Micromechanical Analyses for Measurement and Prediction of Hot-Mix Asphalt Fracture Energy

Abstract

A verification of fracture energy density is presented as a fundamental fracture threshold in hot-mix asphalt. Fracture energy density was evaluated with the semicircular bending (SCB) test. Experimental analyses were enhanced by a digital image correlation system capable of providing a dense and accurate displacement–strain field of composite materials at the microstructural level and suitable for describing the cracking behavior of materials at crack initiation. The resulting fracture behavior in the SCB was predicted with a displacement discontinuity method to explicitly model the microstructure of asphalt mixtures and to predict their fracture energy density. The input parameters for the displacement discontinuity micromechanical model of the SCB were obtained from the Superpave^® indirect tensile test. The predicted crack initiation and crack propagation patterns are consistent with observed cracking behavior. The results also imply that fracture in mixtures can be modeled effectively with a micromechanical approach that allows for crack growth both along aggregate surfaces and through aggregates. Finally, the results presented lead to the promising statement that fracture energy density for mixtures is a fundamental fracture threshold and can be both consistently measured and predicted for different laboratory test configurations.

Get full access to this article

View all access options for this article.

References

Zhang

Roque

Birgisson

and Sangpetngam

. Identification and Verification of a Suitable Crack Growth Law. In Proc., Association of Asphalt Paving Technologists, Vol. 70, 2001, pp. 206–241.

Roncella

Romeo

and Forlani

. Image Based Microstructural Analysis in Fracture Mechanics. Presented at the 7th Conference on Optical 3-D Measurement Techniques, Vienna, Austria, 2005.

Romeo

Roncella

and Tebaldi

. Image-Based Method for Indirect Strain Measurement in Nonhomogeneous Materials. Proc., 22nd DANUBIA-ADRIA Symposium on Experimental Methods in Solid Mechanics, Monticelli, Italy, 2005.

Napier

J. A. L.

Modeling of Fracturing near Deep Level Gold Mine Excavations Using a Displacement Discontinuity Approach. In Proc., 2nd International Conference on Mechanics of Jointed and Faulted Rock ( Rossmanith

H.-P.

, ed.), Balkema, Rotterdam, Netherlands, 1990, pp. 709–715.

Birgisson

Soranakom

Napier

J. A. L.

and Roque

. Microstructure and Fracture in Asphalt Mixtures Using a Boundary Element Approach. Journal of Civil Engineering Materials, Vol. 16, No. 2 2004, pp. 116–121.

Birgisson

Soranakom

Napier

J. A. L.

and Roque

. Simulation of Fracture Initiation in Hot-Mix Asphalt Mixtures. In Transportation Research Record: Journal of the Transportation Research Board, No. 1849, Transportation Research Board of the National Academies, Washington, D.C., 2003, pp. 183–190.

Roque

and Buttlar

W. G.

. The Development of a Measurement and Analysis System to Accurately Determine Asphalt Concrete Properties Using the Indirect Tensile Mode. Journal of the Association of Asphalt Technologists, Vol. 61, 1992, pp. 304–332.

Molenaar

A. A. A.

Scarpas

Liu

and Erkens

. Semi-Circular Bending Test; Simple but Useful? Journal of the Association of Asphalt Technologists, Vol. 71, 2002, pp. 794–815.

Crouch

S. L.

and Starfield

A. M.

. Boundary Element Methods in Solid Mechanics. George Allen & Unwin, London, 1983.

10.

Crawford

A. M.

and Curran

J. H.

. Higher-Order Functional Variation Displacement Discontinuity Elements. International Journal of Rock Mechanics and Mining Sciences, Vol. 19, 1982, pp. 143–148.