Mechanical Behavior and Fabrication Characteristics of Aluminum Metal Matrix Composite Alloys

1. H.W.L. Philips , “Annotated Equilibrium Diagram of Some Aluminum Alloy Systems,” Institute of Metals, ASM, p. 6-6, 1993.

2. L.F. Mondolofo , Aluminum Alloys, Structure and Properties, Butterworth, London, p. 283-283, 1976.

3. T.J. Logan and J.R. Pickens , Aluminum Lithium Alloys, Vol. 2, Engineering Publications, p. 691-691, 1989.

4. W.A.Pollack , Report on Plant Installation of Aluminum Condenser Tubes, Proc. Am. Power Conference, XIX, p. 730-730, 1957.

5. E.V.Constantinova , S.I.Specter , L.S. Semonova and B.I. Kursonova , “The Investigation of the Possibility of Aluminum and its Alloys Application as Materials of Construction,” International Symposium on Fresh Water from Sea, Vol. I, p. 591-591, 1970.

6. Watanabe et al., “Research and Development of Heat Transfer Tube for MSF,” Corrosion Engineer, Vol. 25, No. 5, p. 323-323, 1976.

7. D.A. Fauth and R.L. Lindberg , “Aluminum Heat Transfer Surfaces Multi-Stage Flash Distillation Plants,” 3rd Int. Conf. on Fresh Water from Sea, Vol. 1, Eds. A. Delyannis and E. Delyannis , Athens, p. 601-601, 1978

8. P. Vankateshvaran and E. Galew, Report GKSS 83/E/48, Geesthacht, Germany, 1993.

9.Aluminum Properties and Physical Metallurgy, Ed. John E. Hatch , ASM, p. 364-364, 1984.

10. F.A.Badia , D.F.MacDonald , and R.J. Pearson , AFS Transactions, 77, pp. 69–85, 1969.

11. S. Kaye , J. Vac. Sci. Tech., 6, pp. 1114–1117, 1974.

12. B.C. Pai and P.K. Rohatgi , J. Mat. Sci., 13, pp. 329–335, 1978.

13. M. Suwa , K. Kimon and K. Sueno , Japan Soc. Lub. Eng., 40, pp. 1074–1080, 1986.

14. F.A. Badia and P.D. Merka , AFS Transactions, 79, p. 347-347, 1971.

15. R.Mehrabian , R. G. Riek , and M.C. Flemings , Met. Transactions, 5, pp. 1899–1905, 1974.

16. F.A. Badia and R.K. Rohatgi , AFS Transactions, 77, pp. 402–406, 1969.

17. P.K. Rohatgi , B.C. Pai and S.C. Pande , J. Mat. Sc., 14, pp. 2277–2284, 1979,

18. B.C.Pai , R. Sabial , K.V.Prabhakar , and P.K. Rohatgi , Mat. Sci. & Eng., 24, pp. 31–49, 1976.

19. R.T.Deonath , P.K.Shat , and J. Rohatgi , J. Mat. Sc., p. 1241-1241, 1980.

20. A. Sato and R. Mehrabian , Metall. Transactions, 7, 13, p. 443-443, 1976.

21. M.W. Tuaz , “Squeeze Cast Composites,” Proc. of AFS’s International Conference on Permanent Metal Casting of Aluminum, American Foundrymen’s Society, Detroit, MI, 1989.

22. H. Fukunaga , “Squeeze Casting Process for Fiber Reinforced Metals and Their Mechanical Properties—Cast Reinforced Metal Composites,” Ed. S.G. Fishman and A.K. Dhingra , ASM International, 1988.

23. M.E. Buck and R.J. Suplinskas , “Continuous Boron Fiber MMCs,” Engineering Materials Handbook, Vol. I, ASM International, p. 851-851, 1987.

24. T.C. Willis , “Deposition Process for Metal Matrix Composite Manufacture,” Met. Mater., p. 485-485, Aug. 1988.

25. A.L. Greger and J.A. Wacks , JOM, A3, 8, p. 815-815, Aug. 1991.

26. Lord Rayleigh , “On the Influence of Obstacles Arranged in Rectangular Order Upon the Properties of a Medium,” Phil. Mag., 34, p. 481-481, 1892.

27. D.A.G. Bruggeman , “Dielectric Constant and Conductivity of Mixture of Isotropic Material,” Ann. Alan Physik, 241, p. 636-636, 1935.

28. H. Fricks , “The Electrical Conductivity of a Suspension of Homogeneous Particles,” Phys. Rev., 24, p. 575-575, 1924.

29. P.S. Turner , “Thermal Expansion Stresses in Reinforced Plastics,” J. Res. NBS, 37, p. 239-239, 1946.

30. D.K. Hale , “The Physical Properties of Composite Materials,” J. Mat. Sc., 11, p. 105-105, 1976.

31. J.C. Halpin , “Stiffness and Expansion Estimates for Oriented Short Fiber Composites,” J. Comp. Mat., 3, p. 732-732, 1967.

32. D.J. Lloyd , “Particle Reinforced Al Metal Matrix Composites,” Int. Metal Review, 39, 1, p.1-1, 1994.

33. C. Kim , L. Lee , and M. Plichta , “Plastic Relaxation of Thermoelastic Stress in Aluminum/Ceramic Composites,” Met. Trans., A21A, p. 411-411, 1990.

34. M. Taya , K. Lulay and D. Lloyd , Acta Met., 39, 1, p. 73-73, 1991.

35. T. McNelky , B. Edwards , and O. Shereby , “A Microstructural Co-relation between the Mechanical Behavior of Large Volume Fraction Particulate Composites at Low and High Temperatures,” Acta Met., 25, p. 117-117, 1977.

36. T. Christman , A. Needleman , and S. Suresh , Acta Metal., 37, p. 3029-3029, 1989.

37. A. Levy and J.M. Papazian , in “Metal Matrix Composites, Processing, Microstructure, and Properties,” 12th Rise Int. Symp. on Metallurgy and Materials Science, Rise National Laboratory, Roskilde, Denmark, 1991 (Ed. N. Hansen et al.), pp. 475–482.

38. M.Taya, K.E. Lulay and D.J. Lloyd , Acta Metal., 37, p. 3061-3061, 1989.

39. M. Taya , K. E. Lulay and D.J. Lloyd , in Morris E. Fine Symp. (Ed. P.K. Liaw et al.), Warrendale, Pa, The Metallurgical Society of A.I.M.E., pp. 153–164, 1992.

40. D. Davidson , “Tensile Deformation and Fracture Toughness of 2014 + 15% Pet SiC Particulate Composites,” Met. Trans., A22A, p. 113-113, Jan. 1991.

41. J. Ekrall , J. Rhodes , and B. Wald , “Methodology for Evaluating Weight Savings from Basic Materials Properties in Design of Fatigue and Fracture Resistance,” Structures, STP, 761, p. 328-328, 1982.

42. D.R. Paschal , “Application of Metal Matrix Composites in Military Aircraft,” Technical Paper No. EM 88-5591 (Dearborn, MI Society for Manufacturing Engineers), 1988.