Sage Journals: Discover world-class research

Abstract

A study on the effect of moisture absorption characteristics of RT-cure glass/epoxy composite and epoxy casting specimens immersed in freshly prepared artificial seawater and distilled water maintained at 333º K are presented in this paper. Results showed that the equilibrium moisture absorption value and the diffusion rate (slope of the moisture absorption curve) are higher in specimens immersed in distilled water than those of artificial seawater. The mixture rule for moisture absorption estimates has been verified for specimens immersed in both environments. These theoretically calculated values compared well with those experimentally obtained. The time of saturation for specimens immersed in seawater was found to be higher than that for those immersed in distilled water.

Keywords

glass/epoxy composite casting distilled water seawater moisture gain diffusion coefficient

Get full access to this article

View all access options for this article.

References

1. Menges, G. and H. W. Gitshner . 1980. “Sorption Behaviour of Glass-Fibre Reinforced Composites and the Influence of Diffusing Media on Deformation and Failure Behaviour,” Proceedings of the Third International Conference on Composite Materials, ICCM-3, Paris, p. 597.

2. Tucker, W. C. and R. Brown . 1989. “Moisture Absorption of Graphite/Epoxy Polymer Composites Under 2000 Feet of Seawater.” J. of Composite Materials, Vol. 23, p. 787.

3. Grant, T. S. and W. L. Bradley . 1995. “Insitu Observations in SEM of Degradation of Graphite/Epoxy Composite Materials Due to Seawater Immersion,” J. of Composite Materials, Vol. 29, No. 7, p. 852.

4. Springer, G. S. “Environmental Effects on Composite Materials,” Vol. 2, pp. 151-161.

5. Springer, G. S. “Environmental Effects on Composite Materials,” Vol. 3, G. S. Springer , ed., Lancaster, PA: Technomic Publishing Company, Inc., pp. 1-34.

6. Singh, K. S. , P. N. Singh and R. M. V. G. K. Rao . 1991. J. of Reinforced Plastics and Composites, Vol. 10, No. 9, pp. 446-456.

7. Almeida, J. R. M. 1991. “Effects of Distilled Water and Saline Solution on the Interlaminar Shear Strength of an Aramid/Epoxy Composite.” J. of Composite Materials, Vol. 22, No. 6, p. 448.

8. Loos, A. C. and G. S. Springer . 1979. “Moisture Absorption of Graphite/Epoxy Composites in Liquids and in Humid Air,” J. of Composite Materials, Vol. 13, April, p. 131.

Hygrothermal Effects on RT-Cured Glass-Epoxy Composites in Immersion Environments. Part A: Moisture Absorption Characteristics

Abstract

Keywords

Get full access to this article

References