The current study is focused on the characteristics of sustainable engineered cementitious composites (ECCs) with the inclusion of various types of fibers (PVA, PET, and MSE) in hybridization, silica sand (SS), river sand (RS), and stone processing waste (SPW). SPW is termed as hazardous material because of the presence of finer particles and inorganic substances which contribute to leaching problems, and cause adverse effects on aquatic life and human health. The objective of this study was to introduce new kind of cost-effective, sustainable, and greener ECC to encourage its use in diversified applications. The characteristics of different ECC mixtures were assessed by observing the slump flow, compressive, tensile, flexural, ultrasonic pulse velocity, air permeability, electrical resistivity (ER), sorptivity, ecological behavior, and cost analysis. Experimental results revealed that the combination of micro-fibers enhanced the overall performance of ECC with reduction in the matrix cost. The addition of SPW in place of aggregates enhanced the flowability, strength, and durability characteristics, and contributed to reducing the carbon dioxide emissions. This study confirms that the combined use of PVA, PET, and MSE fibers with SPW inclusion is a promising alternative over the fully PVA blended ECC with SS.
NevilleA. M.Properties of Concrete, 5th ed.Trans-Atlantic Publications, Harlow, England, 2012.
3.
KumarV.KumarA.PrasadB.Mechanical Behavior of Non-Silicate-Based Alkali-Activated Ground Granulated Blast Furnace Slag. Construction and Building Materials, Vol. 198, 2019, pp. 494–500.
4.
GoelS.SinghS. P.SinghP.Flexural Fatigue Strength and Failure Probability of Self Compacting Fibre Reinforced Concrete Beams. Engineering Structures, Vol. 40, 2012, pp. 131–140.
5.
SinghM.SainiB.ChalakH. D.Performance and Composition Analysis of Engineered Cementitious Composite (ECC) – A Review. Journal of Building Engineering, Vol. 26, 2019, p.100851.
6.
LiV. C.Engineered Cementitious Composites (ECC) - Tailored Composites Through Micromechanical Modeling. In Fiber Reinforced Concrete (BanthiaN.BenturA.MuftiA. A., eds.), Canadian Society for Civil Engineering, Montreal, 1998, pp. 64–97.
7.
LiV. C.KandaT.Engineered Cementitious Composites for Structural Applications. Journal of Materials in Civil Engineering, Vol. 10, 1998, pp. 66–69.
8.
SinghM.SainiB.ChalakH. D.Properties of Engineered Cementitious Composites: A Review. Proc., 1st International Conference on Sustainable Waste Management Through Design, Ludhiana, India, 2019, pp. 473–483.
9.
LiV. C.Engineered Cementitious Composites (ECC) - Material, Structural, and Durability Performance. In Concrete Construction Engineering Handbook (NawyE. G., ed.), CRC Press, Boca Raton, FL, 2008.
10.
SinghM.SainiB.ChalakH. D.Appraisal of Hybrid Fiber Reinforced Engineered Cementitious Composite. Proc., International Conference on Civil, Structural and Transportation Engineering, Ottawa, Canada, 2019, pp. 1–8.
11.
SahmaranM.YücelH. E.DemirhanS.ArýkM. T.LiV. C.Combined Effect of Aggregate and Mineral Admixtures on Tensile Ductility of Engineered Cementitious Composites. ACI Materials Journal, Vol. 109, 2012, pp. 627–638.
12.
de KokerD.van ZijlG.Extrusion of Engineered Cement-Based Composite Material. Proc., 6th RILEM Symposium on Fiber-Reinforced Concretes (FRC), Italy, 2004, pp. 1301–1310.
13.
YuK. Q.YuJ. T.DaiJ. G.LuZ. D.ShahS. P.Development of Ultra-High Performance Engineered Cementitious Composites Using Polyethylene (PE) Fibers. Construction and Building Materials, Vol. 158, 2018, pp. 217–227.
14.
ZhouY.XiB.YuK.SuiL.XingF.Mechanical Properties of Hybrid Ultra-High Performance Engineered Cementitious Composites Incorporating Steel and Polyethylene Fibers. Materials, Vol. 11, No. 8, 2018, p. 1448. https://doi.org/10.3390/ma11081448.
15.
GameD.ArceG.HassanM. M.NoorvandH.SubediS.RupnowT.Development of Practical and Cost-Effective Ultra-High-Performance Engineered Cementitious Composites Using Natural Sand and no Silica Fume. Transportation Research Record: Journal of the Transportation Research Board, 2022. https://doi.org/10.1177/03611981221078287.
16.
StevenM. K.The UHMWPE Handbook: Ultra-High Molecular Weight Polyethylene in Total Joint Replacement. Academic Press, San Diego, CA, 2004.
