Pellethane 2363 80A catheters were modified with poly(ethylene oxide) in order to improve their blood compatibility. Contact angle measurements showed that Pellethane 2363 80A surfaces had increased wettability after this modification. The results of in vitro blood compatibility tests showed that surface modification with poly(ethylene oxide) resulted in a five-fold reduction of platelet deposition. Activation of coagulation was not affected.
LelahM.D., CooperS.L.Present status and future directions. In: Polyurethanes in medicine.Boca Raton1986; 211–2.
2.
MerrillE.W., SalzmanE.W.Polyethylene oxide as a biomaterial.J Am Soc Artif Intern Organs1983; 60–4.
3.
MerrillE.W., SalzmanE.W., DennisonK.A.Non-ad-sorptive hydrogels for blood contact. In: NoseY., Kjell-strandC., IvanovichP., eds. Progress in artificial organs.Cleveland: ISAO Press, 1986; 909–12.
4.
BotsJ.G.F., van der DoesL, BantjesA.Small diameter blood vessel prostheses from blends of poly(ethylene oxide) and poly(propylene oxide.Biomaterials1986; 7: 393–9.
5.
RatnerB.D., PaynterR.W.Polyurethane surfaces: the importance of molecular weight distribution, bulk chemistry and casting conditions. In: PlanckG., EgbersG., SyreI., eds. Polyurethanes in biomedical engineering.Amsterdam: Elsevier, 1984; 41–68.
6.
LelahM.D., GraselT.G., PierceJ.A.Ex vivo interactions and surface property relationships of polyether-urethanes.J Biomed Mater Res1986; 20: 433–68.
PootA., BeugelingT., CazenaveJ.P.Platelet deposition in a capillary perfusion model. Quantitative and morphological aspects.Biomaterials1988; 9: 126–32.
9.
CazenaveJ.P., MulvihillJ.N., HuismanJ.G.The use of monoclonal antibodies against platelet membrane glycoproteins to measure platelet accumulation on artificial surfaces. In: JollesG., LegrandY., NurdenA., eds. Biology and pathology of the platelet: vessel wall interactions.New York: Academic Press, 1987; 375.
10.
PootA., DekkerA., BeugelingT.The effect of vascular cell seeding on platelet deposition in an in vitro capillary perfusion model (submitted).
11.
KimS.W., LeeR.G., OsterH.Platelet adhesion to polymer surfaces.Trans Am Soc Artif Int Org1974; 20: 449–55.
12.
LymanD.J., KnutsonK., McNeillB.The effect of chemical structure and surface properties of synthetic polymers on the coagulation of blood.Trans Am Soc Artif Int Organs1975; 21: 49–53.
13.
BriggsD.Analysis and chemical imaging of polymer surfaces by SIMS. In: FeastM.J., MunroH.S., eds. Polymer surfaces and interfaces.New York: John Wiley and Sons Ltd, 1987; 47–8.
14.
MoriY., NagaokaS., TakiuchiH.A new antithrom-bogenic material with long polyethylene oxide chains.Trans Am Soc Artif Int Organs1982; 28: 459–63.
15.
NagaokaS., MoriY., TakiuchiH.Interaction between blood components and hydrogels with poly(oxyethylene) chains. In: ShalabyS.W., HoffmanA.S., RatnerB.D. eds. Polymers as biomaterials.New York: Plenum Press, 1984; 361–74.
