Liquid composite molding processes have the potential to produce complex shaped parts utilizing tailored fiber reinforcements and inserts. Existing simulation tools have the capability to predict the flow front advancement as the resin impregnates the fiber preform to saturate it, thus minimizing cost intensive trial and error approaches to successful mold filling. An important input to such simulations is the permeability of fiber preforms, which describes its resistance to flow. Permeability is a function of the fiber architecture and fiber volume fraction. Traditional experimental methods to measure permeability allow one to obtain a single value at a prefixed fiber volume fraction; hence, if one wants to obtain permeability over a wide range of fiber volume fractions, a multitude of experiments are necessary. This paper introduces a novel approach to determine permeability over a wide range of fiber volume fractions in one continuous experiment using the same preform. Repeatable results for woven glass fabrics over a range of fiber volume fraction are presented.
Get full access to this article
View all access options for this article.
References
1.
1. S. G. Advani, Editor. Flow and Rheology in Polymeric Composites Manufacturing, Elsevier Publishers, Amsterdam, 1994.
2.
2. P. Simácek, E. M. Sozer, and S. G. Advani. User Manual for DRAPE 1.1 and LIMS 4.0 (Liquid Injection Molding Simulation). Technical Report Center for Composite materials 98-01, Delaware, 1998.
3.
3. M. V. Bruschke, T. L. Luce, and S. G. Advani. Effective In-Plane Permeability of Multi-Layered RTM Preforms. Proceedings of the American Society for Composites Proceedings of the 7th Technical Conference of the American Society for Composites, Oct 13-15, pp. 103-112, 1992.
4.
4. P. Simacek, E. M. Sozer, and S. G. Advani. Numerical Simulations of Mold Filling for Design and Control of RTM. Proceedings of the 1998 56th Annual Technical Conference, ANTEC. Part 2 (of 3) Apr. 26-30, 1998, v. 2, pp. 2327-2335, Atlanta, GA, USA, 1998.
5.
5. F. R. Phelan, Y. Leung, and R. S. Parnas. Modeling of Microscale Flow in Unidirectional Fibrous Porous Media. Journal of Thermoplastic Composite Materials, 7(3):208-218, 1994.
6.
6. R. S. Parnas, J. G. Howard, T. L. Luce, and S. G. Advani. Permeability Characterization. Part 1: A Proposed Standard Reference Fabric for Permeability. Polymer Composites, 16(6):429-445, 1995.
7.
7. J. Slade, E. M. Sozer and S. G. Advani. Fluid Impregnation of Deformed Preforms. Journal of Reinforced Plastics and Composites, 19(7):552-568, 2000.
8.
8. T. A. K. Sadiq, S. G. Advani, and R. S. Parnas. Experimental Investigation of Transverse Flow through Aligned Cylinders. International Journal of Multiphase Flow, 21(5):755-774, 1995.
9.
9. S. G. Advani, and S. Ranganathan. Chapter 2: Fiber-Fiber and Fiber-Wall Interactions During the Flow of Non-Dilute Suspensions, pp. 43-76 in Flow Induced Alignment in Composite Materials, Edited by D. C. Guell and T. D. Papathanasiou, Woodhead Publishing Ltd., Cambridge, England, 1977.
10.
10. R. S. Parnas, A. J. Salem, T. A. K. Sadiq, H-P. Wang, and S. G. Advani. Interaction Between Micro- and Macro-Scopic Flow in RTM Preforms. Composite Structures, 27(1-2):93-107, 1994.
11.
11. Y. DeParseval, K. M. Pillai, and S. G. Advani. Simple Model for the Variation of Permeability due to Partial Saturation in Dual Scale Porous Media. Transport in Porous Media, 27(3):243-264, 1997.
12.
12. K. M. Pillai, and S. G. Advani. Model for Unsaturated Flow in Woven Fiber Preforms During Mold Filling in Resin Transfer Molding. Journal of Composite Materials, 32(19):1753-1783, 1998.
13.
13. C. Lekakou, M. A. K. B. Johari, and M. G. Bader. Compressibility and Flow Permeability of Two-Dimensional Woven Reinforcements in the Processing of Composites. Polymer Composites, 17(5):666-672, 1996.
14.
14. Y-H. Lai, B. Khomami, and J. L. Kardos. Accurate Permeability Characterization of Preforms Use in Polymer Matrix Composite Fabrication Processes. Polymer Composites, 18(3):368-377, 1997.
15.
15. Y. de Parseval. Experimental and Analytical Methods for the Characterization of the Permeability of Fiber Preforms. Master’s thesis, University of Delaware, 1995.