17.
Carl RedonB.LiV. C.WuC.HoshiroH.SaitoT.OgawaA.Measuring and Modifying Interface Properties of PVA Fibers in ECC Matrix. Journal of Materials in Civil Engineering, Vol. 13, 2001, pp. 399–406.
18.
PanZ.WuC.LiuJ.WangW.LiuJ.Study on Mechanical Properties of Cost-Effective Polyvinyl Alcohol Engineered Cementitious Composites (PVA-ECC). Construction and Building Materials, Vol. 78, 2015, pp. 397–404.
19.
MengD.HuangT.ZhangY. X.LeeC. K.Mechanical Behaviour of a Polyvinyl Alcohol Fibre Reinforced Engineered Cementitious Composite (PVA-ECC) Using Local Ingredients. Construction and Building Materials, Vol. 141, 2017, pp. 259–270.
20.
PakravanH. R.JamshidiM.LatifiM.Study on Fiber Hybridization Effect of Engineered Cementitious Composites With Low- and High-Modulus Polymeric Fibers. Construction and Building Materials, Vol. 112, 2016, pp. 739–746.
21.
AliM. A. E. M.SolimanA. M.NehdiM. L.Hybrid-Fiber Reinforced Engineered Cementitious Composite Under Tensile and Impact Loading. Materials and Design, Vol. 117, 2017, pp. 139–149.
22.
Ke-QuanY.Zhou-DaoL.Jian-GuoD.ShahS. P.Direct Tensile Properties and Stress–Strain Model of UHP-ECC. Journal of Materials in Civil Engineering, Vol. 32, 2020, p. 04019334.
23.
RanadeR.LiV.StultsM. D.HeardW. F.RushingT. S.Composite Properties of High-Strength, High-Ductility Concrete. ACI Materials Journal, Vol. 110, 2013, pp. 413–422.
24.
DingY.YuJ. T.YuK. Q.XuS. L.Basic Mechanical Properties of Ultra-High Ductility Cementitious Composites: From 40 MPa to 120 MPa. Composite Structures, Vol. 185, 2018, pp. 634–645.
25.
YuK.WangY.YuJ.XuS.A Strain-Hardening Cementitious Composites With the Tensile Capacity up to 8%. Construction and Building Materials, Vol. 137, 2017, pp. 410–419.
26.
LiY.LiJ.YangE. H.GuanX.Mechanism Study of Crack Propagation in River Sand Engineered Cementitious Composites (ECC). Cement and Concrete Composites, Vol. 128, 2022, p. 104434.
27.
SahmaranM.LachemiM.HossainK. M.RanadeR.LiV. C.Influence of Aggregate Type and Size on Ductility and Mechanical Properties of Engineered Cementitious Composites. ACI Materials Journal, Vol. 106, No. 3, 2009, p. 308. https://doi.org/10.14359/56556.
28.
RathodJ. D.PatodiS. C.Interface Tailoring of Polyester-Type Fiber in Engineered Cementitious Composite Matrix Against Pullout. ACI Materials Journal, Vol. 107, 2010, pp. 114–122.
29.
SiddiqueR.KapoorK.KadriE. H.BennacerR.Effect of Polyester Fibres on the Compressive Strength and Abrasion Resistance of HVFA Concrete. Construction and Building Materials, Vol. 29, 2012, pp. 270–278.
30.
Al-AkhrasN. M.AbabnehA.AlarajiW. A.Using Burnt Stone Slurry in Mortar Mixes. Construction and Building Materials, Vol. 24, 2010, pp. 2658–2663.
31.
KhodabakhshianA.de BritoJ.GhalehnoviM.ShamsabadiE. A.Mechanical, Environmental and Economic Performance of Structural Concrete Containing Silica Fume and Marble Industry Waste Powder. Construction and Building Materials, Vol. 169, 2018, pp. 237–251.
32.
AlmeidaN.BrancoF.de BritoJ.SantosJ. R.High-Performance Concrete With Recycled Stone Slurry. Cement and Concrete Research, Vol. 37, No. 2, 2007, pp. 210–220.
33.
SinghM.SrivastavaA.BhuniaD.An Investigation on Effect of Partial Replacement of Cement by Waste Marble Slurry. Construction and Building Materials, Vol. 134, 2017, pp. 471–488.
34.
SinghM.SainiB.ChalakH. D.Long Term Evaluation of Engineered Cementitious Composite Containing Stone Slurry Powder. Construction and Building Materials, Vol. 264, 2020, p. 120183. https://doi.org/10.1016/j.conbuildmat.2020.120183.
35.
ÖzkanŞ.CeylanH.The Effects on Mechanical Properties of Sustainable Use of Waste Andesite Dust as a Partial Substitution of Cement in Cementitious Composites. Journal of Building Engineering, Vol. 58, 2022, p. 104959.
