-694.
57.
57. Spear, P. R. S., and Kemp, K. O., 1977, “A simplified Reissner Theory for Plate Bending,”International Journal of Solids and Structures, Vol. 13, No. 11, pp. 1073-1079.
58.
58. Medwadowski, S. J., 1958, “A Refined Theory of Elastic Orthotropic Plates,”ASME Journal of Applied Mechanics, Vol. 25, pp. 437-443.
59.
59. Donnell, L. H., 1955, “A Theory for Thick Plates,”Procs. Second U. S. National Congress of Applied Mechanics, ASME Pub., University of Michigan, Michigan, pp. 369-373.
60.
60. Armanios, E. A., 1991, “Delamination Analysis for Laminated Composites I: Fundamentals,”ASCE Journal of Aerospace Engineering, Vol. 4, No. 2, pp. 194-215.
61.
61. Armanios, E. A., 1991, “Delamination Analysis for Laminated Composites II: Numerical Verification,”ASCE Journal of Aerospace Engineering, Vol. 4, No. 2, pp. 216-235.
62.
62. Pryor, C. W. Jr., Barker, R. M., and Frederick, D., 1970, “Finite Element Bending Analysis of Reissner Plates,”ASCE Journal of the Engineering Mechanics Division, Vol. 96, No. EM6, pp. 967-983.
63.
63. Alliney, S. and Carnicer, R. S., 1991, “A Finite Element Model for Mindlin Plates,”Computational Mechanics, Vol. 7, pp. 299-310.
64.
64. Chen, D. P., and Pan, Y. S., 1986, “Formulation of Reissner-Mindlin Moderately Thick/Thin Plate Bending Elements,”Proceedings of the International Conference on Computational Mechanics, Vol. 1, Ed. by Yagawa, G. and Atluri, S. N., Tokyo, pp. I:13-18.
65.
65. Naghdi, P. M., 1957, “On the Theory of Thin Elastic Shells,”Quarterly of Applied Mathematics, Vol. 14, pp. 369-380.
66.
66. Pister, K. S., and Westmann, R. A., 1962, “Bending of Plates on an Elastic Foundation,”ASME Journal of Applied Mechanics, Vol. 29, No. 2, pp. 369-374.
67.
67. Whitney, J. M., and Sun, C. T., 1973, “A Higher Order Theory for Extensional Motion of Laminated Composites,”Journal of Sound and Vibration, Vol. 30, No. 1, pp. 85-97.
68.
68. Nelson, R. B., and Lorch, D. R., 1974, “A Refined Theory for Laminated Orthotropic Plates,”{\it ASME Journal of Applied Mechanics, Vol. 41, pp. 177-183.
69.
69. Basset, A. B., 1890, “On the Extension and Flexure of Cylindrical and Spherical Thin Elastic Shells,”Philosophical Transactions of the Royal Society of London, Series A, Vol. 181, No. 6, pp. 433-480.
70.
70. Lee, C. W., and Donnell, L. H., 1958, “A Study of the Thick Plates under Tangential Loads Applied on the Faces,”Proceedings of the 3rd U.S. National Congress of Applied Mechanics, ASME Publ., New York, pp. 401-409.
71.
[Journal of Applied Mathematics and Mechanics, Vol. 26, No. 2, pp. 495-502, 1962.]
[Journal of Applied Mathematics and Mechanics, Vol. 26, No. 2, pp. 478-486, 1962.]
74.
[Journal of Applied Mathematics and Mechanics, Vol. 28, No. 6, pp. 1247-1254, 1964.]
75.
75. Reissner, E., 1963, “On the Derivation of Boundary Conditions for Plate Theory,”Proceedings of Royal Society of London, Series A, No. 1364, Vol. 276, pp. 178-186.
76.
76. Provan, J. W., and Koeller, R. C., 1970, “On the Theory of Elastic Plates,”International Journal of Solids and Structures, Vol. 6, pp. 933-950.
77.
77. Lo, K. H., Christensen, R. M., and Wu, E. M., 1977, “A High-Order Theory of Plate Deformation, Part-1: Homogeneous Plates,”ASME Journal of Applied Mechanics, Vol. 44, pp. 663-668.
78.
78. Lo, K. H., Christensen, R. M., and Wu, E. M., 1977, “A High-Order Theory of Plate Deformation, Part-2: Laminated Plates,”ASME Journal of Applied Mechanics, Vol. 44, pp. 669-676.
79.
79. Lo, K. H., Christensen, R. M., and Wu, E. M., 1978, “Stress Solution Determination for Higher Order Plate Theory,”International Journal of Solids and Structures, Vol. 14, pp. 655-662.
80.
80. Levinson, M., 1980, “An Accurate, Simple Theory of the Statics and Dynamics of Elastic Plates,”Mechanics: Research Communications, Vol. 7, No. 6, pp. 343-350.
81.
81. Murthy, M. V. V., 1981, “An Improved Transverse Shear Deformation Theory for Laminated Anisotropic plates,” NASA Tech. Paper 1903, pp. 1-37.
82.
82. Reddy, J. N., 1984a, “A Simple Higher Order Theory for Laminated Composite Plates,”ASME Journal of Applied Mechanics, Vol. 51, pp. 745-752.
83.
83. Blocki, J., 1992, “A Higher-Order Linear Theory for Isotropic Plates-I, Theoretical Considerations,”International Journal of Solids and Structures, Vol. 29, No. 7, pp. 825-836.
84.
84. Krenk, S., 1981, “Theories for Elastic Plates via Orthogonal Polynomials,”ASME Journal of Applied Mechanics, Vol. 48, No. 4, pp. 900-904.
85.
Refined Dynamical Theories of Beams, Plates, and Shells and Their Applications, I. Elishakoff and H. Irretier (Eds.), Springer-Verlag, Berlin, 1987, pp. 383-392.
86.
[Soviet Applied Mechanics, Vol. 6, No. 5, pp. 462-467, 1973.]
88. Kant, T., 1982, “Numerical Analysis of Thick Plates,”Computer Methods in Applied Mechanics and Engineering, Vol. 31, No. 1, pp. 1-18.
89.
[Soviet Applied Mechanics, Vol. 10, No. 11, pp. 1226-1230, 1976.]
90.
90. Lee, K. H., Senthilnathan, N. R., Lim, S. P., and Chow, S. T., 1989, “A simple Higher Order Nonlinear Shear Deformation Plate Theory,”International Journal of Nonlinear Mechanics, Vol. 24, No. 2, pp. 127-137.
91.
91. Hanna, N. F., and Leissa, A. W., 1994, “A Higher Order Shear Deformation Theory for the Vibration of Thick Plates,”Journal of Sound and Vibration, Vol. 170, No. 4, pp. 545-555.
92.
Refined Dynamical Theories of Beams, Plates, and Shells and Their Applications, Eds. Elishakoff, I. and Irretier, H., Springer-Verlag, Berlin, 1987, pp. 122-130.
93.
93. Kromm, von A., 1953, “Verallgemeinerte Theorie der Plattenstatik,”Ingenieur Archiv, Band XXI, Heft Viertes, pp. 266-286.
94.
94. Vlasov, B. F., 1957, “On the Equations of Theory of Bending of Plates,”Izv. AN SSSR, OMN, No. 2, pp. 57-60.
95.
95. Narasimha Murthy P., 1957, “The Effect of Transverse Shear Deformation and Rotatory Inertia in Wave Propogation and Vibration of Thin Elastic Plates,”Proceedings of the 3rd Congress on Theoretical and Applied Mechanics, Bangalore, India, pp. 351-360.
96.
96. Narasimha Murthy P., 1963, “Effect of Transverse Shear Deformation and Rotatory Inertia in Deflections of Beams and Plates,”Proceedings of the 8th Congress on Theoretical and Applied Mechanics, Delhi, India, pp. 33-50.
97.
97. Panc, V. V., 1964, “Verscharfte Theorie der Elastischen Platte,”Ingenieur Archiv, Band xxxiii, Heft Sechstes, pp. 351-371.
99. Reissner, E., 1975, “On Transverse Bending of Plates, Including the Effect of Transverse Shear Deformation,”International Journal of Solids and Structures, Vol. 11, pp. 569-573.
100.
100. Reissner, E., 1981, “A Note on Bending of Plates Including the effects of Transverse Shearing and Normal Strains,”ZAMP: Zeitschrift fur Angewandte Mathematik und Physik, Vol. 32, pp. 764-767.
101.
101. Krishna Murty, A. V., 1977, “Higher Order Theory for Vibrations of Thick Plates,”AIAA Journal, Vol. 15, No. 12, pp. 1823-1824.
102.
102. Krishna Murty, A. V., 1986, “Toward a Consistent Plate Theory,”AIAA Journal, Vol. 24, No. 6, pp. 1047-1048.
103.
103. Krishna Murty, A. V., 1987, “Theoretical Modelling of Laminated Composite Plates,”Sadhana, Vol. 11, Parts. 3-4, pp. 357-365.
104.
Refined Dynamical Theories of Beams, Plates, and Shells and Their Applications, I. Elishakoff and H. Irretier (Eds.), Springer-Verlag, Berlin, 1987, pp. 131-139.
105.
