This study addresses the effects of recycled polyethylene (RPE) on the performances of both asphalt binders and asphalt mixtures. Whether using RPE in an asphalt mixture might leach harmful chemicals into rainwater or melted snow was also determined. Two processes, wet and dry, were used to formulate the RPE modified asphalt binders and mixtures. In the wet process, RPE was added to asphalt binder. In the dry process, it was added to heated aggregates. RPE from two sources and PG 64-22 virgin asphalt binders from two sources were used in this study. In conclusion, RPE improved the rutting resistance of the asphalt binders and asphalt mixtures. However, it had adverse effects on their resistance to intermediate-temperature and non-load associated cracking. The dry process could produce a mixture with a higher RPE dosage compared with the wet process using one virgin asphalt binder but not the other; thus, the virgin asphalt binder source was a significant factor for the dry process. Based on an embryotoxicity test, it was found that RPE can be used by the asphalt paving industry without creating any significant environmental risks.
WillisR.YinF.MoraesR.Recycled Plastic in Asphalt Part A: State of Knowledge. NAPA-IS-142. National Asphalt Pavement Association (NAPA), Greenbelt, MD, 2020.
2.
Environmental Protection Agency. Advancing Sustainable Materials Management: Facts and Figures 2016 and 2017. Assessing Trends in Material Generation, Recycling, Composting, Combustion with Energy Recovery and Landfilling in the United States. U.S. Environmental Protection Agency, Washington, D.C., 2019.
3.
Federal Highway Administration. FHWA 2020 EAR BAA Topic 3: Compatibilization of Waste Plastic to Enhance Mechanical Properties of Asphalt Cement. Federal Highway Administration, Washington, D.C., 2020. https://beta.sam.gov/opp/d513229cd42c4bb2904d804980cfa8e2/view.
4.
YinF.MoraesR.AnandA.Recycled Plastic in Asphalt Part B: Literature Review. NAPA-IS-142. National Asphalt Pavement Association, Greenbelt, MD, 2020.
5.
American Association of State Highway and Transportation Officials. AASHTO TP 113: Standard Method of Test for Determination of Asphalt Binder Resistance to Ductile Failure Using Double-Edge-Notched Tension (DENT) Test: Standard Specifications for Transportation Materials and Methods of Sampling and Testing. AASHTO, Washington, D.C., 2015.
6.
GibsonN.QiX.ShenoyA.Al-KhateebG.KutayM. E.AndriescuA.StuartK.YoutcheffJ.HarmanT.Performance Testing for Superpave and Structural Validation. No. FHWA-HRT-11-045. Federal Highway Administration, Washington, D.C., 2012.
7.
ZhouF.MogawerW.LiH.AndriescuA.CopelandA.Evaluation of Fatigue Tests for Characterizing Asphalt Binders. Journal of Materials in Civil Engineering, Vol. 25, No. 5, 2013, pp. 610–617.
8.
Ministry of Transportation of Ontario. LS-308: Method of Test for Determination of Performance Grade of Physically Aged Asphalt Cement Using Extended Bending Beam Rheometer (BBR) Method. MTO Laboratory Testing Manual. MTO Laboratory Testing Manual, Downsview, Ontario, 2015.
9.
HespS. A. M.GeninS. N.ScafeD.ShurvellH. F.SubramaniS.Five Year Performance Review of a Northern Ontario Pavement Trial: Validation of Ontario’s Double-Edge-Notched Tension (DENT) and Extended Bending Beam Rheometer (BBR) Test Methods. Proc., 54th Canadian Technical Asphalt Association Annual Conference, Moncton, New Brunswick, 2009, p. 99.
10.
Asphalt Institute Technical Advisory Committee. State-of-the-Knowledge: Use of the Delta Tc Parameter to Characterize Asphalt Binder Behavior. Technical Document. Asphalt Institute, Lexington, KY, 2019.
11.
AndersonD. A.ChristensenD. W.BahiaH.Physical Properties of Asphalt Cement and the Development of Performance-Related Specifications. Journal of the Association of Asphalt Paving Technologists, Vol. 60, 1991, pp. 437–475.
12.
AndersonR. M.KingG. N.HansonD. I.BlankenshipP. B.Evaluation of the Relationship between Asphalt Binder Properties and Non-Load Related Cracking. Journal of the Association of Asphalt Paving Technologists, Vol. 80, 2011, pp. 615–664.
13.
MogawerW. S.BennertT.AustermanA.EricsonC.AAPT Symposium: Investigating the Aging Mitigation Capabilities of Rejuvenators in High RAP Mixtures Using Black Space Diagrams, Binder Rheology and Mixture Tests. Asphalt Paving Technology: Association of Asphalt Paving Technologists-Proceedings of the Technical Sessions, Vol. 84, 2015, pp. 705–738.
14.
MogawerW. S.AustermanA.Al-QadiI. L.ButtlarW.OzerH.HillB.Using Binder and Mixture Space Diagrams to Evaluate the Effect of Re-Refined Engine Oil Bottoms on Binders and Mixtures after Ageing. Road Materials and Pavement Design, Vol. 18, Supplement 1, 2017, pp. 154–182.
