Analysis and Instrumentation of a Steel Bridge for Investigation of Superload Effects

Abstract

The number of superload trucks, which often carry loads three to 15 times those of common design vehicles, has increased in recent years. The increased frequency of occurrence has prompted concerns about the ability of highway bridges to accommodate such loads and remain in serviceable condition. To address these concerns, an analysis of effects of superloads has been conducted for a case study bridge. A detailed finite element (FE) model of the bridge, including all primary and secondary members, was created to evaluate the behavior. The FE analysis results were compared with results from a controlled load test of the bridge. The girder distribution factors determined experimentally and analytically were found to be significantly lower than comparable design values. Furthermore, from the load tests, the rotational restraint at the girder ends due to the abutments was determined to be as high as a fixed support. The FE model was then used to predict the effects of various superload trucks. The analysis results and field data suggest that some of the stiffener plates and cross-frame members of the analyzed bridge would be overstressed by certain superload truck configurations.

Get full access to this article

View all access options for this article.

References

Doing Business with INDOT: Permits. INDOT Oversize and/or Overweight Superload Permits. Indiana Department of Transportation, Indianapolis. www.in.gov/dot/business/permits/superl.html. Accessed July 28, 2005.

, and Hag-Elsafi

. Vehicular Overloads: Load Model, Bridge Safety, and Permit Checking. Journal of Bridge Engineering, Vol. 5, No. 1, 2000, pp. 49–57.

Wood

S. M.

Effects of Superload Trucks on a Steel Girder Highway Bridge. MS thesis. Purdue University, West Lafayette, Ind., 2004.

Duncan

M. A. G.

Superloads on Highway Bridges in Southern Africa.

Journal of the Structural Division, Vol. 103, No. ST11, 1977, pp. 2165–2179.

Kostem

C. N.

Overloading of Highway Bridges: Initiation of Deck Damage. In Transportation Research Record 664, TRB, National Research Council, Washington, D.C., 1978, pp. 212–220.

Turer

, and Aktan

E. A.

. Issues in Superload Crossing of Three Steel Girder Bridges in Toledo, Ohio. In Transportation Research Record 1688, TRB, National Research Council, Washington, D.C., 1999, pp. 87–96.

LRFD Bridge Design Specifications, 3rd ed. AASHTO, Washington, D.C., 2004.

Standard Specifications for Highway Bridges, 16th ed. AASHTO, Washington, D.C., 1996.

Structural Design. In Design Manual, Indiana Department of Transportation, Indianapolis, 2005, Part 6, Ch. 60.

10.

SAP2000 User's Manual, Version 7.44. Computers and Structures, Inc., Berkeley, Calif., 2001.

11.

Akinci

N. O.

, Liu

, and Bowman

M. D.

. Effects of Parapets on Live-Load Response of Steel Bridges Subjected to Superloads. Presented at 84th Annual Meeting of the Transportation Research Board, Washington, D.C., 2005.

12.

Eamon

C. D.

, and Nowak

A. S.

. Effects of Edge-Stiffening Elements and Diaphragms on Bridge Resistance and Load Distribution. Journal of Bridge Engineering, Vol. 7, No. 5, 2002, pp. 258–266.

13.

Traffic Monitoring Guide, 3rd ed. FHWA, U.S. Department of Transportation, 1995.