Effect of blade curvature on the hemolytic and hydraulic characteristics of a centrifugal blood pump

Abstract

Aims:

Impeller design has a significant impact on the overall performance of a blood pump. In this study, the effect of the blade curvature was investigated by performing in silico and in vitro studies on a recently developed centrifugal blood pump.

Methods:

A computational fluid dynamics study was performed for the flow rates of 3–5 L/min at 2000 r/min. The computational fluid dynamics model was also applied on the US Food and Drug Administration (FDA) benchmark blood pump to validate our computational method. The relative hemolysis index was calculated with the Eulerian hemolysis estimation method for five impellers with the wrap angles ranging from 0° to 240°. Hydraulic experiments were conducted for the validation of computational fluid dynamics results. In addition, the curved-blade impeller (120°) and the straight-blade impeller (0°) were evaluated with in vitro hemolysis tests using human blood.

Results:

The wrap angle of 120° provided the best hydraulic and hemolytic performance. Pump achieved the physiologic operating pressures and flows with 85–115 mmHg at 2.5–5.9 L/min. Compared to the straight-blade impeller, the 120° model reduces the relative hemolysis index and the plasma-free hemoglobin near 72.8% and 56.7%, respectively. Comparison of in silico and in vitro results indicated the similar trend to the blade curvature.

Conclusion:

Introducing a blade curvature enhanced the hydrodynamic and hemolytic performance compared to the straight-blade configuration for the investigated centrifugal blood pump. The findings of this study provide new insights into centrifugal blood pump design by examining the influence of the blade curvature.

Keywords

Centrifugal blood pump computational fluid dynamics hemolysis estimation blade curvature impeller design

Get full access to this article

View all access options for this article.

References

Thamsen

Granegger

Kertzscher

Blood damage in ventricular assist devices. Int J Artif Organs 2016; 39(4): 147–149.

Thamsen

Mevert

Lommel

et al . A two-stage rotary blood pump design with potentially lower blood trauma: a computational study. Int J Artif Organs 2016; 39(4): 178–183.

Mozafari

Rezaienia

Paul

et al . The effect of geometry on the efficiency and hemolysis of centrifugal implantable blood pumps. ASAIO J 2017; 63(1): 53–59.

Thamsen

Plamondon

Granegger

et al . Investigation of the axial gap clearance in a hydrodynamic-passive magnetically levitated rotary blood pump using X-ray radiography. Artif Organs 2018; 42(5): 510–515.

Zhou

Shi

Performance optimization in a centrifugal pump impeller by orthogonal experiment and numerical simulation. Adv Mech Eng 2013; 5: 385809.

Throckmorton

Sciolino

Downs

et al . Controlled pitch-adjustment of impeller blades for an intravascular blood pump. ASAIO J 2012; 58(4): 382–389.

Gesenhues

Pauli

Behr

Strain-based blood damage estimation for computational design of ventricular assist devices. Int J Artif Organs 2016; 39: 166–170.

Schüle

Thamsen

Blümel

et al . Experimental and numerical investigation of an axial rotary blood pump. Artif Organs 2016; 40(11): E192–E202.

Song

Chua

Lim

TM.

Numerical study of a centrifugal blood pump with different impeller profiles. ASAIO J 2010; 56(1): 24–29.

10.

Taskin

Fraser

Zhang

et al . Evaluation of Eulerian and Lagrangian models for hemolysis estimation. ASAIO J 2012; 58(4): 363–372.

11.

U.S. Food & Drug Administration. Computational fluid dynamics: an FDA critical path initiative project, https://www.fda.gov/MedicalDevices/ScienceandResearch/ResearchPrograms/ucm477381.htm (accessed 13 December 2017).

12.

Garon

Farinas

MI.

Fast three-dimensional numerical hemolysis approximation. Artif Organs 2004; 28(11): 1016–1025.

13.

Stepanoff

AJ.

Centrifugal and axial flow pumps: theory, design, and application. New York: John Wiley, 1948.

14.

Scheit

Karic

Becker

Effect of blade wrap angle on efficiency and noise of small radial fan impellers—a computational and experimental study. J Sound Vib 2012; 331(5): 996–1010.

15.

Tan

Zhu

Cao

et al . Influence of blade wrap angle on centrifugal pump performance by numerical and experimental study. Chin J Mech Eng 2014; 27(1): 171–177.

16.

ANSYS fluent theory guide. Release 15.0, November 2013.

17.

Hsu

P-L

Graefe

Boehning

et al . Hydraulic and hemodynamic performance of a minimally invasive intra-arterial right ventricular assist device. Int J Artif Organs 2014; 37(9): 697–705.

18.

Thamsen

Blümel

Schaller

et al . Numerical analysis of blood damage potential of the HeartMate II and HeartWare HVAD rotary blood pumps. Artif Organs 2015; 39(8): 651–659.

19.

Taskin

Fraser

Zhang

et al . Computational characterization of flow and hemolytic performance of the UltraMag blood pump for circulatory support. Artif Organs 2010; 34(12): 1099–1113.

20.

Yakhot

Smith

LM.

The renormalization group, the ε-expansion and derivation of turbulence models. J Sci Comput 1992; 7(1): 35–61.

21.

Giersiepen

Wurzinger

Opitz

et al . Estimation of shear stress—related blood damage in heart valve prostheses—in vitro comparison of 25 aortic valves. Int J Artif Organs 1990; 13(5): 300–306.

22.

Heuser

Opitz

A Couette viscometer for short time shearing of blood. Biorheology 1980; 17(1–2): 17–24.

23.

Bludszuweit

Model for a general mechanical blood damage prediction. Artif Organs 1995; 19(7): 583–589.

24.

Ishii

Hosoda

Nishida

et al . Hydrodynamic characteristics of the helical flow pump. J Artif Organs 2015; 18(3): 206–212.

25.

Malinauskas

Hariharan

Day

et al . FDA benchmark medical device flow models for CFD validation. ASAIO J 2017; 63(2): 150–160.

26.

ISO 14708-5:2010. Implants for surgery—active implantable medical devices—part 5: circulatory support devices.

27.

Heck

Yen

Snyder

et al . Flow-field simulations and hemolysis estimates for the Food and Drug Administration critical path initiative centrifugal blood pump. Artif Organs 2017; 41(10): E129–E140.

28.

ASTM F1841-97:2017. Standard practice for assessment of hemolysis in continuous flow blood pumps.

29.

Dasi

Sotiropoulos

et al . Characterization of hemodynamic forces induced by mechanical heart valves: Reynolds vs. viscous stresses. Ann Biomed Eng 2008; 36(2): 276–297.