Abstract
The primary objective of most procedures for asphalt concrete mix design is to find an asphalt content that minimizes the possibility of stability failure while providing adequate fatigue and other durability characteristics. To date, the consequences of asphalt content selection and construction compaction on fatigue performance and flexural stiffness have not been thoroughly investigated and documented with experimental data. The results of laboratory-controlled strain flexural beam testing, (i.e., fatigue life and flexural stiffness) for one aggregate and asphalt cement combination, five asphalt contents, and three air void contents are presented. The results clearly indicate the benefits of a lower air void content on both fatigue life and initial stiffness. Increased asphalt content was found to increase fatigue life and reduce stiffness. Alternative models for predicting fatigue life and initial stiffness using asphalt content, air void content, voids filled with bitumen, and the volume concentrations of asphalt and aggregate were evaluated. Elastic-layer theory was used to simulate the effects of air void content and asphalt content on the fatigue life of several example overlays using the models for stiffness and fatigue life from the laboratory testing. The simulations indicated an increase in predicted pavement fatigue life for lower air void contents and higher asphalt contents. Example simulations of the effects of increased asphalt content and decreased air void content at the bottom of thick overlays indicated a marked increase in predicted fatigue life. It was also concluded that stiffness should not be included in regression for fatigue life models for mix design unless there is a clear understanding of the effects of other variables in the model that correlate with both fatigue life and stiffness.
Get full access to this article
View all access options for this article.