Customized knee braces for three normal subjects were instrumented to monitor the forces and moments across the hinges as the subjects performed various activities. The forces and moments were taken to rep resent a mismatch between actual knee motion and the motion the brace sought to impose. The different hinge designs studied were fixed axis, gear-on-gear, rack- and-pinion, and natural 3-D; they showed only moder ate differences in forces. Much larger differences were seen if the hinges were offset 12 mm from the ideal placement. Posterior placement resulted in the least force and anterior placement the highest.
The mismatch of knee motion to brace motion would probably lead to abnormal ligament lengths and ten sions and other internal mechanical changes, as well as to pistoning and discomfort. The results of this study have implications on brace design, selection, and place ment.
Get full access to this article
View all access options for this article.
References
1.
Ahmed AM, Burke DL: In-vitro measurement of static pressure distribution in synovial joints, Part 1. Tibial surface of the knee. J Biomech Eng105: 216-225, 1983
2.
American Academy of Orthopedic Surgeons. Knee Braces, Seminar Report. Chairman, D Drez Jr, Chicago, IL, Aug 1984
3.
Andriacchi TP , Stanwyck TS, Galante JO: Knee biomechanics and total knee replacement J Arthroplasty1. 211-219, 1986
4.
Bassett GS, Fleming BW The Lenox Hill Brace in anterolateral rotatory Instability. Am J Sports Med11: 345-348, 1983
5.
Beck C., Drez D., Young J., et al: Instrumented testing of functional knee braces. Am J Sports Med14. 253-256, 1986
6.
Beets CL, Chippinge FW, Hazard PR, et al: Orthoses and the dynamic knee, a basic overview. Orthotics Prosthetics39: 33-39, 1985
7.
Blankevoort L., Huiskes R., de Lange A.: Helical axes along the envelop of passive knee joint motion. Trans Orthop Res Soc11410, 1986
8.
Butler DL, Kay MD, Stouffer DC: Comparison of material properties in fascicle-bone units from human patellar tendon and knee ligaments. J Biomech19: 425-432, 1986
9.
Colville MR, Lee CL, Cuillo JV The Lenox Hill Brace. An evaluation of effectiveness in treating knee instability . Am J Sports Med14: 257-261, 1986
10.
Furman W., Marshall JL, Girgis FG: The anterior cruciate ligament. A functional analysis based on postmortem studies J Bone Joint Surg58A. 179-185, 1976
11.
Girgis FG, Marshall JL, Al Monajem Ars. The cruciate ligaments of the knee joint Anatomical, functional and experimental analysis Clin Orthop106. 216-231, 1975
12.
Grood ES, Hefzy MS, Butler DL, et al Intra-articular vs over the top placement of anterior cruciate ligament substitute. Trans Orthop Res Soc1179,1986
13.
Hefzy MS, Grood ES, Lindenfeld TL: The posterior cruciate ligament A new look at length patterns Trans Orthop Res Soc11128, 1986
14.
Hofmann AA, Wyatt Rwb, Daniel AU: Knee stability in orthotic knee braces. Trans Orthop Res Soc9135, 1984
15.
Houston ME, Goemans PH Leg muscle performance of athletes with and without knee support braces . Arch Phys Med Rehabil63: 431-432, 1982
16.
Huiskes R., Blankevoort L., van Dijk R., et al. Ligament deformation patterns in passive knee joint motions , in Spilker RL (ed) Advances in Bioengineermg. New York, American Society of Mechanical Engineers, 1984
17.
Iglehart TK: Strength and motor task performance as effected by the carbon titanium knee brace in normal healthy males. Colorado State University, Dept of Physical Education, Fort Collins, Colorado , 1985
18.
Knutzen KM, Bates BT, Hammill J. Knee brace influences on the tibial rotation and torque patterns of the surgical limb J Orthop Sports Phys Ther6. 116-122, 1984
19.
Kurosawa H. , Walker PS, Abe S., et al. Geometry and motion of the knee for implant and orthoic design J Biomech18. 487-499, 1985
20.
Latta LL, Finnieston AR (eds). Orthotics in Rehabilitation, in Encyclopedia of Medical Devices and Instrumentation, New York, John Wiley & Sons Inc
21.
Lew WD, Patrnchak CM, Lewis JC, et al. A comparison of pistoning forces in orthotic knee joints Orthotics Prosthetics36. 85, 1984
22.
Lewis JL, Lew WD A method for locating the optimal fixed axis of rotation of the human knee joint J Biomech Eng101. 187-193, 1979
23.
Markolf KL, Bargar WL, Shoemaker SC, et al The role of joint load in knee stability. J Bone Joint Surg63A. 570-585, 1981
24.
Murphy MC, Farins B., Jasty M., et al: In vivo measurement of the 3-dimensional skeletal motion at the normal knee, in Spilker RL (ed), Advances m Bioengineering New York, American Society of Mechanical Engineering, 1984
25.
Rovick JS, Reuben JD, Robertson DD, et al. Control of knee kinematics by ligaments. Trans Orthop Res Soc12: 126, 1987
26.
Rovick JS, Walker PS: Design of an off-the-shelf knee orthosis using averaging techniques . Proc Rehab Eng Soc North Am:107, 1986
27.
Teitz CC, Hermanson BK, Kronmal RA, et al. Evaluation of the use of braces to prevent injury to the knee in collegiate football players. J Bone Joint Surg59A. 2-9, 1987
28.
Trappitt AE , Berme N. A transducer for the measurement of lower limb orthotic loads Eng Med10. 149-153, 1981
29.
Walker PS, Kurosawa H., Rovick JS, et al: External knee joint design based on normal motion J Rehabil Res Dev229-22, 1985
30.
Walker PS, Rovick JS, Robertson DD The effects of knee brace hinge design and placement on joint mechanics . J Biomech21: 965-974, 1988