105. Lewinski, T., 1987, “On Refined Plate Models Based on Kinematical Assumptions,”Ingenieur Archiv, Vol. 57, No. 2, pp. 133-146,
106.
106. Krishna Murty, A. V., and Vellaichamy, S., 1988, “Higher-Order Theory of Homogeneous Plate Flexure,”AIAA Journal, Vol. 26, No. 6, pp. 719-725.
107.
107. Soldatos, K. P., 1988, “On Certain Refined Theories for Plate Bending,”ASME Journal of Applied Mechanics, Brief Notes, Vol. 55, No. 4, pp. 994-995.
108.
108. Savithri, S., and Varadan, T. K., 1992, “A Simple Higher Order Theory for Homogeneous Plates,”Mechanics: Research Communications, Vol. 19, No. 1, pp. 65-71.
109.
109. Reddy, J. N., 1990c, “A General Non-Linear Third-Order Theory of Plates with Moderate Thickness,”International Journal of Nonlinear Mechanics, Vol. 25, No. 6, pp. 677-686.
110.
110. Jemielita, G., 1990, “On Kinematical Assumptions of Refined Theories of Plates: A Survey,”ASME Journal of Applied Mechanics, Vol. 57, pp. 1088-1091.
111.
111. Jemielita, G., 1992, “Direct and Variational Methods in Forming of Plates,”Archives of Mechanics, Vol. 44, Issue 3, pp. 299-311.
112.
112. Bhimaraddi, A., and Stevens, L. K., 1984, “A Higher Order Theory for Free Vibration of Orthotropic, Homogeneous and Laminated Rectangular Plates,”ASME Journal of Applied Mechanics, Brief Note, Vol. 51, pp. 195-198.
113.
113. Bhimaraddi, A., and Stevens, L. K., 1986, “On the Higher Order Theories in Plates and Shells,”International Journal of Structures, Roorkee, India, Vol. 6, No. 1, pp. 35-50.
114.
114. Nair, L. S., Singh, G., and Rao, G. V., 1995, “Stability of Shear Deformable Rectangular Plates Using Refined Element Model,”Computer and Structures, Vol. 55, No. 5, pp. 877-881.
115.
115. Nair, L. S., Singh, G., and Rao, G. V., 1996, “Stability of Laminated Composite Plates Subjected to Various Types of In-plane Loadings,”International Journal of Mechanical Sciences, Vol. 38, No. 2, pp. 191-202.
116.
116. Ambartsumyan, S. A., 1958, “On the Theory of Anisotropic Shells and Plates.”Proceedings of the International Union of Theoretical and Applied Mechanics on Non-Homogeniety in Elasticity and Plasticity Symposium, Ed. by Olszak, W., Warsaw, Paper No. 1, pp. 83-94.
117.
[Journal of Applied Mathematics and Mechanics, Vol. 24, No. 2, pp. 500-514, 1960.]
118.
[Journal of Applied Mathematics and Mechanics, Vol. 27, No. 4, pp. 1156-1163, 1963.]
119.
[Theory of Anisotropic Plates, original Russian Ed., Izd. Nauka, Moskva, 1967.]
120.
120. Reissner, E., 1970, “A Note on Pure Bending and Flexure in Plane Stress Including the Effect of Moment Stresses,”Ingenieur Archiv, Band 39, pp. 369-374.
121.
121. Reissner. E., 1983, “A Twelvth Order Theory of Transverse Bending Transversely Isotropic Plates,”ZAMM: Zeitschrift fur Angewandte Mathematik und Mechanik or Journal of Applied Mathematics and Mechanics, Vol. 63, pp. 285-289.
122.
122. Reissner, E., 1987, “On a Generalization of Some Formulas of the Theory of Moderately Thick Elastic Plates,”International Journal of Solids and Structures, Vol. 23, No. 6, pp. 711-717.
123.
123. Reissner, E., 1991, “A Mixed Variational Equation for 12th Order Theory of Nonhomogeneous Transverse Isotropic Plates,”Journal of Computational Mechanics, Vol. 7, pp. 255-260.
124.
[Soviet Applied Mechanics, Vol. 2, No. 7, pp. 41-44, 1966.]
125.
125. Voyiadjis, G. Z., and Baluch, M. H., 1981, “Refined Theory for Flexural Motions of Isotropic Elastic Plates,”Journal of Sound and Vibration, Vol. 76, No. 1, pp. 57-64.
126.
126. Baluch, M. H., Voyiadjis, G. Z., and Azad, A. K., 1984, “A Refined Theory for Isotropic Plates,”Transactions of the CSME, Vol. 8, No. 1, 1984, pp. 21-27.
127.
127. Voyiadjis, G. Z., Baluch, M. H., and Chi, W. K., 1985, “Effects of Shear and Normal Strain on Plate Bending,”ASCE Journal of the Engineering Mechanics Division, Vol. 111, No. 9, pp. 1130-1143.
128.
128. Voyiadjis, G. Z., and Pecquet, R. W. Jr, 1987, “Isotropic Plate Elements with Shear and Normal Strain Deformation,”International Journal for Numerical Methods in Engineering, Vol. 24, No. 9, pp. 1671-1695.
129.
129. Voyidjis, G. Z., and Kattan, P. I., 1986, “Thick Rectangular Plates on an Elastic Foundation,”ASCE Journal of Engineering Mechanics, Vol. 112, No. 11, pp. 1218-1240.
130.
130. Voyiadjis, G. Z., and Kattan, M. H., 1990, “Bending of Thick Plates on Elastic Foundation,”Advances in the Theory of Plates and Shells, Ed. by Voyiadjis, G. Z., and Karamanlidis, D., Studies in Applied Mechanics—24, Amsterdam, Elsevier, pp. 87-121.
131.
131. Muhammad, A. K., Baluch, M. H., and Azad, A. K., 1990, “Generalised Theory for Bending of Thick Plates,”Advances in the Theory of Plates and Shells, Ed. by Voyiadjis, G. Z., and Karamanlidis, D., Studies in Applied Mechanics—24, Amsterdam, Elsevier, pp. 45-61.
132.
132. Reissner, E., 1950, “On a Variational Theorem in Elasticity,”Journal of Mathematics and Physics, Vol. 29, pp. 90-95.
133.
133. Reissner, E., 1953, “On Variational Theorem for Finite Elastic Deformation,”Journal of Mathematics and Physics, Vol. 32, pp. 129-135.
134.
134. Reissner, E., 1972, “A Consistent Treatment of Transvesre Shear Deformations in Laminated Anisotropic Plates,”AIAA Journal, Vol. 10, pp. 716-718.
135.
135. Reissner, E., 1984, “Formulation of Variational Theorems in Geometrically Nonlinear Elasticity,”ASCE Journal of Engineering Mechanics Division, Vol. 110, pp. 1377-1390.
136.
136. Reissner, E., 1985, “On Mixed Variational Formulations in Finite Elasticity,”Acta Mechanica, Vol. 56, No. 3-4, pp. 117-125.
137.
Refined Dynamical Theories of Beams, Plates, and Shells and Their Applications, I. Elishakoff and H. Irretier (Eds.), Springer-Verlag, Berlin, 1987, pp. 17-27.
138.
Refined Dynamical Theories of Beams, Plates, and Shells and Their Applications, I. Elishakoff and H. Irretier (Eds.), Springer-Verlag, Berlin, 1987, pp. 28-31.
139.
139. Reissner, E., 1986, “On a Mixed Variational Theorem and on Shear Deformable Plate Theory,”International Journal for Numerical Methods in Engineering, Vol. 23, pp. 193-198.
140.
140. Reissner, E., 1987, “On a Certain Mixed Variational Theorem and a Proposed Applications,”International Journal for Numerical Methods in Engineering, Short Communications, Vol. 20, pp. 1366-1368.
141.
141. Reissner, E., 1994, “On the Equations of an 8th Order Theory for Nonhomogeneous Transversely Isotropic Plates,”International Journal of Solids and Structures, Vol. 31, No. 1, pp. 89-96.
142.
142. Reissner, E., 1958, “On Variational Principles in Elasticity,”Proceedings of Symposium on Calculus of Variations, American Mathematical Society, McGraw-Hill Co., New-York.
143.
143. Pagano, N. J., 1978, “Stress Fields in Composite Laminates,”International Journal of Solids and Structures, Vol. 14, pp. 385-400.
144.
144. Chen, P. S., and Archer, R. R., 1989, “Solutions of a Twelfth order Thick Plate Theory,”Acta Mechanica, Vol. 79, pp. 97-111.
145.
145. Lewinski, T., 1990, “On the Twelfth Order Theory of Elastic Plates,”Mechaics: Research Communications, Vol. 17, No. 6, pp. 375-382.
146.
146. He, J. F., 1996, “A Twelfth-Order Theory of Antisymmetric Bending of Isotropic Plates,”International Journal of Mechanical Sciences, Vol. 38, No. 1, pp. 41-57.
147.
[International Applied Mechanics, Vol. 29, No. 12, pp. 1001-1007, 1994.]
148.
148. Cheng, S., 1979, “Elasticity Theory of Plates and a Refined Theory,”ASME Journal of Applied Mechanics, Vol. 46, pp. 644-650.
149.
