In this study, a three-dimensional (3D) mathematical model based on conduction heat transfer in a solid is developed to predict the temperature profile of large concrete elements during the hydration process at early ages. Four different concrete mix designs are tested in the laboratory and on site. Heat of hydration and activation energy of each concrete mix is determined in the laboratory and temperature dependent thermo-physical parameters are considered in the simulations. The transient 3D conduction heat transfer equation with a heat generation source term is discretized by using finite volume method. The mathematical model is validated with temperature-time histories measured from four 1.8 m cube concrete blocks that are cast on site. Results obtained from the 3D model show that variable thermal properties are considered to accurately predict the temperature gradients. According to the analysis, the numerical model demonstrates that it can produce accurate predictions for temperature analysis within the 1.8 m large concrete elements.
EmborgM.Computation of Thermal Stresses. In Prevention of Thermal Cracking in Concrete at Early Ages, Vol. 15 (SpringenschmidR., ed.), E. & F. N. Spon, London, 1998, pp. 178–230.
2.
ACI Committee 207. Guide to Mass Concrete. ACI 207.1R-05. American Concrete Institute, Farmington Hills, MI, 1997.
3.
StarkJ.BollmannK.Delayed Ettringite Formation in Concrete. Nordic Concrete Research, Vol. 23, 2000, pp. 4–28.
4.
CollepardiM.A State-of-the-Art Review on Delayed Ettringite Attack on Concrete. Cement & Concrete Composites, Vol. 25, No. 4–5, 2003, pp. 401–407.
5.
GajdaJ.Mass Concrete for Buildings and Bridges. Portland Cement Association, Skokie, IL, 2007.
6.
EmborgM.Models and Methods for Computation of Thermal Stresses. Rilem Report, E. & F. N. Spon, London, 1998, pp. 178–230.
7.
HanS.Assessment of Curing Schemes for Effectively Controlling Thermal Behavior of Mass Concrete Foundation at Early Ages. Construction and Building Materials, Vol. 230, 2020, p. 117004.
8.
MaruyamaI.LuraP.Properties of Early-Age Concrete Relevant to Cracking in Massive Concrete. Construction and Building Materials, Vol. 123, 2019, p. 105770. https://doi.org/10.1016/j.cemconres.2019.05.015.
9.
CarlsonR. W.A Simple Method for the Computation of Temperatures in Concrete Structures. American Concrete Institute, Vol. 34, 1937, pp. 89–102.
10.
ACI Committee 207. Report on Thermal and Volume Change Effects. American Concrete Institute, Farmington Hills, MI, 2007.
11.
BallimY.A Numerical Model and Associated Calorimeter for Predicting Temperature Profiles in Mass Concrete. Cement and Concrete Composites, Vol. 26, 2004, pp. 695–703. https://doi.org/10.1016/S0958-9465(03)00093-3.
12.
YikiciT. A.ChenH. L.Numerical Prediction Model for Temperature Development in Mass Concrete Structures. Transportation Research Record: Journal of the Transportation Research Board, 2015. 2508: 102–110.
13.
BobkoC. P.ZadehV. Z.SeracinoR.Improved Schmidt Method for Predicting Temperature Development in Mass Concrete. ACI Materials Journal, Vol. 112, No. 4, 2015, pp. 579–586. https://doi.org/10.14359/51687454.
14.
DoT. A.ChenH. L.LeonG.NguyenT. H.A Combined Finite Difference and Finite Element Model for Temperature and Stress Predictions of Cast-in-Place Cap Beam on Precast Columns. Construction and Building Materials, Vol. 217, 2019, pp. 172–184. https://doi.org/10.1016/j.conbuildmat.2019.05.019.
15.
RidingK. A.Early Age Concrete Thermal Stress Measurement and Modeling. PhD thesis, University of Texas, Austin, TX, 2007.
16.
SargamY.FaytarouniM.RidingK.WangK.JahrenC.ShenJ.Predicting Thermal Performance of a Mass Concrete Foundation – A Field Monitoring Case Study. Case Studies in Construction Materials, Vol. 11, 2019, p. e00289. https://doi.org/10.1016/j.cscm.2019.e00289.
17.
DoT. A.LawrenceA. M.TiaM.BerginM. J.Importance of Insulation at the Bottom of Mass Concrete Placed on Soil with High Groundwater. Transportation Research Record: Journal of the Transportation Research Board, 2013. 2342, pp. 113–120. https://doi.org/10.3141/2342-14.
18.
