Finite-Element Modeling of G2 Guardrail

Abstract

A finite-element model of the AASHTO G2 guardrail (weak-post W-beam) was developed and analyzed under vehicle impact conditions by using LLNL-DYNA3D, a nonlinear, explicit, three-dimensional, public-domain, finite-element code. The modeling procedures and problems encountered are described, and suggestions for further research are given. W-beam and S3 × 5.7 steel post mesh optimization procedures and results are described. A suitable point of fixity for the posts to account for soil effects is determined. W-beam-to-post connections were investigated by three different methods. Impact influence lengths and problems associated with modeling flexible barriers are discussed. The steps taken to assemble a model, including a prebuilt vehicle model, are given. The G2 guardrail was struck with the 820C vehicle model, developed by FHWA, at a speed of 26.69 m/sec (59.7 mph) and an angle of 15.4 degrees.

Get full access to this article

View all access options for this article.

References

Roadside Design Guide. AASHTO, Washington, D.C., 1988.

Schauer

Comments on the Efficiency of Simulation Methods. In Transportation Research Circular 435: Roadside Safety Issues, TRB, National Research Council, Washington, D.C., 1995.

Bronstad

M. E.

, Michie

D. J.

, and Mayer

J. D.

Jr. NCHRP Report 289: Performance of Longitudinal Traffic Barriers. TRB, National Research Council, Washington, D.C., 1987.

Michie

J. D.

, Calcote

L. R.

, and Bronstad

M. E.

. NCHRP Report 115: Guardrail Performance and Design. HRB, National Research Council, Washington, D.C., 1971.

Graham

M. D.

, Burnett

N. C.

, Gibson

J. L.

, and Freer

R. H.

. New Highway Barriers: The Practical Application of Theoretical Design. In Highway Research Record 174, HRB, National Research Council, Washington, D.C., 1967, pp. 88–179.

Sicking

D. L.

Applications of Simulation in Design and Analysis of Roadside Safety Features. In Transportation Research Circular 435: Roadside Safety Issues, TRB, National Research Council, Washington, D.C., 1995.

A Guide to Standardized Highway Barrier Rail Hardware. ARTBA Technical Bulletin 268-AGC, Standard Form 131 American Road and Transportation Builders Association, Washington, D.C., 1979, pp. 91–150.

Whirley

R. G.

, and Engelmann

B. E.

. DYNA3D, A Nonlinear, Explicit, Three-Dimensional Finite Element Code for Solid and Structural Mechanics User Manual. UCRL-MA-107254, Rev. 1. Lawrence Livermore National Laboratory. Livermore, Calif., 1993.

Wekezer

J. W.

Finite Element Modeling of Motor Vehicles. Protocol for Developing INGRID Data Input Decks for DYNA3D Computer Code. Technical Report FHWA-RD-94-153. FHWA, U.S. Department of Transportation, 1994.

10.

Michie

J. D.

NCHRP Report 230: Recommended Procedures for the Safety Performance Evaluation of Highway Appurtenances. TRB, National Research Council, Washington, D.C., 1995.