149. Barret, K. E., and Ellis, S., 1988, “An Exact Theory of Elastic Plates, International Journal of Solids and Structures, Vol. 24, No. 9, pp. 859-880.
150.
150. Wang, F. Y., 1990, “Two-Dimensional Theories Deduced from Three-Dimensional Theory for a Transversely Isotropic Body-I. Plate Problems,”International Journal of Solids and Structures, Vol. 26, No. 4, pp. 455-470.
151.
151. Wang, F. Y., 1991, “Two-Dimensional Theories Deduced from Three-Dimensional Theory for a Transversely Isotropic Body-II. Plane Problems,”International Journal of Solids and Structures, Vol. 28, No. 2, pp. 161-177.
152.
152. Wang, W., and Shi, M. X., 1997, “Thick Plate Theory Based on General Solution of Elasticity,”Acta Mechanica, Vol. 123, pp. 27-36.
153.
153. Bisegna, P., and Sacco, E., 1997b, “A Rational Deduction of Plate Theories from Three-Dimensional Linear Elasticity,”ZAMM: Zeitschrift fur Angewandte Mathematik und Mechanik, Vol. 77, No. 5, pp. 319-366.
154.
154. Piltner, R., 1988, “The Application of a Complex 3-Dimensional Elasticity Solution Representation for the Analysis of a Thick Rectangular Plate,”Acta Mechanica, Vol. 75, No.1-4, pp. 77-91.
155.
155. Piltner, R., 1994, “Trefftz-type Boundary Elements for the Evaluation of Symmetric Coefficient Matrices,”Computational Mechanics, Vol. 15, No. 2, pp. 137-160.
156.
156. Vlasov, V. Z., 1957, “The Method of Initial Functions in Problems of Theory of Thick Plates and Shells,”Proceedings of 9th International Congress of Applied Mechanics, Brussels, pp. 321-330.
157.
157. Vlasov, V. V., 1962, “On one Solution of the Theory of Bending, Proceedings of the 4th All-Union Conference on The Theory of Shells and Plates, Erevan, USSR, pp. 300-306.
158.
[Balki, Plity i Obolochki na Uprugom Osnovanii. Gosudarstvennoe Izdatel’stvo Fiziko-Matematicheskoi Literatury, Moskva, 1960.]
159.
159. Iyengar, K. T. S. R., Chandrashekhara, K., and Sebastian, V. K., 1974, “On the Analysis of Thick Rectangular Plates,”Ingenieur Archiv, Band 43, Heft 5, pp. 317-330.
160.
[Soviet Applied Mechanics, Vol. 11, No. 1, May 1976, pp. 11-15.]
161.
161. Bahar, L. Y., 1975, “A State Space Approach to Elasticity,”Journal of the Franklin Institute, Vol. 299, No. 1, pp. 33-41.
162.
162. Rao, N. S. V. K., and Das, Y. C., 1977, “A Mixed Method in Elasticity,”ASME Journal of Applied Mechanics, Vol. 44, No. 1, pp. 51-56.
163.
163. Iyengar, K. T. S. R., and Pandya, S. K., 1983, “Analysis of Orthotropic Rectangular Thick Plates,”Fibre Science and Technology, Vol. 18, No. 1, pp. 19-36.
164.
164. Iyengar, K. T. S. R., and Pandya, S. K., 1986, “Application of the Method of Initial Functions for the Analysis of Composite Laminated Plates,”Ingenieur Archiv, Vol. 56, No. 6, pp. 407-416.
165.
165. Sun, W. J., and Archer, R. R., 1992, “Exact Solutions for Stress Analysis of Transversely Isotropic Elastic Layers,”Archive of Applied Mechanics, Vol. 62, No. 4, pp. 230-247.
166.
166. Vlasov, V. V., 1994, “One-Layer and Multi-Layer Strips and Plates under Local Loads,”Mechanics of Solids, Vol. 29, No. 4, pp. 178-185.
167.
English trans. North-Holland, Amsterdam, 1964.
168.
[Journal of Applied Mathematics and Mechanics, Vol. 27, No. 6, pp. 1621-1643, 1963.]
169.
[Journal of Applied Mathematics and Mechanics, Vol. 26, No. 4, pp. 1026-1039, 1962.]
170.
[Journal of Applied Mathematics and Mechanics, Vol. 27, No. 3, pp. 882-891, 1963.]
171.
[Journal of Applied Mathematics and Mechanics, Vol. 29, No. 5, pp. 1064-1083, 1965.]
172.
[Journal of Applied Mathematics and Mechanics, Vol. 31, No. 2, pp. 252-264,1967.]
173.
[Journal of Applied Mathematics and Mechanics, Vol. 32, No. 2, pp. 342-351, 1960.]
174.
[Soviet Applied Mechanics, Vol. 6, No. 5, pp. 449-454, 1973.]
175.
[Journal of Applied Mathematics and Mechanics, Vol. 40, No. 3, pp. 489-496, 1976.]
176.
176. Igarashi, S., and Takizawa, E. I., 1984, “On the Equation of Deflection of a Thick Plate,”Ingenieur Archiv, Vol. 54, pp. 465-475.
177.
177. Igarashi, S., 1988, “An Approximate Theory of Deformation of a Thick Plate (I): The case of an Isotropic Thick Plate,”Bulletin of the Japan Society of Precision Engineering, Vol. 22, No. 3, pp. 205-210.
178.
178. Igarashi, S., Shibukawa, K., and Ozaki, M., 1988, “An Approximate Theory of Deformation of a Thick Plate (II): The case of an Anisotropic Thick Plate,”Bulletin of the Japan Society of Precision Engineering, Vol. 22, No. 4, pp. 289-294.
179.
179. Igarashi, S., and Shibukawa, K., 1990, “A Refined Theory of Anisotropic Thick Plates,”Advances in the Theory of Plates and Shells, Ed. by Voyiadjis, G. Z., and Karamanlidis, D., Studies in Applied Mechanics—24, Amsterdam, Elsevier, pp. 27-44.
180.
[Journal of Applied Mathematics and Mechanics, Vol. 29, No. 1, pp. 151-166, 1965.]
181.
181. Friedrichs, K. O., and Dressler, R. F., 1961, “A Boundary-Layer Theory for Elastic Plates,”Communications on Pure and Applied Mathematics, Vol. XIV, No. 1-4, pp. 1-33.
182.
[Journal of Applied Mathematics and Mechanics, Vol. 29, No. 4, pp. 914-925, 1965.]
183.
183. Souchet, R., 1978, “Theorie Des Plaques En Elasticite Lineare Classique,”Journal de Mecanique, Vol. 17, No. 1, pp. 53-76.
184.
[Journal of Applied Mathematics and Mechanics, Vol. 43, No. 6, pp. 925-934, 1981.]
185.
185. Niordson, F. I., 1979, “An Asymptotic Theory for Vibrating Plates,”International Journal of Solids and Structures, Vol. 15, No. 2, pp. 167-181.
186.
186. Zimmermann, G., 1983, “On the Asymptotic Theory of Plates,”Acta Mechanica, Vol. 50, No. 1-2, pp. 49-58.
187.
187. Gregory, R. D., and Wan, F. Y. M., 1985, “On Plate Theories and Saint Venant’s Principle,”International Journal of Solids and Structures, Vol. 21, No. 10, pp. 1005-1024.
188.
[Journal of Applied Mathematics and Mechanics, Vol. 56, No. 5, pp. 645-650, 1992.]
189.
[Journal of Applied Mathematics and Mechanics, Vol. 32, No. 2, pp. 222-233, 1968.]
190.
[Journal of Applied Mathematics and Mechanics, Vol. 56, No. 5, pp. 637-644, 1992.]
191.
[Journal of Applied Mathematics and Mechanics, Vol. 56, No. 5, pp. 631-635, 1992.]
192.
192. Savoia, M., Laudiero, F., and Tralli, A., 1994, “A Two-Dimensional Theory for the Analysis of Laminated Plates,”Computational Mechanics, Vol. 14, No. 1, pp. 38-51.
193.
193. Hodges, D. H., Lee, B. W., and Atilgan, A. R., 1993, “Application of the Variational-Asymptotical Method to Laminated Composite Plates,”AIAA Journal, Vol. 31, No. 9, pp. 1674-1683.
194.
194. Sutyrin, V. G., and Hodges, D. H., 1996, “On Asymptotically Correct Linear Laminated Plate Theory,”International Journal of Solids and Structures, Vol. 33, No. 25, pp. 3649-3671.
195.
195. Sutyrin, V. G., 1997, “Derivation of Plate Theory Accounting Asymptotically Correct Shear Deformation,”ASME Journal of Applied Mechanics, Vol. 64, No. 4, pp. 905-915.
196.
196. Tarn, J. Q., 1997, “An Asymptotic Theory for Nonlinear Analysis of Multilayered Anisotropic Plates,”Journal of the Mechanics and Physics of Solids, Vol. 45, No. 7, pp. 1105-1120.
197.
197. Levy, M., 1877, “Memoire sur la Theorie des Plaques Elastiques Planes,”Journal des Mathematiques Pures et Appliquees, Vol. 30, pp. 219-306.
198.
198. Stein, M., 1986, “Nonlinear Theory for Plates and Shells Including the Effects of Transverse Shearing,”AIAA Journal, Vol. 24, pp. 1537-1544.
