The mechanical loading of the leaflets of a polyurethane blood pump valve at closing pressure (max 300 mmHg) and during the opening phase can be numerically calculated by the finite element method. Geometrical and physical non-linearities, supporting forces by neighbouring leaflets and manufacturing-related thickness distribution are taken into account. The valve housing is assumed to be rigid. Volume forces are neglected. The calculations showed that the critical strain limit of 4.5% (long-term failure limit) was exceeded at closing pressure and during valve opening. During valve operation the connection between leaflet and valve housing and the central leaflet region seem to be the critical areas
ReulH., TaguchiK., HeroldM.Comparative evaluation of disk- and tri-leaflet valves in left-ventricular assist devices (LVAD).Int J Artif Organs1988; 11: 127–30.
2.
GogoleswkiS.Implantable segmented polyurethanes: Controversies and uncertainties.Life Supp Syst1987; 5: 41–6.
3.
HeroldM.Implantierbare Herzklappenprothese aus Polyurethanelastomeren, Entwicklung, Fertigung und Test. RWTH Aachen, Dissertation, 1988; 166.
4.
SwansonW.M., ClarkR.E.Dimensions and geometric relationships of the human aortic valve as a function of pressure.Circ Res1974; 35: 871–82.
5.
ReulH., TalukderN.Heart valve mechanics. In: HwangN.H.C., GrossD.R., PatelD.J., eds. Quantitative cardiovascular studies, clinical and research applications of engineering principles.Baltimore: University Park Press1979; 527–64.
6.
MengesG., AdamczakH., NicolayA.Die Berücksichtigung von Verformungsgrenzen an medizinisch eingesetzten Polymeren zur Lebensdauerverlängerung.BMT Fachtagungen MEDEX1976; 21(suppl): 96–7.
7.
MengesG.Das Verhalten von Kunststoffen unter Dehnung.Kunststoffe/German Plastics1973; 63: 2–3.
8.
AdamczakH.Entwicklung, Fertigung und Prüfung von Blutpumpenbauteilen aus Elastomeren.RWTH Aachen, Dissertation, 1976; 222.
9.
UmezuM., YoshiharaT., TakanoH., TsuchiyaK., AkutsuT.Effects of artificial heart drive conditions on water hammer phenomenon.1st symposium of fluid control of the society of instrument and control engineers, Japan 1986; 163–8.
10.
Abaqus User's Manual. Version 4.5. Providence, Rhode Island, USA: Hibbitt, Karlsson & Sovensen (HKS)1986.
11.
NN. Supertab - Manual. Version 3.9.Milford, USA: Structural Dynamics Res Corp1987.
12.
ThubrikarH.J., SkinnerJ.R., EppinkR.T., NolanS.P.Stress analysis of porcine bioprosthetic heart valves in vivo.J Biomed Mater Res1982; 16: 811–26.
13.
SabbahH.N., HamidM.S., SteinP.D.Estimation of mechanical stresses on closed cusps of porcine bioprosthetic valves.Am J Cardiol1985; 55: 1091–6.
14.
ChristieG.W., MedlandI.C.A non-linear finite element stress analysis of bioprosthetic heart valves. In: GallagherR.H., SimonB.R., JohnsonP.C., GrossJ.F., eds. Finite elements in biomechanics.New York: John Wiley, 1982; 153–79.
15.
GhistaD.N., ReulH., RayG., ChandranK.B.Optimal design of aortic leaflet prosthesis.J Eng Mech Div Proc Am Soc Civ Eng1978; 104: 97–117.
16.
TrowbridgeE.A., CroftsC.E.Pericardial heterograft valves: an assessment of leaflet stresses.J Biomed Eng1987; 9: 345–55.
17.
KnierbeinB., SchleedeK., SturmCh, ReulH., RauG.Stress simulation in the PUR diaphragm of a blood pump.Kunststoffe/German Plastics1988; 78: 24–5.
