Low-Temperature Thermal Cracking of Asphalt Binder by Asphalt Binder Cracking Device

Abstract

An asphalt binder cracking device (ABCD) is proposed to determine the low-temperature cracking potential of an asphalt binder. ABCD is a simple test method; the operating principle is based on the differential thermal contraction between the metal ABCD ring and an asphalt binder placed outside the ring. As the temperature is lowered, the test binder shrinks more rapidly than the ABCD ring placed inside; this results in the development of thermal stresses. When the developed thermal stress exceeds the strength of the binder, the binder specimen cracks. Strain gauges installed inside the ABCD ring detect the fracture, and the temperature is recorded as the ABCD cracking temperature. With a number of modified and unmodified binders, ABCD repeatability was studied. On the basis of this study, the ABCD and its test procedures were modified to produce repeatable results. In laboratory tests of unmodified and polymer-modified asphalts, ABCD showed a strong correlation with thermal stress restrained specimen test results. Also, ABCD cracking temperatures of the binders used in the well-known Elk County, Pennsylvania, test road correlates well with the cracking index of the test pavements.

Get full access to this article

View all access options for this article.

References

Anderson

Christensen

Dongre

Sharma

Runt

and Jordhal

. Asphalt Behavior at Low Service Temperatures. FHWA-RD-88-078. FHWA, U.S. Department of Transportation, Washington, D.C., 1990.

Heukelom

An Improved Method of Characterizing Asphaltic Bitumen with the Aid of Their Mechanical Properties. Proceedings of AAPT, Vol. 42, 1973.

Van der Poel

A General System Describing the Viscoelastic Properties of Bitumens and Its Relation to Routine Test Data. Journal of Applied Chemistry, Vol. 4, 1954.

Pfeiffer

and van Doormaal . Properties of Asphalt Bitumen. Elsevier Publishing Company, Inc., New York, 1950.

McLeod

N. W.

Asphalt Cements: Pen-Vis Number and Its Application to Moduli of Stiffness. ASTM Journal of Testing and Evaluation, Vol. 4, No. 4, 1976.

Gaw

W. J.

Measurement and Prediction of Asphalt Stiffness and Their Use in Developing Specifications to Control Low-Temperature Pavement Transverse Cracking. ASTM SPT 628. ASTM, 1977.

Fromm

H. J.

and Phang

W. A.

. Temperature Susceptibility Control in Asphalt Cement Specifications. Highway Research Record 350, HRB, National Research Council, Washington, D.C., 1971.

Kandhal

P. S.

Evaluation of Low-Temperature Pavement Cracking on Elk County Research Project. Transportation Research Record 777, TRB, National Research Council, Washington, D.C., 1980, pp. 39–50.

Anderson

D. A.

and Kennedy

T. W.

. Development of SHRP Binder Specifications. Journal of Association of Asphalt Paving Technologists, Vol. 62, 1993, pp. 481–507.

10.

Bouldin

M. G.

Dongre

Rowe

G. M.

Sharrock

M. J.

and Anderson

D. A.

. Predicting Thermal Cracking of Pavements from Binder Properties: Theoretical Basis and Field Validation. Journal of Association of Asphalt Paving Technologists, Vol. 69, 2000, pp. 455–496.

11.

Stuart

K. D.

and Youtcheff

J. S.

. Understanding the Performance of Modified Asphalt Binders: Low-Temperature Properties. Final Report FHWA-RD-02-074. FHWA, 2002.

12.

Iliuta

Andriescu

Hesp

S. A. M.

and Tam

K. K.

. Improved Approach to Low-Temperature and Fatigue Fracture Performance of Asphalt Cements. Proc., Canadian Technical Asphalt Association, 2004, pp. 125–159.

13.

Hills

J. F.

Predicting the Fracture of Asphalt Mixes by Thermal Stresses. Institute of Petroleum 74-014. Institute of Petroleum, 1974.

14.

Roy

and Hesp

S. A. M.

. Low-Temperature Binder Specification Development: Thermal Stress Restrained Specimen Testing of Asphalt Binders and Mixtures. Transportation Research Record: Journal of the Transportation Research Board, No. 1766, TRB, National Research Council, Washington, D.C., 2001, pp. 7–14.

15.

Kim

S. S.

Direct Measurement of Asphalt Binder Thermal Cracking. Journal of Materials in Civil Engineering, Vol. 17, No. 6, 2005.

16.

Kanerva

Vinson

and Zeng

. Low-Temperature Cracking: Field Validation of the Thermal Stress Restrained Specimen Test. Strategic Highway Research Program-A-401. National Research Council, Washington, D.C., 1994.

17.

Arand

Influence of Bitumen Hardness on the Fatigue Behavior of Asphalt Pavements of Different Thickness Due To Bearing Capacity of Subbase, Traffic Loading, and Temperature. Proc., 6th International Conference on Structural Behavior of Asphalt Pavements, University of Michigan, 1987, pp. 65–71.

18.

Jackson

N. M.

and Vinson

T. S.

. Analysis of Thermal Fatigue Distress of Asphalt Concrete Pavements. Transportation Research Record 1545, TRB, National Research Council, Washington, D.C., 1996, pp. 43–49.

19.

Ferry

J. D.

Viscoelastic Properties of Polymers, 3rd ed. John Wiley & Sons, New York, 1980.

20.

Boresi

A. P.

Schmidt

R. J.

and Sidebottom

O. M.

. Advanced Mechanics of Materials, 5th ed. John Wiley & Sons, New York, 1993.

21.

Kandhal

P. S.

Low Temperature Shrinkage Cracking of Pavements in Pennsylvania. Journal of Association of Asphalt Paving Technologists, Vol. 47, 1978, p. 73.

22.

Kandhal

P. S.

Dongre

and Malone

. Prediction of Low-Temperature Cracking of Pennsylvania Project Using Superpave Binder Specification. Journal of Association of Asphalt Paving Technologists, Vol. 65, 1996, p. 491.