Soil Parameters for Design with the 3D PLAXIS Hardening Soil Model

Abstract

The design and analysis of buried structures presents difficulties that cannot often be solved by closed-form solutions. Finite element methods (FEM) have increasingly become the tool of choice for advanced soil-structure interaction analysis, with three-dimensional FEM being required for irregular non-plane-strain cases. To accurately capture the stress and deformation of soils, complex material constitutive models are required. Several input parameters to these models must be determined from expensive soil testing, which is impractical for most applications. For two-dimensional FEM, good approximations of these parameters for a wide range of placed backfill soils have been developed and used in practice for many years in the computer program CANDE. It is the purpose of this paper to take these parameters, developed by Selig for use in CANDE, and convert them to equivalent parameters for the three-dimensional PLAXIS computer program’s Hardening Soil model.

Get full access to this article

View all access options for this article.

References

Kondner

R. L.

A Hyperbolic Stress Strain Formulation for Sands. Proc., 2nd Pan American Conference on Soil Mechanics and Foundation Engineering, Brazil, Vol. 1, 1963, pp. 289–324.

Duncan

J. M.

Chang

C. Y.

Nonlinear Analysis of Stress and Strain in Soils. Journal of the Soil Mechanics and Foundations Division, Vol. 96, No. SM5, 1970, pp. 1629–1653.

Selig

E. T.

Soil Parameters for Design of Buried Pipelines. Proc., Pipeline Infrastructure Conference, ASCE, University of Massachusetts, Amherst, 1988, pp. 99–116.

Katona

M. G.

Smith

J. M.

Odello

R. S.

Allgood

J. R.

CANDE – A Modern Approach for Structural Design and Analysis of Buried Culverts. Publication FHWA-RD-77-5. FHWA, Naval Civil Engineering Laboratory, Washington, D.C., 1976.

Katona

M. G.

Mlynarski

McGrath

T. J.

CANDE-2007 Culvert Analysis and Design Solution Methods and Formulations. Publication NCHRP 15-28. U.S. Department of Transportation, Washington, D.C., 2008.

PLAXIS 3D [Computer Software] . https://www.plaxis.com. Accessed 29 July 2018.

Schanz

Vermeer

P. A.

Bonnier

P. G.

The Hardening Soil Model: Formulation and Verification. Presented at Beyond 2000 in Computational Geotechnics – 10 Years of PLAXIS, Balkema, Rotterdam, 1999.

Duncan

J. M.

Byrne

Wong

K. S.

Mabry

Strength, Stress-Strain, and Bulk Modulus Parameters for Finite Element Analyses of Stresses and Movements in Soil Masses. Report No. UCB/GT/80-01. University of California, Berkeley, 1980.

Katona

M. G.

Modifying Duncan-Selig Soil Model for Plastic-Like Behavior. Transportation Research Record: Journal of the Transportation Research Board, 2015. 2511: 53–62.

10.

Bolton

M. D.

The Strength Dilatancy of Sands. Géotechnique, Vol. 36, No. 1, 1986, pp. 65–78.