199.
199. Stein, M., 1989, Vibration of Beams and Plate Strips With Three-Dimensional Flexibility, ASME Journal of Applied Mechanics, Brief Notes, Vol. 56, No. 1, pp. 228-231.
200.
200. Stein, M., Sydow, P. D., and Librescu, L., 1990, “Postbuckling of Long Thick Plates in Compression including Higher Order Transverse Shearing Effects,”Advances in the Theory of Plates and Shells, Ed. by Voyiadjis, G. Z., and Karamanlidis, D., Studies in Applied Mechanics—24, Amsterdam, Elsevier, pp. 63-86.
201.
[Soviet Applied Mechanics, Vol. 3, No. 8, pp. 7-11, 1967.]
202.
[Soviet Applied Mechanics, Vol. 10, No. 9, pp. 992-997, 1976.]
203.
203. Pecastaings, P. F., 1987, “Approimation au Second Ordre des Desplacements et des Contraintes dans une Plaque Epaisse en Flexion,”ZAMP: Zeitschrift fur Angewandte Mathematik und Physics, Vol. 38, pp. 893-904.
204.
204. Ladeveze, P., and Pecastaings, F., 1988, “The Optimal Version of Reissner’s Theory,”ASME Journal of Applied Mechanics, Vol. 55, No. 2, pp. 413-418.
205.
205. Chen, Y. C., and Rajagopal, K. R., 1989, “Stability of Deformation of an Elastic Layer,”Archive for Rational Mechanics and Analysis, Vol. 108, No. 1, pp. 1-9.
206.
[Soviet Applied Mechanics, Vol. 8, No. 6, pp. 583-595, 1974.]
207.
207. Reissner, E., 1985, “Reflections on the Theory of Elastic Plates,”Applied Mechanics Reviews, Vol. 38, pp. 1453-1464.
208.
208. Reddy, J. N., and Chandrashekhara, K., 1987, “Recent Advances in the Nonlinear Analysis of Laminated Composite Plates and Shells,”Shock and Vibration Digest, Vol. 19, No. 4, pp. 3-9.
209.
209. Reddy, J. N., 1986, “On Mixed Finite Element Formulations of a Higher Order Theory of Composite Laminates,”Finite Element Methods for Plate and Shell Structures: Formulations and Algorithms, Edited by Hugesh, T. J. R., and Hinton, E., Vol. 2, Chapter 2, pp. 31-57.
210.
210. Reddy, J. N., 1989a, “On the Generalization of Displacement-Based Laminate Theories,”Applied Mechanics Reviews, Vol. 42, pp. S213-S222.
211.
211. Reddy, J. N., 1989b, “On Refined Computational Models of Composite Laminates,”International Journal for Numerical Methods in Engineering, Vol. 27, pp. 361-382.
212.
212. Reddy, J. N., 1990a, “A Review of Refined Theories of Laminated Composite Plates,”Shock and Vibration Digest, Vol. 22, No. 7, pp. 3-17.
213.
213. Reddy, J. N., 1990b, “On Refined Theories of Composite Laminates,”Meccanica, Vol. 25, pp. 230-238.
214.
214. Reddy, J. N., 1993, “An Evaluation of Equivalent-Single Layer and Layerwise Theories of Composite Laminates,”Composite Structures, Vol. 25, No. 1-4, pp. 21-35.
215.
215. Reddy, J. N., and Robbins, D. H., 1994, “Theories and Computational Models for Composite Laminates,”Applied Mechanics Reviews, Vol. 47, pp. 147-169.
216.
216. Kapania, R. K., and Raciti, S., 1989, “Recent Advances in Analysis of Laminated Beams and Plates: Part-I and Part-II,”AIAA Journal, Vol. 27, pp. 923-946.
217.
[Soviet Applied Mechanics, Vol. 27, No. 11, pp. 1035-1057, 1992.]
218.
218. Nemish, Yu. N., and Khoma, I. Yu., 1993, “Stress-Strain State of Non-Thin Plates and Shells, Generalised Theory (Survey),”International Applied Mechanics, Vol.29, No. 11, pp. 873-902.
219.
229. Mallikarjuna and Kant, T., 1993, “A Critical Review and some Results of Recently Developed Refined Theories of Fiber-Reinforced Laminated Composites and Sandwiches,”Composite Structures, Vol. 23, pp. 293-312.
220.
220. Noor, A. K., Burton, W. S., and Bert, C. W., 1996, “Computational Models for Sandwich Panels and Shells,”Applied Mechanics Reviews, Vol. 49, pp. 155-199.
221.
221. Liu, D., and Li, X., 1996, “An Overall View of Laminate Theories Based on Displacement Hypothesis,”Journal of Composite Materials, Vol. 30, No. 4, pp. 1539-1561.
222.
222. Liew, K. M., Xiang, Y., and Kitipornchai, S., 1995, “Research on Thick Plate Vibration: A Literature Survey,”Journal of Sound and Vibration, Vol. 180, No. 1, pp. 163-176.
223.
223. Varadan, T. K., and Bhaskar, K., 1997, “Review of Different Laminate Theories for the Analysis of Composites,”Journal of the Aeronautical Society of India, Vol. 49, No. 4, pp. 202-208.
224.
224. Reissner, E., and Stavsky, Y., 1961, “Bending and Stretching of Certain Types of Heterogeneous Aeolotropic Elastic Plates,”ASME Journal of Applied Mechanics, Vol. 28, pp. 402-408.
225.
225. Stavsky, Y., 1961, “Bending and Stretching of Laminated Aeolotropic Plates,”ASCE Journal of the Engineering Mechanics Division, Vol. 87, No. EM6, pp. 31-56.
226.
226. Dong, S. B., Pister, K. S., and Taylor, R. L., 1962, “On the Theory of Laminated Anisotropic Shells and Plates,”Journal of Aerospace Science, Vol. 29, pp. 969-975.
227.
227. Lekhnitskii, S. G., 1957, Anisotropic Plates, 2nd ed., Moscow, Translated from Russian by S. W. Tsai and T. Cheron, Gordon and Breach, New York, 1968.
228.
[Soviet Applied Mechanics, Vol. 4, No. 1, pp. 29-32, 1968.]
229.
229. Whitney, J. M., and Leissa, A. W., 1969, “Analysis of Heterogeneous Anisotropic Plates,”ASME Journal of Applied Mechanics, Vol. 36, pp. 261-266.
230.
230. Whitney, J. M., 1969, “The Effect of Transverse Shear Deformation on the Bending of Laminated Plates,”Journal of Composite Materials, Vol. 3, pp. 534-547.
231.
231. Whitney, J. M., 1969, “Bending-Extensional Coupling in Laminated Plates Under Transverse Loading,”Journal of Composite Materials, Vol. 3, pp. 20-28
232.
232. Whitney, J. M., 1969, “Cylindrical Bending of Unsymmetrically Laminated Plates,”Journal of Composite Materials, Vol. 3, pp. 715-719.
233.
[Soviet Applied Mechanics, Vol. 10, No. 12, pp. 1300-1305, 1976.]
234.
234. Konieczny, S., and Wozniak, Cz., 1994, “Corrected 2D-Theories for Composite Plates,”Acta Mechanika, Vol. 103, No. 1-4, pp. 145-155.
235.
235. Wang, Y. Y., Lam, Y. K., Liu, R. R., Reddy, J. N., and Tani, J., 1997, “A Strip Element Method for Bending Analysis of Orthotropic Plates,”JSME International Journal, Series A, Vol. 40, pp. 398-406.
236.
236. Pagano, N. J., 1969, “Exact Solutions for Composite Laminates in Cylindrical Bending,”Journal of Composite Materials, Vol. 3, pp. 398-411.
237.
237. Pagano, N. J., 1970, “Exact Solutions for Rectangular Bidirectional Composites and Sandwich Plates,”Journal of Composite Materials, Vol. 4, pp. 20-34.
238.
238. Pagano, N. J., 1970, “Influence of Shear Coupling in Cylindrical Bending of Anisotropic Laminates,”Journal of Composite Materials, Vol. 4, pp. 330-343.
239.
239. Reissner, E., 1979, “A Note on the Effect of Transverse Shear Deformation in Laminated Anisotropic Plates,”Computer Methods in Applied Mechanics and Engineering, Vol. 20, pp. 203-209.
240.
240. Qi, Y., and Knight, N. F., 1996, “A Refined First Order Shear Deformation Theory and its Justification by Plane-strain Bending Problem of Laminated Plates,”International Journal of Solids and Structures, Vol. 33, pp. 49-64.
241.
241. Knight, N. F. Jr, and Qi, Y., 1997a, “On a Consistent First Order Shear Deformation Theory for Laminated Plates,”Composites, Part B, Vol. 28B, pp. 397-405.
242.
242. Knight, N. F. Jr, and Qi, Y., 1997b, “Restatement of First-Order Shear Deformation Theory for Laminated Plates,”International Journal of Solids and Structures, Vol. 34, No. 4, pp. 481-492.
243.
243. Wang, A. S. D., and Chou, P. C., 1972, “A Comparison of Two Laminated Plate Theories,”ASME Journal of Applied Mechanics, Vol. 39, No. 2, pp. 611-613.
