Development,Crash Testing,and Evaluation of Portable Concrete Barriers Gap-Spanning Hardware

Abstract

Portable concrete barriers (PCBs) are commonly used to protect work-zone personnel and to shield motorists from hazards in construction areas. It is not uncommon to encounter longitudinal gaps within PCB installations resulting from the practice of constructing and connecting the barriers from different ends during setup or contractor operations. Longitudinal gaps can also be created by tensioning issues following an impact event. These gaps can range from 6 in. to a full barrier segment length of 12.5 ft. Longitudinal gaps between adjacent installations of PCB systems pose a serious safety concern for the errant motorist. Therefore, a need existed to develop a treatment capable of shielding the longitudinal gaps that occur between adjacent installations of PCB systems. In this research, design concepts for the gap-spanning hardware were conceived, and two design concepts were selected for further investigation and refinement through LS-DYNA computer simulation. Based on simulation results and input from the Midwest Pooled Fund Program member states, the design concept utilizing nested thrie-beam spanning the gap was chosen for full-scale crash testing under Manual for Assessing Safety Hardware 2016 (MASH 2016). Two tests were conducted to MASH test no. 3-11 to evaluate the length of need of the system, as well as the transition from the gap-spanning hardware to the PCBs. In both tests, the 2270P vehicle was contained and safely redirected. Recommendations are provided for system implementation and future installation with current PCB systems.

Keywords

infrastructure roadway design roadside safety design

Get full access to this article

View all access options for this article.

References

Keaton

J. R.

ArmorGuard™ Barrier. FHWA Letter to Barrier Systems, Inc., Rio Vista CA2001. https://safety.fhwa.dot.gov/roadway_dept/countermeasures/reduce_crash_severity/barriers/pdf/b87.pdf.

Denman

O. S.

ArmorGuard™ Barrier. Letter to Barrier Systems, Inc., Rio Vista, CA, 2008. https://safety.fhwa.dot.gov/roadway_dept/countermeasures/reduce_crash_severity/barriers/pdf/b173.pdf.

Endersby

R. M.

Talbot

J. E.

World Intellectual Property Organization No. WO 2007/148110 A1. World Intellectual Property Organization, Geneva, 2007.

Denman

O. S.

FHWA Acceptance of the BarrierGuard™ 800 System HSA-10/B-131. Letter to Barrier Systems Inc., FHWA, 2004. https://safety.fhwa.dot.gov/roadway_dept/countermeasures/reduce_crash_severity/barriers/pdf/b131.pdf.

Rice

G. E.

Jr.

FHWA Acceptance of the BarrierGuard™ 800 System. Letter to Barrier Systems Inc., FHWA, 2007. https://safety.fhwa.dot.gov/roadway_dept/countermeasures/reduce_crash_severity/barriers/pdf/b158.pdf.

Rice

G. E.

Jr.

FHWA Acceptance of the Vulcan Gate™ System. Letter to Energy Absorption Systems Inc., FHWA, 2007. https://safety.fhwa.dot.gov/roadway_dept/countermeasures/reduce_crash_severity/barriers/pdf/b134c.pdf.

Hotchkin

D. J.

U.S. Patent No. 8,393,822 B2. Patent and Trademark Office, Washington D.C., 2013.

Trinity Highway. Gates. Vulcan® Barrier. https://trinityhighway.com/wp-content/uploads/2019/04/Vulcan-Gate-4-19-19.pdf.

Trinity Highway. Vulcan® Gate. Product Description Assembly Manual. https://trinityhighway.com/wp-content/uploads/2020/02/610435-Vulcan-Gate.pdf.

10.

Ross

H. E.

Sicking

D. L.

Zimmer

R. A.

Michie

J. D.

NCHRP Report 350. Recommended Procedures for the Safety Performance Evaluation of Highway Features. Transportation Research Board, Washington, D.C., 1993.

11.

Van Kirk

J. L.

Stoughton

R. L.

Stoker

J. R.

Nordlin

E. F.

Vehicular Impact Test on Steel Channel-Beams Spanning a Gap in a Continuous Concrete Median Barrier. Report No. CA-TL-79-01. State of California Department of Transportation, 1979.

12.

Recommended Procedures for Vehicle Crash Testing of Highway Appurtenances . Transportation Research Circular 191. TRB, National Research Council, Washington, D.C., 1978.

