This study evaluated the impact of using Warm Mix Technologies (WMTs) to lower asphalt production temperatures on energy consumption and mixture performance characteristics. Two experiments were conducted using Alabama Department of Transportation-approved Hot Mix Asphalt (HMA) designs. The first experiment compared two Warm Mix Asphalt (WMA) mixtures, produced using chemical additives WMT1 and WMT2, with a control HMA mixture. The second experiment involved one control HMA mixture and one WMA mixture using WMT1 produced at multiple temperatures. Both experiments evaluated burner fuel consumption, intermediate cracking resistance using the IDEAL-CT test, and rutting resistance using the Hamburg wheel-tracking test and high-temperature indirect tensile test. Experiment 1 used reheated plant-mixed, lab-compacted (RH-PMLC) and lab-mixed, lab-compacted (LMLC) specimens, while Experiment 2 used hot-compacted plant-mixed, lab-compacted (H-PMLC) specimens. The results indicated that using WMTs at lower production temperatures can reduce energy consumption by approximately 20%, potentially lowering emissions. The cracking resistance of WMA mixtures was similar to that of the control HMA when using plant-mixed samples. However, significantly better cracking resistance was observed when using LMLC samples. In addition, rutting and moisture resistance were comparable or reduced for WMA mixtures but still met the minimum rutting requirement. This study confirms that lowering the production temperature of WMA mixtures can reduce burner energy consumption and emissions without compromising mixture performance characteristics.
SabouriM.SadeghiM.Investigation on Properties of Cold Recycled Asphalt Mixtures Reinforced with Polypropylene Fibers. Amirkabir Journal of Civil Engineering, Vol. 55, No. 3, 2023, pp. 583–602.
2.
SukhijaM.SabooN.A Comprehensive Review of Warm Mix Asphalt Mixtures-Laboratory to Field. Construction and Building Materials, Vol. 274, 2021, p. 121781.
3.
CapitãoS.Picado-SantosL.MartinhoF.Pavement Engineering Materials: Review on the Use of Warm-Mix Asphalt. Construction and Building Materials, Vol. 36, 2012, pp. 1016–1024.
4.
RubioM. C.MartínezG.BaenaL.MorenoF.Warm Mix Asphalt: An Overview. Journal of Cleaner Production, Vol. 24, 2012, pp. 76–84.
5.
WilliamsB. A.WillisJ. R.ShacatJ.Asphalt Pavement Industry Survey on Recycled Materials and Warm-Mix Asphalt Usage: 2022. National Asphalt Pavement Association, Greenbelt, M. D., 2024.
6.
CheraghianG.FalchettoA. C.YouZ.ChenS.KimY. S.WesterhoffJ.MoonK. H.WistubaM. P.Warm Mix Asphalt Technology: An up to Date Review. Journal of Cleaner Production, Vol. 268, 2020, p. 122128.
7.
GuoM.LiuH.JiaoY.MoL.TanY.WangD.LiangM.Effect of WMA-RAP Technology on Pavement Performance of Asphalt Mixture: A State-of-the-Art Review. Journal of Cleaner Production, Vol. 266, 2020, p. 121704.
8.
BairgiB. K.MannaU. A.TarefderR. A.Tribological Evaluation of Asphalt Binder with Chemical Warm-Mix Additives. In International Airfield and Highway Pavements Conference 2019. American Society of Civil Engineers, Reston, VA, 2019.
9.
ZhaoS.HuangB.ShuX.MooreJ.BowersB.Effects of WMA Technologies on Asphalt Binder Blending. Journal of Materials in Civil Engineering, Vol. 28, No. 2, 2016, p. 04015106.
10.
BehnoodA.A Review of the Warm Mix Asphalt (WMA) Technologies: Effects on Thermo-Mechanical and Rheological Properties. Journal of Cleaner Production, Vol. 259, 2020, p. 120817.
11.
YousefiA.BehnoodA.NowruziA.HaghshenasH.Performance Evaluation of Asphalt Mixtures Containing Warm Mix Asphalt (WMA) Additives and Reclaimed Asphalt Pavement (RAP). Construction and Building Materials, Vol. 268, 2021, p. 121200.
12.
CaputoP.AbeA. A.LoiseV.PortoM.CalandraP.AngelicoR.RossiC. Oliviero. The Role of Additives in Warm Mix Asphalt Technology: An Insight into Their Mechanisms of Improving an Emerging Technology. Nanomaterials, Vol. 10, No. 6, 2020, p. 1202.
13.
FakhriM.ArzjaniD.AyarP.MottaghiM.ArzjaniN.Performance Evaluation of WMA Containing Re-Refined Acidic Sludge and Amorphous Poly Alpha Olefin (APAO). Sustainability, Vol. 13, No. 6, 2021, p. 3315.
14.
