Controlling Performance of Crumb Rubber–Modified Binders through Addition of Polymer Modifiers

Abstract

The use of tire rubber as a modifier to enhance the properties of asphalt mixes through the wet process has proved to be a successful procedure, but full control of the properties of crumb rubber–modified binders has been a challenge. The literature indicates a wide variation on adding rubber to asphalt and that the degree of success of rubber modification in AC mixes depends on several factors, the majority of which relate to the method of mixing, storing, and transporting and to construction technologies. Understanding the nature of the interaction process between asphalt cement and crumb rubber–modifier (CRM) helps explain the development of binder properties. This paper covers the wet process, a relatively different technology in the application of CRM in asphalt with virgin polymers used to control and enhance the performance properties of CRM binders. The paper provides some clear insights into the mechanisms by which the interaction, with and without the existence of polymer modifiers, takes place. Effects of the interaction process variables, time and temperature, are explained. Results of this research are based on monitoring the changes in the rheological parameters of the developed binder.

Get full access to this article

View all access options for this article.

References

Zanzotto

and Kennepohl

. Development of Rubber and Asphalt Binders by Depolymerization and Devulcanization of Scrap Tires in Asphalt. In Transportation Research Record 1530, TRB, National Research Council, Washington, D.C., 1996, pp. 51–58.

Abdelrahman

M. A.

and Carpenter

S. H.

. The Mechanism of the Interaction of Asphalt Cement with Crumb Rubber Modifier (CRM). In Transportation Research Record: Journal of the Transportation Research Board, No. 1661, TRB, National Research Council, Washington, D.C., 1999, pp. 106–113.

Heitzman

State of the Practice—Design and Construction of Asphalt Paving Materials with Crumb Rubber Modifier. Report FHWA-SA-92-022. Federal Highway Administration, May 1992.

Bahia

and Davies

. Effect of Crumb Rubber Modifiers (CRM) on Performance-Related Properties of Asphalt Binders. Journal of the Association of Asphalt Paving Technologists, Vol. 63, 1994.

Buckley

and Berger

. The Swelling of Polymer System in Solvents. Journal of Polymer Science, Vol. 56, 1962, p. 175.

Green

and Tolonen

. The Chemical and Physical Properties of Asphalt-Rubber Mixtures, Part I—Basic Material Behavior. Report FHWA-AZ-HPR14-162. Arizona Department of Transportation, March 1977.

Abdelrahman

M. A.

and Carpenter

S. H.

. Controlling Low Temperature Properties of Asphalt-Rubber Binders. Proc., 2nd Transportation Specialty Conference, Canadian Society for Civil Engineering, Halifax, Nova Scotia, Canada, June 1998.

Billiter

T. C.

Davison

R. R.

Glover

C. J.

and Bullen

J. A.

. Production of Asphalt-Rubber Binders by High-Cure Conditions. In Transportation Research Record 1586, TRB, National Research Council, Washington, D.C., 1997, pp. 50–56.

Western Research Institute. Fundamental Properties of Asphalts and Modified Asphalts. Semi-Annual Technical Report. Federal Highway Administration, Oct. 1994.

10.

Saylak

Noel

and Boggess

. The Duomorph—An In Situ Viscoelastic Characterization Transducer. Presented at 6th International Conference on Experimental Stress Analysis, Munich, Germany, Sept. 1978.

11.

Abdelrahman

and Cline

. Applications of Inter-Penetrating Network Process for Asphalt Modifications. Presented at Petersen Asphalt Research Conference, Western Research Institute, Laramie, Wyo., July 2001.

12.

Pauli

A. T.

and Schabron

J. F.

. Stability and Compatibility Testing of Petroleum and Asphalt. American Laboratory, Vol. 35, No. 19 2003, pp. 8–10.

13.

Western Research Institute. Prediction of Pavement Performance Symposium—Adhesion and Cohesion in Asphalt Pavements. June 2005. www.westernresearch.org/content/technology_areas/asphalt_materials/ADCOSymp.shtml. Accessed April 1, 2006.