16.
16. R. Gauvin, F. Trochu, Y. Lemenn, and L. Diallo. Permeability Measurement and Flow Simulation Through Fiber Reinforcement. Polymer Composites, 17(1):34-42, 1996.
17.
17. T. L. Luce, S. G. Advani, J. G. Howard, and R. S. Parnas. Permeability Characterization. Part 2: Flow Behavior in Multiple-Layer Preforms. Polymer Composites, 16(6):446-458, 1995.
18.
18. S. H. Ahn, W. I. Lee, and G. S. Springer. Measurement of the Three-Dimensional Permeability of Fiber Preforms Using Embedded Fiber Optic Sensors. Journal of Composite Materials, 29(6):714-733, 1995.
19.
19. W. O. Ballata, S. M. Walsh, and S. G. Advani. Determination of the Transverse Permeability of a Fiber Preform. Proceedings of American Society for Composites 13th Annual Technical Conference, 1998.
20.
20. P. B. Nedanov, S. G. Advani, S. W. Walsh, and W. O. Ballata. Determination of the Permeability Tensor of Fibrous Reinforcements for VARTM. Proceedings of ASME International Mechanical Engineering Congress, 58:79-88, 1999.
21.
21. A. W. Chan and S. T. Hwang. Anisotropic In-Plane Permeability of Fabric Media. Polymer Engineering and Science, 31(16):1233-1239, 1991.
22.
22. C. A. Berny. Permeability of Woven Reinforcements for Resin Transfer Molding. Master’s thesis, University of Illinois at Urbana Campaign, 1993.
23.
23. R. V. Mohan, S. Bickerton, D. R. Shires, S. G. Advani, and K. K. Tamma. Analysis and Characterization of Flow Channels During Manufacturing of Composites by Resin Transfer Molding. Conference Proceedings Materials Proceedings of the 1997 55th Annual Technical Conference, ANTEC. Part 2 (of 3) Apr. 27-May 2 1997, 2:2388-2400, 1997.
24.
24. S. Bickerton, S. G. Advani, R. V. Mohan, and D. R. Shires. Experimental Analysis and Numerical Modeling of Flow Channel Effects in Resin Transfer Molding. Polymer Composites, 21(1):134-153, 2000.
25.
25. K. Han, B. Lee, and B. Rice. Permeability Measurements of Fiber Preforms and Applications. Proceedings of the 1998 ASME International Mechanical Engineering Congress and ExpositionNov. 15-20, 1998, v. 84, p. 275, 1998.
26.
26. J. Chaneske, K. Jayaraman, D. Norman, and R. Robertson. Effects of Preform Architecture on Racetracking in Liquid Molding. Proceedings of the 45th International SAMPE Symposium and ExhibitionMay 21-May 25, 2000, v. 45 (I) 2000 Long Beach, CA, USA, pp. 954-966, 2000.
27.
27. S. P. Owusu-Ofori, D. M. Pai, and R. L. Sadler. Prediction of Racetracking in Resin Transfer Molding. Proceedings of the 1997 ASME International Mechanical Engineering Congress and Exposition. 79:351-360, 1997.
28.
28. A. W. Chan and R. J. Morgan. Modeling Racetracking Effects in Liquid Composite Molding. Proceedings of the 1997 ASME International Mechanical Engineering Congress and Exposition. 79:361-367, 1997.
29.
29. S. Bickerton and S. G. Advani. Characterization and Modeling of Racetracking in Liquid Composite Molding Processes. Composite Science and Technology, 59(15):2215-2229, 1999.
30.
30. F. Mortensen and O. T. Thomsen. Simple Approach for the Analysis of Embedded Ply Drops in Composite and Sandwich Laminates. Composites Science and Technology, 59(8):1213-1226, 1999.
31.
31. D. S. Cairns, J. F. Mandell, M. E. Scott, and J. Z. Maccagnano. Design and Manufacturing Considerations for Ply Drops in Composite Structures. Composites Part B: Engineering, 30(5):523-534, 1999.
32.
32. J. M. Lawrence and S. G. Advani. The Effect of Ply Drop-Off Regions on Flow Propagation and Processing Parameters during the Resin Transfer Molding Process. Proceedings of the 45th International SAMPE 2000 Symposium and Exhibition. 1576-1584, 2000.
33.
33. S. Bickerton. Modeling and Control of Flow during Impregnation of Heterogeneous Porous Media, With Application to Composite Mold Filling Processes. Dissertation, University of Delaware, 1998.
