Abstract
Nineteen patients with the clinical diagnosis of anterior cruciate ligament injury were examined by KT-1000 ar thrometry before arthroscopy in an effort to differentiate partial from complete tears. To this end, the KT-1000 arthrometer was equipped with a strain gauge and pro cessor that permitted the required force to increase the anterior displacement by 1-mm increments, to be read on a light-emitting diode. The measured force has been plotted against anterior displacement expressed in non linear increments along the x-axis to allow for the vis coelastic nature of the ligament. The results show that stress-strain diagrams of partially torn and completely torn ligaments are similar to those obtained by graded stress radiography. Using arthroscopy as the standard of measurement, partial tears can be differentiated from complete tears with a sensitivity of 80% and a specificity of 100%. The figures for complete tears versus partial tears are 100% and 80%, respectively. Graded arthrom etry with x-y recording of the force-displacement rela tionship that allows for the viscoelastic qualities of liga ment further extends the capabilities of instrumented arthrometry.
Get full access to this article
View all access options for this article.