Time-related Contact Angle Measurements with Human Plasma on Biomaterial Surfaces

Abstract

Axisymmetric drop shape analysis by profile (ADSA-P) was used to assess in time contact angle changes of human plasma drops placed on four different biomaterials. Results were related with conventional blood compatibility measurements: albumin adsorption, fibrinogen adsorption and platelet adhesion. While contact angle measurements with water are material-related but constant in time, contact angle measurements with plasma changed over time owing to protein adsorption on the solid-liquid interface. The contact medium plasma did not influence the initial contact angle. Contact angles on PDMS decreased most in time (41 degrees) and demonstrated highest levels of conventionally measured albumin and fibrinogen adsorption and platelet adhesion. PTFE, with the lowest contact angle decrease over a 500 minutes period (19 degrees), showed low fibrinogen and albumin adsorption as well as low platelet adhesion. PU and HDPE demonstrated almost similar initial contact angles with plasma and contact angle decreases (26 and 27 degrees), intermediate protein adsorption, and platelet adhesion. We conclude that biocompatibility properties of the tested materials may be more related to the behaviour of their contact angles in time, than to the initial hydrophobic or hydrophilic state.

Keywords

Contact angle Protein adsorption Biomaterials Biocompatibility

Get full access to this article

View all access options for this article.

References

Courtney

J.M.

, Forbes

C.D.

Thrombosis on foreign surfaces.

Br Med Bull 1994, 50; 4: 966–81

Lymann

D.J.

, Knutson

, Mc Neil

, Shibatani

The effects of chemical structure and surface properties of synthetic polymers on the coagulation of blood. IV. The relation between polymer morphology and protein adsorption.

Trans Am Soc Artif Intern Organs 1975; 21: 49–54

Casenave

J.P.

Interaction of platelets with surfaces. In: Cazenave

J.P.

, Davies

J.A.

, Kazatchkine

M.D.

, Van Aken

W.G.

eds. Blood-surface Interactions, Biological Principles underlying hemocompatibility with artificial surfaces Elsevier, Amsterdam 1986: 89–105

Gross

D.R.

Thromboembolic phenomena and the use of the pig as an appropriate animal model for research on cardiovascular devices, Int J Artif Organs 1997, 20; 4: 195–203

Zucker

M.B.

, Vroman

Platelet adhesion induced by fibrinogen adsorbed onto glass.

Proc Exp Soc Biol Med 1969; 318–20.

Van der Vegt

Interfacial tensions of adsorbed protein layers, Thesis Groningen 1995, ISBN 90-367-0505-3: 27.

Matsuda

, Ito

Surface coating of hydrophilic-hydrophobic block copolymers on a poly(acrylonitrile) heamodialyser reduces platelet adhesion and its transmembrane stimulation.

Biomaterials 1994; 15: 6: 417–22.

Noordmans

, Busscher

H.J.

The influence of droplet volume and contact angle on liquid surface tension measurements by axisymmetric drop shape analysis-profile (ADSA-P).

Colloid Surfaces 1991; 58: 239–49.

Van der Scheer

, Smolders

C.A.

Dynamic aspects of contact angle measurements on adsorbed protein layers.

J Colloid Interface Sci 1978; 63: 7–15.

10.

Voigt

, Thiel

, Policova

, Zingg

, Neumann

A.W.

Axisymmetric Drop Shape Analysis (ASA) applied to protein solutions.

Colloid Surfaces 1991, 58: 315–26.

11.

International Organization for Standardization. Biological evaluation of medical devices ISO/FDS 10993 (E), Parts 116, 1997, Case postale 56, CH1211 Geneva 20, Switzerland.