244.
244. Sun, C. T., and Whitney, J. M., 1973, “Theories for the Dynamic Response of Laminated Plates,”AIAA Journal, Vol. 11, No. 2, pp. 178-183.
245.
245. Chow, T. S., 1971, “On the Propogation of Flexural Waves in an Orthotropic Laminated Plate and its Response to an Impulsive Load,”Journal of Composite Materials, Vol. 5, pp. 306-319.
246.
246. Chow, T. S., 1975, “Theory of Unsymmetric Laminated Plates,”Journal of Applied Physics, Vol. 46, No. 1, pp. 219-221.
247.
247. Pryor, C. W. Jr., and Barker, R. M., 1971, “Finite Element Analysis including Shear Deformation Effects for application to Laminated Plates,”AIAA Journal, Vol. 9, No. 5, pp. 912-917.
248.
248. Hinton, E., 1975“The Flexural Analysis of Laminated Composites using a Parabolic Isotropic Plate Bending Element,”International Journal of Numerical Methods in Engineering, Short Communications, pp. 174-179.
249.
249. Reddy, J. N., and Chao, W. C., 1981, “A Comparison of Closed-Form and Finite-Element Solutions of Thick Laminated Anisotropic Rectangular Plates,”Nuclear Engineering and Design, Vol. 64, No. 2, pp. 153-167.
250.
250. Owen, D. R. J. and Li, Z. H., 1987, “A Refined Analysis of Laminated Plates by finite Element Displacement Methods I: Fundamentals and Static Analysis,”Computers and Structures, Vol. 26, No. 6, pp. 907-914.
251.
251. Rolfes, R., and Rohwer, K., 1997, “Improved Transverse Shear Stresses in Composite Finite Elements based on First-Order Shear Deformation Theory,”International Journal for Numerical Methods in Engineering, Vol. 40, No. 1, pp. 51-60.
252.
252. Ha, K. H., 1990, “Finite Element Analysis of Sandwich Plates: An Overview,”Computers and Structures, Vol. 37, No. 4, pp. 397-403.
253.
253. Byun, C., and Kapania, R. K., 1992, “Prediction of Interlaminar Stresses in Laminated Plates using Global Orthogonal Interpolation Polynomials,”AIAA Journal, Vol. 30, No. 11, pp. 2740-2749.
254.
254. Dobyns, A. L., 1981, “Analysis of Simply Supported Orthotropic Plates Subjected to Static and Dynamic Loads,”AIAA Journal, Vol. 19, No. 5, pp. 642-650.
255.
255. Turvey, G. J., 1977, “Bending of Laterally Loaded, Simply Supported, Moderately Thick, Antisymmetrically Laminated Rectangular Plates,”Fibre Science and Technology, Vol. 10, No. 3, pp. 211-232.
256.
256. Kabir, H. R. H., 1996, “A Novel Approach to the Solution of Shear Flexible Rectangular Plates with Arbitrary Laminations,”Composites, Part B, Vol. 27B, pp. 95-104.
257.
257. Whitney, J. M., 1973, “Shear Correction Factors for Orthotropic Laminates under Static Load,”ASME Journal of Applied Mechanics, Vol. 40, No. 1, pp. 303-304.
258.
258. Chatterjee, S. N., and Kulkarni, S. V., 1979, “Shear Correction Factors for Laminated Plates,”AIAA Journal, Vol. 17, pp. 498-499.
259.
259. Vlachoutsis, S., 1992, “Shear Correction Factors for Plates and Shells,”International Journal for Numerical Methods in Engineering, Vol. 33, No. 7, pp. 1537-1552.
260.
260. Engblom, J. J., and Ochoa, O. O., 1985, “Through-the-Thickness Stress Predictions for Laminated Plates of Advanced Composite Materials,”International Journal for Numerical Methods in Engineering, Vol. 21, No. 10, pp. 1759-1776.
261.
261. Kwon, Y. W., and Akin, J. E., 1987, “Analysis of Layered Composite Plates using a High-Order Deformation Theory,”Computers and Structures, Vol. 27, No. 5, pp. 619-623.
262.
262. Fares, M. E., 1993, “A Refined Two-Dimensional Theory of Anisotropic Plates,”Mechanics: Research Communications, Vol. 20, No. 4, pp. 319-327.
263.
263. Tessler, A., 1993, “An Improved Plate Theory for {1,2}-Order for Thick Composite Laminates,”International Journal of Solids and Structures, Vol. 30, No. 7, pp. 981-1000.
264.
264. Sadek, E. A., 1998, “Some Serendipity Finite Elements for the Analysis of Laminated Plates,”Computers and Structures, Vol. 69, No. 1, pp. 37-51.
265.
265. Kant, T., and Pandya, B. N., 1988, “A Simple Finite Element Formulation of a Higher-Order Theory for Unsymmetrically Laminated Composite Plates,”Composite Structures, Vol. 9, No. 3, pp. 215-246.
266.
266. Pandya, B. N., and Kant, T., 1987, “A Consistent Refined Theory for Flexure of a Symmetric Laminate,”Mechanics: Research Communications, Vol. 14, No. 2, pp. 107-113.
267.
267. Pandya, B. N., and Kant, T., 1988, “A Refined Higher-Order Generally Orthotropic Co Plate Bending Element,”Computers and Structures, Vol. 28, No. 2, pp. 119-133.
268.
268. Pandya, B. N., and Kant, T., 1988, “Flexural Analysis of Laminated Composites using Higher Order Co Plate Bending Elements,”Computer Methods in Applied Mechanics and Engineering, Vol. 66, pp. 173-198.
269.
269. Pandya, B. N., and Kant, T., 1988, “Finite Element Analysis of Laminated Plates using a Higher-Order Displacement Model,”Composites Science and Technology, Vol. 32, pp. 137-155.
270.
270. Mallikarjuna and Kant, T., 1989, “Free Vibration of Symmetrically Laminated Plates using a Higher Order Theory with Finite Element Technique,”International Journal of Numerical Methods in Engineering, Vol. 28, pp. 1875-1889.
271.
271. Kant, T., and Mallikarjuna, 1989, “A Higher Order Theory for Free Vibration of Unsymmetrically Laminated Composite and Sandwich Plates: Finite Element Evaluations,”Computers and Structures, Vol. 32, pp. 1125-1132.
272.
272. Chomkwah, V., and Avula, X. J. R., 1990, “A High Order Theory for Laminated Composite Plates using Lagrange Multiplier Technique,”Computers and Structures, Vol. 37, No. 5, pp. 845-861.
273.
273. Kant, T., and Manjunatha, B. S., 1994, “On Accurate Evaluation of Transverse Stresses in Multilayer Laminates,”Computers and Structures, Vol. 50, No. 3, pp. 351-365.
274.
274. Kant, T., and Kommineni, J. R., 1994, “Nonlinear Analysis of Angleply Composite and Sandwich Laminates,”ASCE Journal of Aerospace Engineering, Technical Note, Vol. 7, No. 3, pp. 342-352.
275.
275. Chang, J. S., 1990, “Finite Element Analysis of Buckling and Thermal Buckling of Antisymmetric Angleply Laminates according to Transverse Shear and Normal Deformable High Order Displacement Theory,”Computers and Structures, Vol. 37, No. 6, pp. 925-946.
276.
276. Chang, J. S., and Huang, Y. P., 1991, “Geometrically Nonlinear Static and Transiently Dynamic behaviour of Laminated Composite Plates based on a Higher Order Displacement Field,”Journal of Composite Structures, Vol. 18, pp. 327-364.
277.
277. Paul, T. K., and Rao, K. M., 1992, “Stress Analysis of a Thick Fibre Reinforced Plastic Laminated Square Plate Containing Two Elliptical Holes under Transverse Uniform Loading,”Computers and Structures, Vol. 43, No. 2, pp. 343-349.
278.
278. Paul, T. K., and Rao, K. M., 1993, “Finite Element Evaluation of Stress Concentration factor of Thick Laminated Plates under Transverse Loading,”Computers and Structures, Vol. 48, No. 2, pp. 311-317.
279.
279. Mohan, P. R., and Naganarayana, B. P., 1994, “Consistent and Variationally Correct Finite Elements for Higher-Order Laminated Plate Theory,”Composite Structures, Vol. 29, pp. 445-456.
280.
280. Maiti, D. K., and Sinha, P. K., 1996a, “Bending, Free Vibration and Impact Response of Thick Laminated Composite Plates,”Computers and Structures, Vol. 59, No. 1, pp. 115-129.
281.
281. Maiti, D. K., and Sinha, P. K., 1996b, “Low Velocity Impact Analysis of Composite Sandwich Shells using Higher-Order Shear Deformation Theories,”Sadhana, Vol. 21, Part 5, pp. 597-622.
282.
282. Rohwer, K., 1992, “Application of Higher-Order Theories to the Bending Analysis of Layered Composite Plates,”International Journal of Solids and Structures, Vol. 29, No. 1, pp. 105-119.
283.
283. Basar, Y., Ding, Y., and Schultz, R., 1993, “Refined Shear Deformation Models for Composite Laminates with the Finite Rotations,”International Journal of Solids and Structures, Vol. 30, No. 19, pp. 2611-2638.
