Segmental retaining walls (SRWs) constructed of dry-cast concrete masonry units are used in transportation-related applications for which freeze-thaw (FT) durability is evaluated on the basis of percent mass-loss accumulated after multiple FT cycles as per ASTM C1262. This study compared mass loss, mass gain owing to absorption during (FT) exposure, and relative dynamic modulus (RDM) as per ASTM C215. Application of RDM required accounting for the influence of the shape and moisture content of SRW coupons on resonant frequency, with corrections that are likewise applicable to ASTM C666 for ordinary concrete. It was demonstrated that mass loss does not exclusively indicate surface damage, and the relationship between mass loss and RDM is unique to each specimen. Mass gain (as moisture absorption) during testing emerged as a key index of damage, with rapid escalation of mass loss and reduction in RDM at the number of FT cycles required to increase the moisture content of the residual coupon by about 1%.
Get full access to this article
View all access options for this article.
References
1.
ChanC. T.HoverK. C.FolliardK.TrejoD.Frost Durability Indexes of Segmental Retaining Wall Units. ACI Materials Journal, Vol. 104, No. 1, 2007, pp. 23–32.
2.
CarletonE.Top 10 Facts about Dry-Cast Concrete, Precast Inc. Magazine, Vol. 11, No. 5, September–October2015, pp. 6–10.
3.
Service d’Expertise en Matériaux Inc. Frost Durability of Roller-Compacted Concrete Pavements. RD135. Portland Cement Association, Skokie, IL, 2004, p. 148.
4.
American Society for Testing and Materials. Standard Specification for Dry-Cast Segmental Retaining Wall Units. ASTM C 1372-17. https://doi.org/10.1520/C1372-17.
5.
American Society for Testing and Materials. Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units. ASTM C 1262-10. https://doi.org/10.1520/C1262_C1262M-16.
6.
American Society for Testing and Materials. Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens. ASTM C215-14. https://doi.org/10.1520/C0215-14.
7.
NevilleA. M.Properties of Concrete, 4th ed.Wiley, New York, 1996, p. 556.
8.
American Society for Testing and Materials. Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing. ASTM C 666-15. https://doi.org/10.1520/C0666_C0666M-15.
9.
JanssenD. J.SetzerM. J.SnyderM. B., eds. Frost Damage in Concrete. In Proceedings of the International RILEM Workshop. RILEM Publication PRO 25, Minneapolis, MN, 28–30 June 1999.
10.
SetzerM. J.AubergR.HeckH.-J., eds. Frost Resistance of Concrete. In Proceedings of the International RILEM Workshop. RILEM Publication PRO 24, Essen, Germany, 18–19 April 2002.
11.
YangZ.WeissW. J.OlekJ.Water Transport in Concrete Damaged by Tensile Loading and Freeze–Thaw Cycling. Journal of Materials in Civil Engineering, Vol. 18, No. 32006, pp. 424–434.
12.
American Society for Testing and Materials. Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals. ASTM C672/C672M-12. https://doi.org/10.1520/C0672_C0672M-12.
13.
American Society for Testing and Materials. Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units. ASTM C140-10. https://doi.org/10.1520/C0140-10.
14.
ChanC. T.CarinoS. J.DurhamM.HoverK. C.Fundamental Frequency Testing of Segmental Retaining Wall (SRW) Specimens: Test Considerations. Journal of ASTM International, Vol. 4, No. 2, 2007, p. 14.
15.
JanssenD. J.SnyderM. B.SHRP-C-391 Report: Resistance of Concrete to Freezing and Thawing. Strategic Highway Research Program, National Research Council, Washington, D.C., 1994.
16.
HanceR. M.Studies of the Frost Resistance of Segmental Retaining Wall Units. Master’s thesis. Department of Civil and Environmental Engineering, Cornell University, 2005.
17.
American Society for Testing and Materials. Standard Test Method for Density, Absorption, and Voids in Hardened Concrete. ASTM C642-13. https://doi.org/10.1520/C0642-13.
18.
ChanC. T.HoverK. C.Study of ASTM C 1262 Test Variations and Damage Evaluation. National Concrete Masonry Association Education and Research Foundation, Herndon, VA, 2009, pp. 216
19.
FagerlundG.The Significance of Critical Degrees of Saturation at Freezing of Porous and Brittle Materials. ACI Special Publication, SP-47. American Concrete Institute, Detroit, MI, 1975, pp. 13–65.
20.
FagerlundG.An Introduction to RILEM Methods of Testing Resistance of Concrete to Freezing and Thawing and the International Cooperative Tests on the Critical Degree of Saturation Method. Materials and Structures, Vol. 10, No. 58, 1977, pp. 217–230.
21.
FagerlundG.Service Life with Regard to Frost Attack. A Probabilistic Approach. In 8th International Conference on Durability of Building Materials and Components, 30 May–3 June 1999, Vancouver, BC, Canada.
22.
ChanC.HoverK. C.FolliardK. J.Spatial Variations in Material Properties of Segmental Retaining Wall (SRW) Units, Part I: Observed Variations. Journal of ASTM International, Civil Engineering and Building Materials, Vol. 2, No. 2, 2005, pp. 1–17.
23.
ChanC.HoverK. C.FolliardK. J.Spatial Variations in Material Properties of Segmental Retaining Wall (SRW) Units, Part II: Sampling Considerations for Absorption Tests. Journal of ASTM International, Civil Engineering and Building Materials, Vol. 2, No. 2, 2005, pp. 1–18.
24.
ChanC.HoverK. C.FolliardK. J.HanceR. M.TrejoD.Durability of Segmental Retaining Wall Blocks. Final Report No. FHWA HRT-07-021. Federal Highway Administration Report. 2007, pp. 42–55. http://www.tfhrc.gov/structur/pubs/07021/index.htm.
25.
HoverK. C.ChunA. L.The Influence of Within-Tolerance Variations of Freeze-Thaw Cycle on the Results of ASTM C 1262. Final Report, National Concrete Masonry Association Education and Research Foundation, Herndon, VA, 2015, pp. 107.