36.
RanaA.KallaP.CsetenyiL. J.Sustainable Use of Marble Slurry in Concrete. Journal of Cleaner Production, Vol. 94, 2015, pp. 304–311.
37.
SinghS.NagarR.AgrawalV.RanaA.TiwariA.Sustainable Utilization of Granite Cutting Waste in High Strength Concrete. Journal of Cleaner Production, Vol. 116, 2016, pp. 223–235.
38.
ASTM C1611. Standard Test Method for Slump Flow of Self-Consolidating Concrete. ASTM International, West Conshohocken, PA, 2004.
39.
BIS:516-1959. Methods of Tests for Strength of Concrete. Bureau of Indian Standards, New Delhi, 2006.
40.
BS-EN-12390-3. Testing Hardened Concrete-Part 3: Compressive Strength of Test Specimens. British Standard Institution, London, UK, 2009.
41.
BS-EN-12390-5. Testing Hardened Concrete-Part 5: Flexural Strength of Test Specimens. British Standard Institution, London, UK, 2009.
42.
BIS:13311. Code of Practice for Non-Destructive Testing of Concrete-Methods of Test Part 1: Ultrasonic Pulse Test. Bureau of Indian Standards, New Delhi, 2004.
43.
ASTM C597-16. Standard Test Method for Pulse Velocity Through Concrete. ASTM International, West Conshohocken, PA, 2016.
44.
AASHTO T358. Standard Method of Test for Surface Resistivity Indication of Concrete’s Ability to Resist Chloride Ion Penetration. American Association of State Highway and Transportation Officials, Washington, D.C., 2015.
45.
ACI 222R-01. Protection of Metals in Concrete Against Corrosion. American Concrete Institute, Farmington Hills, MI, 2001.
KonikiS.PrasadD. R.Influence of Hybrid Fibres on Strength and Stress-Strain Behaviour of Concrete Under Uni-Axial Stresses. Construction and Building Materials, Vol. 207, 2019, pp. 238–248.
48.
SakulichA. R.LiV. C.Nanoscale Characterization of Engineered Cementitious Composites (ECC). Cement and Concrete Research, Vol. 41, 2011, pp. 169–175.
49.
SuryantoB.TakaokaH.McCaterW. J.SarairehD.TahaH.Impedance Measurements on an Engineered Cementitious Composite: A Critical Evaluation of Testing Protocols. Measurement: Journal of the International Measurement Confederation, Vol. 129, 2018, pp. 445–456.
50.
BanthiaN.DjeridaneS.PigeonM.Electrical Resistivity of Carbon and Steel Micro-Fiber Reinforced Cements. Cement and Concrete Research, Vol. 22, 1992, pp. 804–814.
51.
SinghM.SainiB.ChalakH.Evaluation of Cost-Effective Hybrid Fiber Reinforced ECC. Sādhanā, Vol. 46, No. 2, 2021, pp. 1–10.
52.
SinghM.SainiB.ChalakH. D.Appraisal on Low Cost and Sustainable ECC Using Microfibers in Hybridization at Later Age. Journal of Engineering Research, Vol. 9, 2021, pp. 147–165.
53.
ForschirmA. S.Method for Improving the Water Absorption of Polyester Fibers. U.S. Patent No. 4063887. Celanese Corporation, New York, NY, 1977.
54.
YuJ.YaoJ.LinX.LiH.LamJ. Y.LeungC. K.ShamI. M.ShihK.Tensile Performance of Sustainable Strain-Hardening Cementitious Composites With Hybrid PVA and Recycled PET Fibers. Cement and Concrete Research, Vol. 107, 2018, pp. 110–123.
55.
ChoiW. C.YunH. D.KangJ. W.KimS. W.Development of Recycled Strain-Hardening Cement-Based Composite (SHCC) for Sustainable Infrastructures. Composites Part B: Engineering, Vol. 43, 2012, pp. 627–635.
56.
SharmaR.KhanR. A.Sustainable Use of Copper Slag in Self-Compacting Concrete Containing Supplementary Cementitious Materials. Journal of Cleaner Production, Vol. 151, 2017, pp. 179–192.
57.
YangK. H.SongJ. K.SongK. I.Assessment of CO2 Reduction of Alkali-Activated Concrete. Journal of Cleaner Production, Vol. 39, 2013, pp. 265–272.
58.
MastaliM.DalvandA.SattarifardA. R.IllikainenM.Development of Eco-Efficient and Cost-Effective Reinforced Self-Consolidation Concretes With Hybrid Industrial/Recycled Steel Fibers. Construction and Building Materials, Vol. 166, 2018, pp. 214–226.