DoT. A.LawrenceA. M.TiaM.BerginM. J.Determination of Required Insulation for Preventing Early-Age Cracking in Mass Concrete Footings. Transportation Research Record: Journal of the Transportation Research Board, 2014. 2441, pp. 91–97. https://doi.org/10.3141/2441-12.
19.
HuangY.LiuG.HuangS.RaoR.HuC.Experimental and Finite Element Investigations on the Temperature Field of a Massive Bridge Pier Caused by the Hydration Heat of Concrete. Construction and Building Materials, Vol. 192, 2018, pp. 240–252. https://doi.org/10.1016/j.conbuildmat.2018.10.128.
20.
LinY.ChenH. L.Thermal Analysis and Adiabatic Calorimetry for Early-Age Concrete Members. Journal of Thermal Analysis and Calorimetry, Vol. 122, No. 2, 2015, pp. 937–945. https://doi.org/10.1007/s10973-015-4843-2.
KishiT.MaekawaK.Thermal and Mechanical Modelling of Young Concrete Based on Hydration Process of Multi-Component Cement Minerals. In Thermal Cracking in Concrete at Early Ages (SpringenschmidR., ed.), E. & F. N. Spon, London, 1994, pp. 11–18.
23.
SpringenschmidR.TCE1: Adiabatic and Semi-Adiabatic Calorimetry to Determine the Temperature Increase in Concrete due to Hydration Heat of the Cement. Materials and Structures, Vol. 30, No. 8, 1997, pp. 451–464. https://doi.org/10.1007/bf02524773.
24.
YikiciT. A.ChenR. H. L.2D Modeling Temperature Development of Mass Concrete Structures at Early Age. In Proc., High Tech Concrete: Where Technology and Engineering Meet (HordijkD.LukovićM., eds.), Springer, Cham, Switzerland, 2017, pp. 612–620.
25.
KimK.-H.JeonS.-E.KimJ.-K.YangS.An Experimental Study on Thermal Conductivity of Concrete. Cement and Concrete Research, Vol. 33, No. 3, 2003, pp. 363–371.
26.
BentzD. P.Transient Plane Source Measurements of the Thermal Properties of Hydrating Cement Pastes. Materials and Structures, Vol. 40, No. 10, 2007, p. 1073.
27.
De SchutterG.Finite Element Simulation of Thermal Cracking in Massive Hardening Concrete Elements Using Degree of Hydration Based Material Laws. Computers & Structures, Vol. 80, No. 27–30, 2002, pp. 2035–2042.
28.
De SchutterG.TaerweL.General Hydration Model for Portland Cement and Blast Furnace Slag Cement. Cement and Concrete Research, Vol. 25, No. 3, 1995, pp. 593–604. https://doi.org/10.1016/0008-8846(95)00048-H.
29.
Cengel YunusA.Heat Transfer: A Practical Approach. McGraw-Hill, New York, NY, 2002.
30.
MartinelliE.KoendersE. A. B.CaggianoA.A Numerical Recipe for Modelling Hydration and Heat Flow in Hardening Concrete. Cement & Concrete Composites, Vol. 40, 2013, pp. 48–58. https://doi.org/10.1016/j.cemconcomp.2013.04.004.
31.
CebulaA.TalerD.Finite Volume Method in Heat Conduction. In Encyclopedia of Thermal Stresses (HetnarskiR. B. ed.), Springer Netherlands, Dordrecht, 2014, pp. 1645–1658.
32.
SezerH.ArsavaK. S.RangwalaA. S.Oil Spill Clean-up Using Immersed Metal Wool. Journal of Environmental Chemical Engineering, Vol. 5, No. 5, 2017, pp. 5196–5206. https://doi.org/10.1016/j.jece.2017.09.052.
33.
PatankarS.Numerical Heat Transfer and Fluid Flow. CRC Press, Boca Raton, FL, 2018.
34.
YikiciT. A.Evaluating Thermal Behavior and Use of Maturity Method in Mass Concrete. PhD thesis, West Virginia University, Morgantown, WV, 2015. https://researchrepository.wvu.edu/etd/7007.
35.
SezerH.ArsavaK. S.KozhumalS. P.RangwalaA. S.The Effect of Embedded Objects on Pool Fire Burning Behavior. International Journal of Heat and Mass Transfer, Vol. 108, 2017, pp. 537–548. https://doi.org/10.1016/j.ijheatmasstransfer.2016.12.021.
YikiciT. A.ChenH.-L.Use of Maturity Method to Estimate Compressive Strength of Mass Concrete. Construction and Building Materials, Vol. 95, 2015, pp. 802–812. https://doi.org/10.1016/j.conbuildmat.2015.07.026.
