Practical Probabilistic Design Format for Flexible Pavements

Abstract

Mechanistic–empirical (M-E) pavement design procedures such as the AASHTO 2002 design guide have been widely accepted and are being implemented by many highway agencies. However, several issues need to be resolved before this implementation is completed. One issue is that the design procedure should provide a consistent pavement performance level considering inherent variability associated with design input parameters. For a complete M-E pavement design procedure, the effects of the inherent variability of input design parameters on predicted pavement performance must be addressed and quantified. Some key principles for applying the reliability concept to M-E pavement design are presented to account for the inherent variability of design parameters. In particular, an appropriate reliability assessment technique and careful characterization of design input variability were considered because of their central role in calculating the reliability of pavement performance. Finally, a practical probabilistic design format for evaluating uncertainties in the M-E flexible pavement design procedure is introduced.

Get full access to this article

View all access options for this article.

References

Guide for Mechanistic–Empirical Design of New and Rehabilitated Pavement Structures. Final Report, NCHRP Project 1–37A. TRB, National Research Council, Washington, D.C., March 2004. http://trb.org/mepdg/guide.htm.

Kim

H. B.

, Harichandran

R. S.

, and Buch

. Development of Load and Resistance Factor Design Format for Flexible Pavements. Canadian Journal of Civil Engineering, Vol. 25, 1998, pp. 880–885.

Hasofer

A. M.

, and Lind

N. C.

. Exact and Invariant Second-Moment Code Format. Journal of Engineering Mechanics, ASCE, Vol. 100, 1974, pp. 111–121.

Ang

, and Tang

. Probability Concept in Engineering Planning and Design, Vols. I and II. John Wiley and Sons, Inc., New York, 1975 and 1984.

Rackwitz

, and Fiessler

. Structural Reliability under Combined Random Load Sequences. Computers & Structures, Vol. 9, 1978, pp. 489–494.

Christian

J. T.

, Ladd

C. C.

, and Baecher

G. B.

. Reliability Applied to Slope Stability Analysis. Journal of Geotechnical Engineering, ASCE, Vol. 120, 1994, pp. 2180–2207.

Ravindra

M. K.

, and Galambos

. Load and Resistance Factor Design for Steel. Journal of the Structural Division, ASCE, Vol. 104, 1978, pp. 1337–1353.

Proposed AASHTO Guide for Design of Pavement Structures. NCHRP Project 20-7/24, Vol. 2. Association of State Highway and Transportation Officials, Washington, D.C., 1985.

Harichandran

R. S.

, Buch

, and Baladi

G. Y.

. Flexible Pavement Design in Michigan: Transition from Empirical to Mechanistic Methods. In Transportation Research Record: Journal of the Transportation Research Board, No. 1778, Transportation Research Board of the National Academies, Washington, D.C., 2001, pp. 100–106.

10.

Timm

, Birgisson

, and Newcomb

. Variability of Mechanistic–Empirical Flexible Pavement Design Parameters. Proc., Fifth International Conference on the Bearing Capacity of Roads and Airfields, 1998, Vol. 1, pp. 629–638.

11.

Noureldin

S. A.

, Sharaf

, Arafah

, and Al-Sugair

. Estimation of Standard Deviation of Predicted Performance of Flexible Pavements Using AASHTO Model. In Transportation Research Record 1449, TRB, National Research Council, Washington, D.C., 1994, pp. 46–56.

12.

Brown

J. L.

Reliability in Pavement Design? Who's Kidding Whom? In Transportation Research Record 1449, TRB, National Research Council, Washington, D.C., 1994, pp. 26–29.

13.

Kim

H. B.

Framework for Incorporating Rutting Prediction Model in the Reliability-Based Design of Flexible Pavements. Ph.D. dissertation. Michigan State University, 1999.