Laboratory Investigation of the Performance Evaluation of Fiber-Modified Asphalt Mixes in Cold Regions

Abstract

Thermal cracking of pavement is caused by contraction of the asphalt layer at low temperatures, when tensile stresses build up to a critical point at which a crack is formed. The cracks formed then propagate under traffic loading conditions. Freeze-thaw cycles accelerate crack propagation and deterioration of the asphalt layer, and can also lead to the formation of more severe distresses such as potholes. Fibers have attracted increasing attention in the asphalt industry for use as asphalt concrete modifiers. The addition of fibers to hot mix asphalt (HMA) results in a composite material that has a higher tensile strength, along with the ability to absorb greater energy during the fracture process. The fibers within the material also act as a barrier preventing the formation and propagation of cracks in the asphalt mix. This research evaluates the effectiveness of adding polymer fibers to HMA to increase both its resistance to cracking at intermediate and low temperatures, and its rutting resistance and moisture susceptibility at high temperatures. For this purpose, three different types of polymer fibers: aramids, polyethylene terephthalate (PET), and polyacrylonitrile (PAN), were added to conventional HMA mixes. The resulting samples were compacted, and their mechanical properties were compared with conventional HMA in the laboratory. At the end of the paper, a material cost comparison is provided as a reliable source of information when selecting materials to fulfill minimum industry specifications.