Fatigue Lives of Short Fiber Reinforced Thermoplastics Parts

Abstract

The fatigue lives of two different parts (made of short glass fiber reinforced Copolyamide) were investigated. The first one was a 150 mm by 10 mm by 4 mm coupon with a 2 mm hole at the center. The second one was an automotive gear shift link. The fiber orientations and the stresses inside these parts were calculated, respectively, by the commercial softwares C-Mold and by ABAQUS. The fatigue lives under different cyclic loads were measured; they were also estimated by a model based on the Generalized Miner’s Rule, the results of C-Mold and ABAQUS, and the S-N data generated as part of this study [1,2]. Comparisons between the measured and estimated (by the model) fatigue lives are in reasonable agreement, indicating that the procedure employed is a useful tool for estimating the fatigue lives of parts made of short fiber reinforced thermoplastics.

Get full access to this article

View all access options for this article.

References

1. A. Zago and G.S. Springer , “Constant Amplitude Fatigue of Short Glass and Carbon Fiber Reinforced Thermoplastics,” Journal of Reinforced Plastics and Composites, 20(7):564-595.

2. A. Zago , G.S. Springer and M. Quaresimin , “Cumulative Damage of Short Glass Fiber Reinforced Thermoplastics,” Journal of Reinforced Plastics and Composites, 20(7):596-610.

3. M. Gupta and K.K. Wang , “Fiber Orientation and Mechanical Properties of Short-Fiber-Reinforced Injection-Molded Composites: Simulated and Experimental Results,” Polymer Composites, vol. 14, pp. 367-382, 1983.

4. Y.C. Fung , A First Course in Continuum Mechanics, Prentice-Hall, 1977.

5. J.M. Whitney and R.J. Nuismer , “Stress Fracture Criteria for Laminated Composites Containing Stress Concentrations,” Journal of Composite Materials, vol. 8, pp. 253-265, 1974.