A pour-back is a critical component of a post-tensioned concrete system, affecting its durability by protecting anchorages and vents from corrosion. However, the material interface between the grout pour-back and the concrete member may serve as an accelerated pathway for chloride ion intrusion and may lead to premature corrosion of post-tensioning components. This study evaluates the vulnerability of concrete–grout interfaces through two experimental protocols: a novel electrical migration test and the standard electrical resistivity test. The results are used to predict the service life of pour-back systems using a concrete life-cycle assessment model. This research serves as a first step toward defining the chloride permeability of concrete–grout interfaces.
HarttW. H.VenugopalanS.Corrosion Evaluation of Post-Tensioned Tendons on the Mid Bay Bridge in Destin, Florida. Florida Department of Transportation, Tallahassee, FL, 2002.
3.
Post Tensioning Institute. PTM: Post Tensioning Manual - Sixth Edition. Technical Documents. American Concrete Institute, Farmington Hills, Michigan, MI, 2006.
BasheerL.KroppJ.ClelandD. J.Assessment of the Durability of Concrete from Its Permeation Properties: A Review. Construction and Building Materials, Vol. 15, No. 2–3, 2001, pp. 93–103.
6.
GlassG. K.BuenfeldN. R.The Presentation of the Chloride Threshold Level for Corrosion of Steel in Concrete. Corrosion Science, Vol. 39, No. 5, 1997, pp. 1001–1013.
7.
ThomasM. D. A.BamforthP. B.Modelling Chloride Diffusion in Concrete: Effect of Fly Ash and Slag. Cement and Concrete Research, Vol. 29, No. 4, 1999, pp. 487–495.
SongH. W.LeeC. H.AnnK. Y.Factors Influencing Chloride Transport in Concrete Structures Exposed to Marine Environments. Cement and Concrete Composites, Vol. 30, No. 2, 2008, pp. 113–121.
10.
LupingT.GulikersJ.On the Mathematics of Time-Dependent Apparent Chloride Diffusion Coefficient in Concrete. Cement and Concrete Research, Vol. 37, No. 4, 2007, pp. 589–595.
11.
ChatterjiS.On the Applicability of Fick’s Second Law to Chloride Ion Migration through Portland Cement Concrete. Cement and Concrete Research, Vol. 25, No. 2, 1995, pp. 299–303.
12.
LupingT.NilssonL. O.Rapid Determination of the Chloride Diffusivity in Concrete by Applying an Electrical Field. ACI Materials Journal, Vol. 89, No. 1, 1992, pp. 40–53.
13.
KonečnýP.LehnerP.PonikiewskiT.MieraP.Comparison of Chloride Diffusion Coefficient Evaluation Based on Electrochemical Methods. Procedia Engineering, Vol. 190, 2017, pp. 193–198.
14.
BuenfeldN. R.GlassG. K.HassaneinA. M.ZhangJ. Z.Chloride Transport in Concrete Subjected to Electric Field. Journal of Materials in Civil Engineering, Vol. 10, No. 4, 1998, pp. 220–228.
15.
LuX.Application of the Nernst-Einstein Equation to Concrete. Cement and Concrete Research, Vol. 27, No. 2, 1997, pp. 293–302.
16.
AndradeC.CastelloteM.AlonsoC.GonzálezC.Relation between Colourimetric Chloride Penetration Depth and Charge Passed in Migration Tests of the Type of Standard ASTM C1202-91. Cement and Concrete Research, Vol. 29, No. 3, 1999, pp. 417–421.
17.
RidingK. A.Early Age Concrete Thermal Stress Measurement and Modeling. PhD dissertation. The University of Texas, Austin, TX, 2007.
18.
BurrisL. E.RidingK. A.Diffusivity of Binary and Ternary Concrete Mixture Blends. ACI Materials Journal, Vol. 111, No. 4, 2014, pp. 373–382.
19.
NordTest. NT Build 355: Chloride Diffusion Coefficient from Migration Cell Experiments. Nord Build, Finland, 1997, pp. 1–4.
20.
NordTest. NT Build 492: Concrete, Mortar and Cement-Based Repair Materials: Chloride Migration Coefficient from Non-Steady-State Migration Experiments. Nord Build, Finland, 1999, pp. 1–8.
21.
LupingT.SørensenH. E.Evaluation of the Rapid Test Methods for Measuring the Chloride Diffusion Coefficients of Concrete. Materials and Structures, Vol. 34, No. 242, 2001, pp. 479–485.
22.
TanesiJ.ArdaniA.Surface Resistivity Test Evaluation as an Indicator of the Chloride Permeability of Concrete. FHWA TechBrief, McLean, VA, 2012, pp. 1–6.
23.
AASHTO. AASTHO T 358: Standard Method of Test for Surface Resistivity Indication of Concrete’s Ability to Resist Chloride Ion Penetration. AASHTO Standard Test Methods, Washington, D.C., 2017.
24.
ASTM. ASTM C1760: Standard Test Method for Bulk Electrical Conductivity of Hardened Concrete. ASTM International, West Conshohocken, PA, 2019.
25.
AngstU. M.ElsenerB.On the Applicability of the Wenner Method for Resistivity Measurements of Concrete. ACI Materials Journal, Vol. 111, No. 6, 2014, pp. 661–672.
26.
SalehiM.GhodsP.IsgorO. B.Numerical Investigation of the Role of Embedded Reinforcement Mesh on Electrical Resistivity Measurements of Concrete using the Wenner Probe Technique. Materials and Structures, Vol. 49, No. 1–2, 2016, pp. 301–316. http://dx.doi.org/10.1617/s11527-014-0498-x.
27.
MeckE.SirivivatnanonV.Field Indicator of Chloride Penetration Depth. Cement and Concrete Research, Vol. 33, No. 8, 2003, pp. 1113–1117.
28.
OtsukiN.NagatakiS.NakashitaK.Evaluation of the AgNO3 Solution Spray Method for Measurement of Chloride Penetration into Hardened Cementitious Matrix Materials. Construction and Building Materials, Vol. 7, No. 4, 1993, pp. 195–201.
29.
ColbertB. Susceptibility of Venting Systems in Post-Tensioned Bridges to Chloride Intrusion. Masters thesis. The Ohio State University, Columbus, OH, 2019.
LeemannA.LoserR.MünchB.Influence of Cement Type on ITZ Porosity and Chloride Resistance of Self-Compacting Concrete. Cement and Concrete Composites, Vol. 32, No. 2, 2010, pp. 116–120. http://dx.doi.org/10.1016/j.cemconcomp.2009.11.007.
32.
WuK.LongJ.XuL.De SchutterG.A Study on the Chloride Diffusion Behavior of Blended Cement Concrete in Relation to Aggregate and ITZ. Construction and Building Materials, Vol. 223, 2019, pp. 1063–1073. https://doi.org/10.1016/j.conbuildmat.2019.07.068.
