Abstract
Background
Until today, tissue heart valve prostheses have been made with biological dead porcine or bovine tissue. However, the durability of this tissue is limited due to degeneration and calcification. Surface seeding with vital human endothelial cells (EC) could improve valve durability and bio-compatibility. A new seeding technique that includes a newly developed special seeding device is presented here.
Methods
The aortic valve, including a cylinder of the aortic root, was prepared from a fresh porcine heart taken from the slaughterhouse. Porcine endothelial cells were removed by surface treatment with chemical detergent solutions. A new seeding device with an integrated CO2-incubator was designed. The device is composed of: the seeding chamber (SC), the rotation unit (RU), and the Control Unit (CU). The porcine aortic root cylinder with the valve leaflets is placed into the SC. A matrix of fibronectin is applied to the acellular valve. The SC is then filled with the endothelial cells suspended in modified Dulbecco's eagle medium (DMEM). Under cell culture conditions, the endothelial cell seeding of the tissue valve is established by rotating the valve around two orthogonal axes simultaneously and independently. This is done following the software controlled preset parameters.
Results
Using initial endothelial cell seeding concentrations of 6×106 endothelial cells/ml DMEM, it was possible to achieve a seeding efficiency of 80–85% within 3–4 hrs. Cell viability tests proved that 90–95% of the seeded endothelial cells are vital after the seeding procedure.
Conclusions
This new seeding technique allows the complex warped surface of a tissue heart valve to be covered with vital endothelial cells to form a confluent endothelial cell monolayer.
Get full access to this article
View all access options for this article.