13.

Office of Structures. Modular Joint System Multicell Miscellaneous Details. New York State Department of Transportation, 2009.

14.

Ranjha

S. A.

Asadollahi Pajouh

Bielenberg

R. W.

Rosenbaugh

S. K.

Faller

R. K.

Development of a PCB Steel Cover Plate for Large Open Joints – Phase I. Report No. TRP-03-387a-21. Midwest Roadside Safety Facility, University of Nebraska-Lincoln, Lincoln, 2021.

15.

American Association of State Highway and Transportation Officials. Manual for Assessing Safety Hardware, 2nd ed. Washington, D.C., AASHTO, 2016.

16.

Hallquist

J. O.

LS-DYNA Keyword User’s Manual. Livermore Software Technology Corporation, Livermore, CA, 2007.

17.

Bielenberg

R. W.

Faller

R. K.

Rohde

J. R.

Reid

J. D.

Sicking

D. L.

Holloway

J. C.

Development of Tie-Down and Transition Systems for Temporary Concrete Barrier on Asphalt Road Surfaces. Research Report No. TRP-03-180-06. Midwest Roadside Safety Facility, University of Nebraska-Lincoln, Lincoln, 2007.

18.

Bielenberg

R. W.

Quinn

T. E.

Faller

R. K.

Sicking

D. L.

Reid

J. D.

Development of a Retrofit, Low-Deflection, Temporary Concrete Barrier System. Research Report No. TRP 03-295-14. Midwest Roadside Safety Facility, University of Nebraska-Lincoln, Lincoln, 2014.

19.

Bielenberg

R. W.

Meyer

D. T.

Faller

R. K.

Reid

J. D.

Length of Need and Minimum System Length for F-Shape Portable Concrete Barrier. Research Report No. TRP-03-337-17. Midwest Roadside Safety Facility, University of Nebraska-Lincoln, Lincoln, 2017.

20.

Bielenberg

R. W.

Dynamic Component Testing of Potential Alternative Anchors for the F-Shape Concrete Barrier Steel Strap Tie-Down System. Report No. TRP-03-182-07. Midwest Roadside Safety Facility, University of Nebraska-Lincoln, Lincoln, 2007.

21.

Wiebelhaus

M. J.

Terpsma

R. J.

Lechtenberg

K. A.

Reid

J. D.

Faller

R. K.

Bielenberg

R. W.

Rohde

J. R.

Sicking

D. L.

Development of a Temporary Concrete Barrier to Permanent Concrete Median Barrier Approach Transition. Report No. TRP-03-208-10. Midwest Roadside Safety Facility, University of Nebraska-Lincoln, Lincoln, 2010.

22.

Polivka

K. A.

Faller

R. K.

Sicking

D. L.

Rohde

J. R.

Bielenberg

R. W.

Reid

J. D.

Coon

B. A.

Performance Evaluation of the Permanent New Jersey Safety Shape Barrier - Update to NCHRP 350 Test No. 3-10 (2214NJ-1). Report No. TRP-03-177-06. Midwest Roadside Safety Facility, University of Nebraska-Lincoln, Lincoln, 2006.

23.

Sheikh

N. M.

Menges

W. L.

Kuhn

D. L.

MASH TL-3 Testing and Evaluation of Free-Standing Portable Concrete Barrier. Test Report No. 607911-1&2. Texas A&M Transportation Institute, Texas A&M University, 2017.

24.

Polivka

K. A.

Faller

R. K.

Sicking

D. L.

Rohde

J. R.

Bielenberg

R. W.

Reid

J. D.

Coon

B. A.

Performance Evaluation of the Free-Standing Temporary Barrier - Update to NCHRP 350 Test No. 3-11 with 28” C.G. Height (2214TB-2). Report No. TRP-03-174-06. Midwest Roadside Safety Facility, University of Nebraska-Lincoln, Lincoln, 2006.

25.

Bickhaus

R. F.

Bielenberg

R. W.

Rosenbaugh

S. K.

Faller

R. K.

Ranjha

S. A.

Development of a PCB Steel Cover Plate for Large Open Joints – Phase II. Report No. TRP-03-387b-20. Midwest Roadside Safety Facility, University of Nebraska-Lincoln, Lincoln, 2020.