284.
284. Tseng, Y. P., and Wang, W. J., 1993, “A Refined Finite Strip Method Using Higher-Order Plate Theory,”International Journal of Solids and Structures, Vol. 30, No. 3, pp. 441-452.
285.
285. Soldatos, K. P., and Watson, P., 1997, “A Method for Improving the Stress Analysis Performance of One-and Two-Dimensional Theories for Laminated Composite,”Acta Mechanica, Vol. 123, pp. 163-186.
286.
286. Librescu, L., 1967, “On the Theory of Anisotropic Elastic Shells and Plates,”International Journal of Solids and Structutres, Vol. 3, No. 1, pp. 53-68.
287.
287. Shirakawa, K., 1983, “Bending of Plates Based on Improved Theory,”Mechanics: Research Communications, Vol. 10, No. 4, pp. 205-211.
288.
288. Reddy, J. N., 1984b, “A Refined Nonlinear Theory of Plates with Transverse Shear Deformation,”International Journal of Solids and Structures, Vol. 20, No. 9-10, pp. 881-896.
289.
289. Reddy, J. N., 1984c, Energy and Variational Methods in Applied Mechanics, John Wiley and Sons, New York.
290.
290. Reddy, J. N., and Phan, N. D., 1985, “Analysis of Laminated Composite Plates using a Higher Order Shear Deformation Theory,”International Journal of Numerical Methods in Engineering, Vol. 21, pp. 2201-2219.
291.
291. Liu, R. H. and He, L. H., 1991, “A Simple Theory for Non-Linear Bending of Laminated Composite Rectangular Plates Including Higher Order Effects,”International Journal of Non-Linear Mechanics, Vol. 26, No. 5, pp. 537-545.
292.
292. Reddy, J. N., 1986, “Mixed Variational Formulations of Various Theories of Laminated Composite Plates,”Proceedings of the International Conference on Computational Mechanics, Vol. 1, Ed. by Yagawa, G., and Atluri, S. N., Tokyo, pp. IV:213-IV:223.
293.
293. Doong, J. L., Fung, C. P., and Lee, C., 1989, “Stress Analysis of a Composite Plate based on a New Plate Theory,”Proceedings of the 5th International Conference on Composite Structures, Edited by Marshall, I. H., Scotland., Elsevier Applied Science, London, pp. 521-533.
294.
294. Rychter, Z., 1992, “A Family of Accurate Plate Theories,”Mechanics: Research Communications, Vol. 19, No. 6, pp. 505-510.
295.
295. Sun, L. and Shi, Z., 1992, “The Analysis of Laminated Composite Plates Based on the Simple Higher Order Theory,”Computers and Structures, Vol. 43, No. 5, pp. 831-837.
296.
296. Savithri, S., and Varadan, T. K., 1993, “Large Deflection Analysis of Laminated Composite Plates,”International Journal of Nonlinear Mechanics, Vol. 28, No. 1, pp. 1-12.
297.
297. Carvelli, V. and Savoia, M., 1997, “Assessment of Plate Theories for Multilayered Angle-ply Plates,”Composite Structures, Vol. 39, No. 3-4, pp. 197-207.
298.
298. Phan, N. D., and Reddy, J. N., 1985, “Analysis of Laminated Composite Plates Using a Higher Order Shear Deformation Theory,”International Journal for Numerical Methods in Engineering, Vol. 21, pp. 2201-2219.
299.
299. Khdeir, A. A., Reddy, J. N., and Librescu, L., 1987, “Analytical Solution of a Refined Shear Deformation Theory for Rectangular Composite Plates,”International Journal of Solids and Structures, Vol. 23, No. 10, pp. 1447-1463.
300.
300. Khdeir, A. A., and Reddy, J. N., 1991, “Analytical Solutions of Refined Plate Theories of Cross-Ply Composite Laminates,”ASME Journal of Pressure Vessel Technology, Vol. 113, No. 4, pp. 570-578.
301.
301. Shankara, C. A., and Iyengar, N. G. R., 1992, “Analysis of Composite Plates with Higher Order Shear Deformation Theory,”Mechanics: Research Communications, Vol. 19, No. 4, pp. 301-314.
302.
302. Shu, X., and Sun, L., 1994, “An Improved simple Higher-order Theory for Laminated Composite Plates,”Computers and Structures, Vol. 50, No. 2, pp. 231-236.
303.
303. Bose, P. and Reddy, J. N., 1998, “Analysis of Composite Plates Using Various Plate Theories Part 1: Formulation and Analytical Solutions,”Structural Engineering and Mechanics, Vol. 6, No. 6, pp. 583-612.
304.
304. Bose, P. and Reddy, J. N., 1998, “Analysis of Composite Plates Using Various Plate Theories Part 2: Finite Element Model and Numerical Results,”Structural Engineering and Mechanics, Vol. 6, No. 6, pp. 727-746.
305.
305. Osternik, E. S., and Barg, Y. A., 1962, “Engineering Methods of Calculating Laminated Anisotropic Plates,”Proceedings of the 4th All-Union Conference on The Theory of Shells and Plates, Erevan, USSR, pp. 699-738.
306.
306. Peshtmaldzhyan, D. V., 1962, “Refined Solution of the Problem of Bending of Orthotropic Cylindrical Panels and Plates,”Proceedings of the 4th All-Union Conference on The Theory of Shells and Plates, Erevan, USSR, pp. 733-738.
307.
[Soviet Aeronautics, Vol. 13, No. 4, pp. 37-43, 1972.]
308.
[Soviet Applied Mechanics, Vol. 14, No. 7, pp. 3-21.]
309.
[Soviet Applied Mechanics, Vol. 20, No. 5, pp. 465-469, 1984.]
310.
310. Rehfield, L. W., and Valisetty, R. R., 1984, “A simple Refined Theory for Bending and Stretching of Homogeneous Plates,”AIAA Journal, Vol. 22, No. 1, pp. 90-95.
311.
311. Valisetty, R. R., and Rehfield, L. W., 1985, “A Theory for Stress Analysis of Composite Laminates,”AIAA Journal, Vol. 23, pp. 1111-1117.
312.
[Soviet Applied Mechanics, Vol. 19, No. 7, pp. 633-638, 1984.]
313.
313. Ren, J. G., 1986, “A New Theory of Laminated Plate,”Composite Science and Technology, Vol. 26, pp. 225-239.
314.
314. Ren, J. G., 1986, “Bending Theory of Laminated Plate,”Composites Science and Technology, Vol. 27, No. 3, pp. 225-248.
315.
315. Ren, J. G., 1987, “Bending of Simply-Supported, Antisymmetrically Laminated Rectangular Plate under Transverse Loading,”Composites Science and Technology, Vol. 28, No. 3, pp. 231-243.
316.
316. Voyiadjis, G. Z., and Baluch, M. H., 1988, “Refined Theory for Thick Composite Plates,”ASCE Journal of Engineering Mechanics Division, Vol. 114, pp. 671-687.
317.
Part II Vibrations, Vol. 35, No. 14, pp. 1575-1587.
318.
[Soviet Applied Mechanics, Vol. 24, No. 6, pp. 608-613, 1988.]
319.
[Soviet Applied Mechanics, Vol. 21, No. 5, pp. 491-498, 1985.]
320.
[Mechanics of Solids, Vol. 14, No. 1, pp. 129-136, 1979.]
321.
321. Jakobsen, T. B., and Jensen, J. K., 1987, “3-D Stress Distribution: A Finite Element Approach,”6th International Conference on Composite Materials, ICCM and ECCM, Vol. 5, Ed. by Mathews, F. L., et al., London, pp. 5:211-5:218.
322.
322. Stein, M., and Jegley, D. C., 1987, “Effects of Transverse Shearing on Cylindrical Bending, Vibration, and Buckling of Laminated Plates,”AIAA Journal, Vol. 25, No. 1, pp. 123-129.
323.
323. Jegley, D. C., 1988, “An Analytical Study of the Effects of Transverse Shear Deformation and Anisotropy on Natural Vibration Frequencies of Laminated Cylinders,”Proceedings of the 4th Japan-U.S. Conference on Composite Materials, Washington, D.C., pp. 380-389.
324.
324. Stein, M., and Bains N. J. C., 1990, “Postbuckling Behaviour of Longitudinally Compressed Orthotropic Plates with Transverse Shearing Flexibility,”AIAA Journal, Vol. 28, No. 5, pp. 892-895.
325.
325. Touratier, M., 1991, “An Efficient Standard Plate Theory,”International Journal of Engineering Science, Vol. 29, No. 8, pp. 901-916.
326.
326. Touratier, M., 1992, “A Generalisation of Shear Deformation Theories for Axisymmetric Multi-layered Shells,”International Journal of Solids and Structures, Vol. 29, No. 11, pp. 1379-1399.
327.
327. Touratier, M., 1992, “A refined Theory of Laminated Shallow Shells,”International Journal of Solids and Structures, Vol. 29, No. 11, pp. 1401-1415.
328.
328. Soldatos, K. P., 1992, “A Transverse Shear Deformation Theory for Homogeneous Monoclinic Plates,”Acta Mechanica, Vol. 94, No. 3-4, pp. 195-220.
329.