Garcia CucalonL.KassemE.LittleD. N.MasadE.Fundamental Evaluation of Moisture Damage in Warm-Mix Asphalts. Road Materials and Pavement Design, Vol. 18, No. 1, 2017, pp. 258–283.
15.
ZaumanisM.Warm Mix Asphalt. Climate Change, Energy, Sustainability and Pavements. Springer, Cham, 2014, pp. 309–334.
16.
BairgiB. K.TarefderR. A.SyedI.MendezM. M.AhmedM.MannanU. A.RahmanT.Assessment of Rutting Behavior of Warm-Mix Asphalt (WMA) with Chemical WMA Additives Towards Laboratory and Field Investigation. In International Conference on Transportation and Development 2018. American Society of Civil Engineers, Reston, V.A., 2018.
17.
WenH.WuS.MohammadL. N.ZhangW.ShenS.FaheemA.Long-Term Field Rutting and Moisture Susceptibility Performance of Warm-Mix Asphalt Pavement. Transportation Research Record, Vol. 2575, No. 1, 2016, pp. 103–112.
18.
BairgiB. K.RahmanA. A.TarefderR. A.LarrainM. M. M.Comprehensive Evaluation of Rutting of Warm-Mix Asphalt Utilizing Long-Term Pavement Performance Specific Pavement Studies. Transportation Research Record, Vol. 2674, No. 7, 2020, pp. 272–283.
19.
HillB.Performance Evaluation of Warm Mix Asphalt Mixtures Incorporating Reclaimed Asphalt Pavement. University of Illinois at Urbana-Champaign, Champaign, I.L., 2011.
20.
YinF.MooreN.ChenC.TaylorA.Case Study on Using Warm Mix Asphalt at Reduced Production Temperatures for Balanced Mix Design. Transportation Research Record, Vol. 2679, No. 1, 2023, pp. 1064–1077.
21.
DaoD. V.NguyenN.-L.NguyenM. H.LyH.-B.TruongT. Q.Evaluation of Cracking Resistance of Warm Mix Asphalt Incorporating High Reclaimed Asphalt Pavement Content. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Vol. 236, No. 12, 2022, pp. 2550–2560.
22.
AkentunaM.MohammadL. N.BoatengK. A.CooperS.Warm Mix Asphalt Demonstration Projects in Louisiana: Case Study of Five to Eight Years of Field Performance. Transportation Research Record, Vol. 2676, No. 9, 2022, pp. 148–158.
23.
ALDOT. Standard Specifications for Highway Construction. Section 424.02 (e). Alabama Department of Transportation, Montgomery, Alabama, 2022.
24.
MooreN.TaylorA.Guide on Asphalt Mixture Specimen Fabrication for BMD Performance Testing. NAPA Information Series 145, Gainesville, 2023.
25.
AASHTO. Standard practice for laboratory conditioning of asphalt mixtures (AASHTO R30). American Association of State Highway and Transportation Officials (AASHTO), Washington, D.C., 2022.
26.
ALDOT. Standard Specifications for Highway Construction. Section 807.07 (c). Alabama Department of Transportation, Montgomery, Alabama, 2022.
27.
AASHTO. Standard Specification for Performance-Graded Asphalt Binder (AASHTO M320). American Association of State Highway and Transportation Officials (AASHTO), Washington, D.C., 2023.
28.
ALDOT. Standard Specifications for Highway Construction. Section 424 (d). Alabama Department of Transportation, Montgomery, Alabama, 2022.
ZhouF.ImS.SunL.ScullionT.Development of an IDEAL Cracking Test for Asphalt Mix Design and QC/QA. Road Materials and Pavement Design, Vol. 18, No. 4, 2017, pp. 405–427.
31.
YinF.WestR.PowellB.DuBoisC.Short-Term Performance Characterization and Fatigue Damage Prediction of Asphalt Mixtures Containing Polymer-Modified Binders and Recycled Plastics. Transportation Research Record, Vol. 2679, No. 1, 2023, pp. 742–759.
32.
YinF.ChenC.MoraesR.HanzA.HehirJ.KnudtsonD.Impact of Polymer Modification on IDEAL-CT and I-FIT for Cracking Resistance Evaluation of Asphalt Mixtures. Department of Transportation, Office of Research & Innovation, Minnesota, 2023.
33.
ALDOT. Standard Specifications for Highway Construction. Section 424.02 (c). Alabama Department of Transportation, Montgomery, Alabama, 2022.
HasanM. R. M.YouZ.PorterD.GohS. W.Laboratory Moisture Susceptibility Evaluation of WMA Under Possible Field Conditions. Construction and Building Materials, Vol. 101, 2015, pp. 57–64.
36.
HurleyG. C.ProwellB. D.Evaluation of Aspha-Min Zeolite for Use in Warm Mix Asphalt. NCAT Report, 2005.
