Asphalt Multi-Integrated Rollers and Steel Drum Compactors

Abstract

Theoretical analysis supported by laboratory investigations and verified by field studies and observations has shown that defects caused by rolling compaction are the main contributors to early deterioration of asphalt surfaces. The conventional and widely used steel drum roller induces hairline cracks, which permit moisture to infiltrate pavement structure, causing the phenomenon known as stripping. In addition to inducing cracks, steel drums do not provide the desired uniformity in terms of density across the compacted width of the asphalt mat. Drummed rollers also produce poor compaction at unsupported edges of paved lanes. The asphalt multi-integrated roller (AMIR), an innovative compaction technology, offers a more effective alternative for overcoming problems of steel drum rollers by reducing permeability and, in turn, improving long-term performance of flexible pavements. A multistaged laboratory and field-testing program that measures permeability in terms of hydraulic conductivity was performed on pavement sections constructed using an AMIR side by side with a conventional steel roller. Asphalt concrete layers compacted by steel drum rollers were found, on average, to be up to 20 times more permeable than those compacted by the AMIR immediately after construction and as much as 10 times more permeable after 1 year. The major steps leading to the understanding of how rolling affects the permeability of asphalt layers and, consequently, the long-term performance of newly compacted pavements are discussed and presented.

Get full access to this article

View all access options for this article.

References

Mostafa

A. E. A.

The Stripping Susceptibility of Airfield Asphalt Mixes: The Development of Guidelines for a Laboratory Test Method. PhD thesis. Carleton University, Ottawa, Canada, 2005.

Abd El Halim

A. O.

and Haas

. Process and Case Illustration of Construction Innovation: From Concept to Commercial Realization. Journal of Construction Engineering and Management, Vol. 130, Issue 4, 2004, pp. 570–575.

Geller

Compaction Equipment for Asphalt Mixtures. Placement and Compaction of Asphalt Mixtures. ASTM Special Technical Publication 829, American Society for Testing and Materials, Philadelphia, Pa., 1982, p. 28.

Marker

Construction Methods—Symposium on Thick Lift Construction. Proceedings of the Association of Asphalt Pavement Technologists, College Park, Md., 1972, p. 354.

Mostafa

and Abd El Halim

A. O.

. Evaluating the Effect of Surface Cracks on Moisture Induced Damage Using Different Standard Test Methods for Airfield Asphalt Pavement Mixes. Presented at Canadian Technical Asphalt Association Meeting, Montreal, Quebec, Canada, 2004, pp. 318–339.

Abd El Halim

A. O.

Phang

and Haas

R. C.

. Unwanted Legacy of Asphalt Pavement Compaction. Journal of Transportation Engineering, Vol. 119, No. 6 1993, pp. 914–932.

Abd El Halim

A. O.

Haas

and Svec

O. J.

. Improved Asphalt Pavement Performance through a New Method of Compaction. Proc., 7th ARRB Conference Part 3, Australian Road Research Board, Melbourne, 1994, pp. 175–191.

Brown

Solving Compaction Problems with Superpave^® Mixes. Engineering News Record, March 23, 1998, pp. T21–T27.

Abd El Halim

A. O.

Phang

and Haas

R. C.

. Realizing Structural Design Objectives Through Minimizing of Construction Induced Cracking. Proc., 6th International Conference on Structural Design of Asphalt Pavements, Ann Arbor, Mich., Vol. I, 1987, pp. 965–970.

10.

Himeno

Watanabe

and Maruyama

. Estimation of Fatigue Life of Asphalt Pavement. Proc., 6th International Conference on Structural Design of Asphalt Pavements, University of Michigan, Ann Arbor, 1987.

11.

Haas

R. C. G.

Anderson

K. O.

Burgess

R. A.

Culley

R. W.

Dacyszyn

Kopvillem

McLeod

N. W.

Shields

B. P.

Phang

and Young

F. D.

. Low Temperature Pavement Cracking in Canada: The Problem and Its Treatment. C.G.R.A. Ad Hoc Committee on Low Temperature Behavior of Flexible Pavements, Annual Convention of Canadian Good Roads Association, Montreal, Quebec, 1970.

12.

Christison

T. J.

The Response of Asphalt Concrete Pavements to Low Temperature. PhD dissertation. University of Alberta, Edmonton, Canada, 1972.

13.

Abd El Halim

A. O.

Influence of Relative Rigidity on the Problem on Reflection Cracking. In Transportation Research Record 1007, TRB, National Research Council, Washington, D.C., 1985, pp. 53–58.

14.

Abd El Halim

A. O.

and Bauer

G. E.

. Premature Failure of Asphalt Overlays at Time of Construction. Road Transportation Association of Canada Annual Conference Proceedings, Ottawa, Ontario, Vol. 1, 1985, pp. 221–262.

15.

Richards

Goodman

Pagiani

Abd El Halim

A. O.

and Haas

. Practical Realization of a New Concept for Asphalt Compaction. In Transportation Research Record: Journal of the Transportation Research Board, No. 1654, TRB, National Research Council, Washington, D.C., 1999, pp. 27–35.

16.

Brown

A. B.

Sparks

J. W.

and Marsh

G. E.

. Objective Appraisal of Stripping of Asphalt from Aggregate Mixtures. Special Technical Publication 240, ASTM, Philadelphia, Pa., 1985, pp. 59–74.

17.

Scarlett

J. R.

Questionnaire Response: TAC Survey-Moisture Damage to HMAC and Use of Anti-Stripping Additives. Airport Civil Engineering, Architectural and Engineering Services, Public Work and Government Services Canada, Hull, Quebec, 1995.

18.

Zube

Compaction Studies of Asphalt Concrete Pavement as Related to the Water Permeability Test. 62–22, 3593 C-1. State of California, Department of Public Works, Division of Highways, Sacramento, 1962.

19.

Mohamed

E. H.

and Abd El Halim

A. O.

. Differential Thermal Expansion and Contraction: A Mechanistic Approach to Adhesion in Asphalt Concrete. Canadian Journal of Civil Engineering, Vol. 20, No. 3 1993, pp. 366–373.