329. Beakou, A., and Touratier, M., 1993, “A Rectangular Finite Element for Analysing Composite Multilayered Shallow Shells in Statics, Vibration and Buckling,”International Journal for Numerical Methods in Enineering, Vol. 36, No. 4, pp. 627-653.
330.
330. Becker, W., 1993, “Closed-Form Solution for the Free-Edge Effect in Cross-Ply Laminates,”Composite Structures, Vol. 26, No. 1-2, pp. 39-45.
331.
331. Becker, W., 1994, “Closed-Form Analysis of the Free Edge Effect in Angle-Ply Laminates,”ASME Journal of Applied Mechanics, Brief Note, Vol. 61, pp. 209-211.
332.
332. Muller, P., and Touratier, M., 1995, “On the So-called Variational Consistency of Plate Models, I. Indefinite Plates: Evaluation of Dispersive Behaviour,”Journal of Sound and Vibration, Vol. 188, No. 4, pp. 515-527.
333.
333. Idlbi, A., Karama, M., and Touratier, M., 1997, “Comparison of Various Laminated Plate Theories,”Composite Structures, Vol. 37, No. 2, pp. 173-184.
334.
334. Touratier, M., and Faye, J. P., 1995, “On a Refined Model in Structural Mechanics: Finite Element Approximation and Edge Effect Analysis for Axisymmetric Shells,”Computers and Structures, Vol. 54, No. 5, pp. 897-920.
335.
335. Shimpi, R. P., and Ghugal, Y. M., 2000, “A Layerwise Shear Deformation Theory for Two Layered Cross-Ply Laminated Plates,”Mechanics of Composite Materials and Structures, Vol. 7, No.4, pp. 331-353.
336.
336. Srinivas, S., 1973, “A Refined Analysis of Composite Laminates,”Journal of Sound and Vibration, Vol. 30, No. 4, pp. 495-507.
337.
337. Seide, P., 1980, “An Improved Approximate Theory for the Bending of Laminated Plates,”Mechanics Today, Vol. 5, pp. 451-466.
338.
338. Toledano, A., and Murakami, H., 1987, “A Composite Plate Theory for Arbitrary Laminate Configuration,”ASME Journal of Applied Mechanics, Vol. 54, pp. 181-189.
339.
339. Cho, K. N., Bert, C. W., and Striz, A. G., 1991, “Free Vibrations of Laminated Rectangular Plates Analysed by Higher Order Individual-Layer Theory,”Journal of Sound and Vibration, Vol. 145, No. 3, pp. 429-442.
340.
340. Lee, C. Y., and Liu, D., 1992, “An Interlaminar Stress Continuity Theory for Laminated Composite Analysis,”Computers and Structures, Vol. 42, No. 1, pp. 69-78.
341.
341. Reddy, J. N., 1987, “A Generalization of Two-Dimensional Theories of Laminated Composite Plates,”Communications in Applied Numerical Methods, Vol. 3, pp. 173-180.
342.
342. Reddy, J. N., Barbero, E. J., and Teply, J. L., 1989, “A Plate Bending Element Based on a Generalized Laminate Theory,”International Journal of Numerical Methods in Engineering, Vol. 28, pp. 2275-2292.
343.
343. Barbero, E. J., Reddy, J. N., and Teply, J., 1990, “An Accurate Determination of Stresses in Thick Laminates Using a Generalised Plate Theory,”International Journal for Numerical Methods in Engineering, Vol. 29, pp. 1-14.
344.
344. Robbins, D. H., and Reddy, J. N., 1993, “Modeling of Thick Composites Using Layerwise Laminate Theory,”International Journal for Numerical Methods in Engineering, Vol. 36, pp. 655-677.
345.
345. Zhu, C. and Lam, Y. C., 1998, “A Rayleigh-Ritz Solution for Local Stresses in Composite Laminates,”Composite Science and Technology, Vol. 58, No. 3-4, pp. 447-461.
346.
346. Soldatos, K. P., 1992, “A General Laminated Plate Theory Accounting for Continuity of Displacements and Transverse Shear Stresses at Material Interfaces,”Composite Structures, Vol. 20, pp. 195-211.
347.
347. Gaudenzi, P., 1992, “A General Formulation of Higher Order Theories for the Analysis of Laminated Plates,”Composite Structures, Vol. 20, pp. 103-112.
348.
348. Gaudenzi, P., Barboni, R., and Mannini, A., 1995, “A Finite Element Evaluation of Single-Layer and Multi-layer Theories for the Analysis of Laminated Plates,”Composite Structures, Vol. 30, No. 4, pp. 427-440.
349.
349. Negishi, Y., and Hirashima, K. I., 1997, “General Higher-Order Theory for Laminated Composite Structures with Interlayer Slip,”JSME International Journal, Series A, Vol. 40, No. 1, pp. 75-83.
350.
350. Mau, S. T., 1973, “A Refined Laminated Plate Theory,”ASME Journal of Applied Mechanics, Vol. 40, pp. 606-607.
351.
351. Chou, P. C., and Carleone, J., 1973, “Transverse Shear in Laminated Plate Theories,”AIAA Journal, Technical Note, Vol. 30, No. 9, pp. 1333-1336.
352.
352. Durocher, L. L., and Solecki, R., 1975, “Bending and Vibration of Transversely Isotropic Two-Layer Plates,”AIAA Journal, Technical Note, Vol. 13, No. 11, pp. 1522-1524.
353.
353. Di Sciuva, M., 1984, “A Refinement of the Transverse Shear Deformation Theory for Multilayered Orthotropic Plates,”l’Aerotecnica Missili E Spazio, Vol. 63, No. 2, pp. 84-92.
354.
354. Di Sciuva, M., 1986, “Bending, Vibration and Buckling of Simply Supported Thick Multilayered Orthotropic Plates: An Evaluation of a New Displacement Model,”Journal of Sound and Vibration, Vol. 105, pp.425-442.
355.
355. Murakami, H., 1986, “Laminated Composite Theory With Improved In-Plane Responses,”ASME Journal of Applied Mechanics, Vol. 53, pp. 661-666.
356.
356. He, J. F., Chou, M., and Zhang, X., 1993, “Bending Analysis of Laminated Plates Using a Refined Shear-Deformation Theory,”Composite Structures, Vol. 24, pp. 125-138.
357.
357. Schmidt, R., and Librescu, L., 1994, “Further Results Concerning the Refined Theory of Anisotropic Laminated Composite Plates,”Journal of Engineering Mathematics, Vol. 28, No. 5, pp. 407-425.
358.
358. Bisegna, P., and Sacco, E., 1997a, “A Layerwise Laminate Theory Rationally Deduced from the Three-Dimensional Elasticity,”ASME Journal of Applied Mechanics, Vol. 64, No. 3, pp. 538-545.
359.
359. Toledano, A., and Murakami, H., 1987, “A Higher-Order Laminated Plate Theory with Improved In-Plane Responses,”International Journal of Solids and Structures, Vol. 23, No. 1, pp. 111-131.
360.
360. Di Sciuva, M., 1987, “An Improved Shear-deformation Theory for Moderately Thick Multilayered Anisotropic Shells and Plates,”ASME Journal of Applied Mechanics, Vol. 54, No. 3, pp. 589-596.
361.
361. Di Sciuva, M., 1992, “Multilayered Anisotropic Plate Models with Continuous Interlaminar Stresses,”Composite Structures, Vol. 22, No. 3, pp. 149-167.
362.
362. Di Sciuva, M., and Icardi, U., 1993, “Numerical Studies on Bending, Free Vibration and Buckling of Multilayered Anisotropic Plates,”Aerotecnica Missili E Spazio, Vol. 72, No. 1-2, pp. 21-37.
363.
363. Bhaskar, K., and Vardan, T. K., 1989, “Refinement of Higher Order Laminated Plate Theories,”AIAA Journal, Technical Note, Vol. 27, No. 12, pp. 1830-1831.
364.
364. Savithri, S., and Varadan, T. K., 1990, “Accurate Bending Analysis of Laminated Orthotropic Plates,”AIAA Journal, Technical Note, Vol. 28, No. 10, pp. 1843-1844.
365.
365. Savithri, S., and Varadan, T. K., 1991, “Bending Analysis of Angle-Ply Laminates,”Journal of Aeronautical Society of India, Vol. 43, No. 2, pp. 119-123.
366.
366. Savithri, S., and Varadan, T. K., 1992, “On Various Refined Theories in the Bending Analysis of Angle-Ply Laminates,”Journal of Aeronautical Society of India, Vol. 44, No. 2, pp. 145-151.
367.
367. Reddy, K. J., Nagaraja, K. S., and Vijayakumar, K., 1991, “New Approach for Analysis of Flexure of Symmetric Laminates,”AIAA Journal, Vol. 29, No. 11, pp. 1960-1966.
368.
368. Cho, M., and Parmerter, R. R., 1992, “An Efficient Higher Order Plate Theory for Laminated Composites,”Composite Structures, Vol. 20, pp. 113-123.
369.
369. Cho, M., and Parmerter, R. R., 1993, “Efficient Higher Order Composite Plate Theory for General Lamination Configurations,”AIAA Journal, Vol. 31, pp. 1299-1306.
370.
