Effect of Weaving on the Tensile Properties of Carbon Fibre Tows and Woven Composites

Abstract

Tension tests were conducted on (consolidated) tow and woven carbon/epoxy composites in an attempt to quantify the effect of fibre damage induced during weaving on the mechanical performance of fibre tows and their corresponding composites. Two commercially-available carbon fibres were considered. The tension tests were carried out on composites with fibre tows sampled from different locations in the loom setup. These included samples from the tensioning, heddles and reed regions of loom setup. In addition, samples were taken from the external (or, surface) and internal warp layers of the woven preforms. The present work has shown that the tensile properties of fibre composites are detrimentally affected only if the fibres suffer sufficiently large amounts of damage during the weaving process. Compared with unidirectional, non-woven fibre tow composites, further deterioration in properties is expected in multilayer woven composites due to the inevitable presence of fibre crimping.

Keywords

fibre damage fibre crimp weaving tensile properties

Get full access to this article

View all access options for this article.

References

1. Agarwal, B. D. and Broutman, L. J. , “Analysis and Performance of Fibre Composites,” 2nd Ed. John Wiley & Sons, Inc. (1990).

2. Cox, B. N. , Dadkhah, M. S. , Morris, W. L. and Flintoff, J. G. , “Failure mechanisms of 3D woven composites in tension, compression, and bending,” Acta Metall. Mater., 42 (12), 3967 (1994).

3. Cox, B. N. and Flanagan, G. , “Handbook of Analytical Methods for Textile Composites,” Rockwell Science Center (1996).

4. Falzon, P. J. and Herszberg, I. , “Mechanical performance of 2-D braided carbon/epoxy composites,” Comp. Sci. Tech., 58 (2), 253 (1996).

5. Chou, S. and Wu, C-J. (1992) “A study of the physical properties of epoxy resin composites reinforced with knitted class fibre fabrics,” J. Rein. Plas. Comp., 11, 1239, November (1992).

6. Leong, K. H. , Lee, B. , Herszberg, I. and Bannister, M. K. , “The effect of binder path on the tensile properties and failure of multilayer woven CFRP composites,” Comp. Sci. Tech., Vol. 60, No. 1 (2000) p. 149.

7. ASTM D4018-81, “Standard Test Method for Tensile Properties of Continuous Filament Carbon and Graphite Yarns, Strands, Rovings and Tows,” (1981).

8. SACMA SRM 16R-94, “Suppliers of Advanced Comoosite Materials Association (SACMA) Test Method for Tow Tensile Testing of Carbon Fibres,” (1994).

9. Callus, P.J. , Mouritz, A.P. , Bannister, M.K. and Leong K.H. , “Tensile properties and failure mechanisms of 3D woven GRP composites,” Comp. A, 30 (11), 1277 (1999).

10.

10. Hexcel Composites, “RTM 6 Product Data,” Publication ITA065a (1998).

11.

11. Hull, D. , “Introduction to Composite Materials,” Cambridge University Press, Cambridge, England (1981).