Tie-Downs and Transitions for Temporary Concrete Barriers

Abstract

Temporary concrete barriers are one of the most common types of roadside hardware found on the nation's highways. However, unresolved issues exist for some installations. These issues include the need for a tie-down system for barrier installations placed on asphalt roadway surfaces and an approach transition between temporary concrete barriers and rigid barriers. The objective of this research was to design a tie-down temporary barrier for use on asphalt road surfaces and then apply that tie-down system to the design of an approach transition from freestanding to rigid barriers. The tie-down and transition systems were to be evaluated according to Test Level 3 safety performance criteria set forth in NCHRP Report No. 350. For the asphalt tie-down system, three steel pins were installed in holes on the front face of the barrier. The new tie-down design was crash tested according to NCHRP Report No. 350 Test Designation 3-11. The test was judged acceptable, barrier deflections were reduced, and all barriers in the system were safely restrained. The approach transition to rigid barrier was developed through strategic application of the previously designed asphalt tie-downs. Computer simulation with LS-DYNA was used to locate the critical impact point for the full-scale crash test. The system was tested according to NCHRP Report No. 350 Test Designation 3-21. Results show that the vehicle was safely redirected, and the test was judged acceptable. Recommendations concerning the application of both the tie-down and transition designs are given.

Get full access to this article

View all access options for this article.

References

Bielenberg

B. W.

Faller

R. K.

Reid

J. D.

Holloway

J. C.

Rohde

J. R.

and Sicking

D. L.

. Development of a Tie-Down System for Temporary Concrete Barriers. Final Report to the Midwest States Regional Pooled Fund. Report No. TRP-03-115-02. Midwest Roadside Safety Facility, University of Nebraska–Lincoln, June 2002.

Bielenberg

B. W.

Faller

R. K.

Reid

J. D.

Rohde

J. R.

and Sicking

D. L.

. Design and Testing of Tie-Down Systems for Temporary Barriers. In Transportation Research Record: Journal of the Transportation Research Board, No. 1851, Transportation Research Board of the National Academies, Washington, D.C., 2003, pp. 83–94.

Polivka

K. A.

Faller

R. K.

Rohde

J. R.

Holloway

J. C.

Bielenberg

B. W.

and Sicking

D. L.

. Development and Evaluation of a Tie-Down System for the Redesigned F-Shape Concrete Temporary Barrier. Final Report to the Midwest State's Regional Pooled Fund Program. Transportation Research Report No. TRP-03-134-03. Project No. SPR-3(017)-Year 13. Midwest Roadside Safety Facility, University of Nebraska–Lincoln, Aug. 22, 2003.

Ross

H. E.

Sicking

D. L.

Zimmer

R. A.

and Michie

J. D.

. NCHRP Report No. 350: Recommended Procedures for the Safety Performance Evaluation of Highway Features. Transportation Research Board of the National Academies, Washington, D.C., 1993.

Jewel

Weldon

and Peter

. Compliance Crash Testing of K-Rail Used in Semi-Permanent Installations. Report No. 59-680838. Division of Materials Engineering and Testing Services, Caltrans, Sacramento, Calif., Oct. 1999.

Bronstad

M. E.

Calcote

L. R.

and Kimball

C. E.

Jr . Concrete Median Barrier Research—Vol. 2 Research Report. Report No. FHWA-RD-77-4. Submitted to the Offices of Research and Development, FHWA. Performed by Southwest Research Institute, San Antonio, Tex., March 1976.

Buth

C. E.

Campise

W. L.

Griffin

L. I.

III Love

M. L.

and Sicking

D. L.

. Performance Limits of Longitudinal Barrier Systems—Volume I: Summary Report. FHWA-RD-86-153. Final Report to Office of Safety and Traffic Operations R&D, FHWA. Performed by Texas Transportation Institute, Texas A&M University, College Station, May 1986.

Fortuniewicz

J. S.

Bryden

J. E.

and Phillips

R. G.

. Crash Tests of Portable Concrete Median Barrier for Maintenance Zones. Report No. FHWA-NY-RR-82-102. Final Report to Office of Research, Development, and Technology, FHWA. Performed by Engineering Research and Development Bureau, New York State Department of Transportation, Dec. 1982.

Mak

K. K.

and Sicking

D. L.

. Rollover Caused by Concrete Safety Shape Barrier—Volume I: Technical Report and Volume II: Appendices. Report No. FHWA-RD-88-219/220. Performed for the Office of Safety and Traffic Operations R&D, FHWA. Performed by Texas Transportation Institute, Texas A&M University, College Station, Jan. 1989.

10.

Buth

C. E.

Hirsch

T. J.

and McDevitt

C. F.

. Performance Level 2 Bridge Railings. In Transportation Research Record 1258, TRB, National Research Council, Washington, D.C., 1990, pp. 32–50.

11.

Halquist

J. O.

LS-DYNA Keyword Users Manual: Version 940. Livermore Software Technology Corporation, Livermore, Calif., June 1997.

12.

Faller

R. K.

Rohde

J. R.

Rosson

B. T.

Smith

R. P.

and Addink

K. H.

. Development of a TL-3 F-Shape Temporary Concrete Median Barrier. Report No. TRP-03-64-96. Midwest Roadside Safety Facility, University of Nebraska–Lincoln, Dec. 1996.

13.

Polivka

K. A.

Bielenberg

B. W.

Faller

R. K.

Reid

J. D.

Holloway

J. C.

Rohde

J. R.

and Sicking

D. L.

. Development of a Steel H-Section Temporary Barrier for Use in Limited Deflection Applications. In Progress Report to the Midwest States Regional Pooled Fund. Report No. TRP-03-120-02. Midwest Roadside Safety Facility, University of Nebraska–Lincoln, Aug. 2002.

14.

Post

E. R.

Faller

R. K.

Pfeifer

B. G.

and Holloway

J. C.

. Full-Scale Vehicle Crash Test on the Iowa Steel Temporary Barrier Rail. Report No. TRP-03-20-89. Midwest Roadside Safety Facility, University of Nebraska–Lincoln, Dec. 1989.