370. Cho, M., and Kim, J. S., 1996, “Four-Noded Finite Element Post-process Method using a Displacement Field of Higher-Order Laminated Composite Plate Theory,”Computers and Structures, Vol. 61, No. 2, pp. 283-290.
371.
371. Liu, P., Zhang, Y., and Zhang, K., 1994, “Bending Solution of High-Order Refined Shear Deformation Theory for Rectangular Composite Plates,”International Journal of Solids and Structures, Vol. 31, No. 18, pp. 2491-2507.
372.
372. Icardi, U., 1998, “Eight-noded Zig-zag Element for Deflection and Stress Analysis of Plates with General Lay-up,”Composites Part B, Vol. 29B, pp. 425-441.
373.
373. Lee, K. H., Senthilnathan, N. R., Lim, S. P., and Chow, S. T., 1990, “An Improved Zig-Zag Model for the Bending of Laminated Composite Plates,”Composite Structures, Vol. 15, pp. 137-148.
374.
374. Lee, K. H., Lin, W. Z., and Chow, S. T., 1994, “Bidirectional Bending of Laminated Composite Plates Using an Improved Zig-Zag Model,”Composite Structures, Vol. 28, pp. 283-294.
375.
375. Lee, K. H., and Cao, L., 1996, “A Predictor-Corrector Zig-Zag Model for the Bending of Laminated Composite Plates,”International Journal of Solids and Structures, Vol. 33, No. 6, pp. 879-897.
376.
376. He, J. F., and Zhang, S. W., 1997, “Antisymmetric Bending Analysis of Symmetric Laminated Plates Including Transverse Shear and Normal Effects,”Composite Structures, Vol. 37, No. 3-4, pp. 393-417.
377.
377. He, J. F., and Zhang, S. W., 1999, “Symmetric Deformation Analysis of Symmetric Laminated Plates Including Transverse Shear and Normal Effects,”Composite Structures, Vol. 45, No. 3, pp. 205-226.
378.
378. Moazzami, M., and Sandhu, P. S., 1993, “A Higher Order Discrete Theory for Laminated Plates,”Composite Structures, Vol. 23, pp. 205-220.
379.
379. Wu, C. P., and Kuo, H. C., 1992, “Interlaminar Stress Analysis for Laminated Composite Plates Based on a Local Higher Order Lamination Theory,”Composite Structures, Vol. 20, pp. 237-247.
380.
380. Wu, C. P., and Hsu, C. S., 1993, “A New Local Higher Order Laminate Theory,”Composite Structures, Vol. 25, pp. 439-448.
381.
[Soviet Applied Mechanics, Vol. 22, No. 7, pp. 655-660, 1987.]
382.
382. Karama, M., Harb, B. A., Mistou, S., and Caperaa, S., 1998, “Bending, Buckling and Free Vibration of Laminated Composite with a Transverse Shear Stress Continuity Model,”Composites, Part B, Vol. 29B, No. 3, pp. 223-234.
383.
383. Biot, M. A., 1972, “A New Approach to the Mechanics of Orthotropic Multilayered Plates,”International Journal of Solids and Structures, Vol. 8, No. 4, pp. 475-490.
384.
[Soviet Applied Mechanics, Vol. 14, No. 10, pp. 1021-1034, 1979.]
385.
[Soviet Applied Mechanics, Vol. 21, No. 4, pp. 405-412, 1985.]
388. Srinivas, S., Rao, A. K., and Joga Rao, C. V., 1969, “Flexure of Simply Supported Thick Homogeneous and Laminated Rectangular Plates,”ZAMM: Zeitschrift fur Angewandte Mathematik und Mechanik, Band 49, Heft 8, Seite 449-458.
389.
389. Srinivas, S., Joga Rao, C. V., and Rao, A. K., 1970, “An Exact Analysis for Vibration of Simply-Supported Homogeneous and Laminated Thick Rectangular Plates,”Journal of Sound and Vibration, Vol. 12, No. 2, pp. 187-199.
390.
390. Hsu, Y. C., 1971, “A Uniformly Loaded Infinite-length Thin Plate Bent to a Cylindrical Surface in the Presence of Couple-stresses,”Journal of the Franklin Institute, Vol. 29, No. 4, pp. 255-270.
391.
391. Little, R. W., 1973, Elasticity, Prentice-Hall, Englewood Cliffs, N.J., pp. 109-112.
392.
392. Levinson, M., 1985, “The Simply Supported Rectangular Plate: An Exact, Three-Dimensional, Linear Elasticity Solution,”Journal of Elasticity, Vol. 15, No. 3, pp. 283-291.
393.
393. Levinson, M., 1985, “Free Vibration of a Simply Supported, Rectangular Plate: An Exact Elasticity Solution,”Journal of Sound and Vinration, Vol. 98, No. 2, pp. 289-298.
394.
394. Srinivas, S., and Rao, A. K., 1970, “Bending, Vibration and Buckling of Simply Supported Thick Orthotropic Rectangular Plates and Laminates,”International Journal of Solids and Structures, Vol. 6, pp. 1463-1481.
395.
395. Srinivas, S., and Rao, A. K., 1971, “A Three-Dimensional Solution for Plates and Laminates,”Journal of the Franklin Institute, Vol. 291, No. 6, pp. 469-481.
396.
396. Wittrick, W. H., 1987, “Analytical Three-Dimensional Elastcity Solutions to some Problems and some observations on Mindlin’s Plate Theory,”International Journal of Solids and Structures, Vol. 23, No. 4, pp. 441-464.
397.
397. Hussainy, S. A., and Srinivas, S., 1975, “Flexure of Rectangular Composite Plates, Fibre Science and Technology, Vol. 8, pp. 59-76.
398.
398. Pagano, N. J., and Wang, A. S. D., 1971, “Further Study of Composite Laminates Under Cylindrical Bending,”Journal of Composite Materials, Vol. 5, pp. 521-528.
399.
399. Pagano, N. J., and Hatfield, S. J., 1972, “Elastic Behavior of Multilayered Bidirectional Composites,”AIAA Journal, Vol. 10, No. 7, pp. 931-933.
400.
400. Kulkarni, S. V., and Pagano, N. J., 1972, “Dynamic Characteristics of Composite Laminates,”Journal of Sound and Vibration, Vol. 23, pp. 127-143.
401.
401. Piskunov, V. G., Sipetov, V. S., and Tuimetov, 1990, “Solution of a Static Problem for Laminated Orthotropic Plates in a Three-Dimensional Formulation,”Soviet Applied Mechanics, Vol. 26, No. 2, pp. 142-148.
402.
402. Kaprielian, P. V., Rogers, T. G., and Spencer, A. J. M., 1988, “Theory of Laminated Elastic Plates. I, Isotropic Laminae,”Philosophical Transactions of the Royal Society of London, Series A, Vol. 324, No. 1582, pp. 565-594.
403.
403. Fan, J., and Ye, J., 1990, “An Exact Solution for the Statics and Dynamics of Laminated Thick Plates with Orthotropic Layers,”International Journal of Solids and Structures, Vol. 26, No. 5-6, pp. 655-662.
404.
404. Fan, J., and Ye, J., 1990, “A Series Solution of the Exact Equation for Thick Orthotropic Plates,”International Journal of Solids and Structures, Vol.26, No. 7, pp. 773-778.
405.
405. Noor, A. K., Burton, W. S., 1990, “Three Dimensional Solutions for Antisymmetrically Laminated Anisotropic Plates,”Trans. ASME, Journal of Applied Mechanics, Vol. 57, No. 1, pp. 182-188.
406.
406. Pan, E., 1991, “An Exact Solution for Transversely Isotropic, Simply Supported and Layered Rectangular Plates,”Journal of Elasticity, Vol. 25, No. 2, pp. 101-116.
407.
407. Savoia, M., and Reddy, J. N., 1992, “A Variational Approach to Three-Dimensional Elasticity Solutions of Laminated Composite Plates,”ASME Journal of Applied Mechanics, Vol. 59, No. 2, Part 2, pp. S166-S175.
408.
408. Wu, Z. J., and Wardenier, J., 1998, “Further Investigation on the Exact Elasticity Solution for Anisotropic Thick Rectangular Plates,”International Journal of Solids and Structures, Vol. 35, No. 7-8, pp. 747-758.
409.
409. Barker, R. M., Lin, F. T., and Dana, J. R., 1972, “Three Dimensional Finite Element Analysis of Laminated Composites,”Computers and Structures, Vol. 2, pp. 1013-1029.
410.
410. Wanthal, S. P., and Yang, H. T. Y., 1991, “Three-Dimensional Finite Element Formulation for Laminated Plates,”Journal of Reinforced Plastics and Composites, Vol. 10, No. 4, pp. 330-353.
411.
411. Kong, J., and Cheung, Y. K., 1995, “Three-Dimensional Finite Element Analysis of Thick Laminated Plates,”Computers and Structures, Vol. 57, No. 6, pp. 1051-1062.
412.
412. Miravete, A., and Duenas, E., 1989, “A simple Finite Element Formulation for 3D Laminated Composite Plates,”Proceedings of the 5th International Conference on Composite Structures, Edited by Marshall, I. H., Scotland, Elsvier Applied Scince, London, pp. 405-417.