15.
RoweG.Analysis of SHRP Core Asphalts—New 2013/14 Test Results. Proc., Binder Expert Task Group Meeting, San Antonio, TX, 2014, pp. 1–2.
16.
BooshehrianA.MogawerW. S.BonaquistR.How to Construct an Asphalt Binder Master Curve and Assess the Degree of Blending between RAP and Virgin Binders. Journal of Materials in Civil Engineering, Vol. 25, No. 12, 2013, pp. 1813–1821.
17.
American Association of State Highway and Transportation Officials. AASHTO M323: Standard Specification for Superpave Volumetric Mix Design: Standard Specifications for Transportation Materials and Methods of Sampling and Testing. AASHTO, Washington, D.C., 2017.
18.
American Association of State Highway and Transportation Officials. AASHTO R35: Standard Practice for Superpave Volumetric Design for Asphalt Mixtures: Standard Specifications for Transportation Materials and Methods of Sampling and Testing. AASHTO, Washington, D.C., 2017.
19.
American Association of State Highway and Transportation Officials. AASHTO T316: Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer: Standard Specifications for Transportation Materials and Methods of Sampling and Testing. AASHTO, Washington, D.C., 2019.
20.
American Association of State Highway and Transportation Officials. AASHTO R 30: Standard Practice for Mixture Conditioning of Hot Mix Asphalt (HMA): Standard Specifications for Transportation Materials and Methods of Sampling and Testing. AASHTO, Washington, D.C., 2019.
21.
KimY. R.CastorenaC.ElwardanyM. D.RadF. Y.UnderwoodS.AkshayG.GudipudiP.FarrarM. J.GlaserR. R.Long-Term Aging of Asphalt Mixtures for Performance Testing and Prediction. NCHRP Research Report. Transportation Research Board, Washington, D.C., 2018.
22.
American Society for Testing and Materials. ASTM D8225-19: Standard Test Method for Determination of Cracking Tolerance Index of Asphalt Mixture Using the Indirect Tensile Cracking Test at Intermediate Temperature. ASTM International, West Conshohocken, PA, 2019.
23.
ZhouF.Development of an IDEAL Cracking Test for Asphalt Mix Design, Quality Control and Quality Assurance. NCHRP-IDEA Program Project Final Report: 195. Transportation Research Board, Washington, D.C., 2019.
24.
ZhouF.ImS.SunL.ScullionT.Development of an IDEAL Cracking Test for Asphalt Mix Design and QC/QA.Road Materials and Pavement Design, Vol. 18, Supplement 4, 2017, pp. 405–427.
25.
American Association of State Highway and Transportation Officials. AASHTO TP 124: Provisional Standard Method of Test for Determining the Fracture Potential of Asphalt Mixtures Using Semicircular Bend Geometry (SCB) at Intermediate Temperature: Standard Specifications for Transportation Materials and Methods of Sampling and Testing. AASHTO, Washington, D.C., 2020.
26.
DonaldW. C.Jr.SolimanA. A.Relationship between Asphalt Concrete Flexibility Index and Binder Rheological Properties. Association of Asphalt Paving Technologists, Lino Lakes, MN, 2020.
27.
American Society for Testing and Materials. ASTM D7313-20: Standard Test Method for Determining Fracture Energy of Asphalt Mixtures Using the Disk-Shaped Compact Tension Geometry. ASTM International, West Conshohocken, PA, 2020.
28.
American Association of State Highway and Transportation Officials. AASHTO T 324: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures:Standard Specifications for Transportation Materials and Methods of Sampling and Testing. AASHTO, Washington, D.C., 2019.
29.
American Association of State Highway and Transportation Officials. AASHTO T 378: Standard Method of Test for Determining the Dynamic Modulus and Flow Number for Asphalt Mixtures Using the Asphalt Mixture Performance Tester (AMPT):Standard Specifications for Transportation Materials and Methods of Sampling and Testing. AASHTO, Washington, D.C., 2017.
ChahardehiA. M.ArsadH.LimV.Zebrafish as a Successful Animal Model for Screening Toxicity of Medicinal Plants. Plants, Vol. 9, No. 10, 2020, p. 1345.
32.
de OliveiraJ. P. J.EstrelaF. N.de Lima RodriguesA. S.GuimarãesA. T. B.RochaT. L.MalafaiaG.Behavioral and Biochemical Consequences of Danio Rerio Larvae Exposure to Polylactic Acid Bioplastic. Journal of Hazardous Materials, Vol. 404, 2021, p. 124152.
33.
AltenhofenS.WiprichM. T.NeryL. R.LeiteC. E.ViannaM. R.BonanC. D.Manganese (II) Chloride Alters Behavioral and Neurochemical Parameters in Larvae and Adult Zebrafish. Aquatic Toxicology, Vol. 182, 2017, pp. 172–183.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
