Seismic Testing to Determine Quality of Hot-Mix Asphalt

Abstract

Existing practices for acceptance of hot-mix asphalt are based on parameters such as adequate density, adequate thickness, and adequate air voids of the placed and compacted materials. Current mechanistic routines for structural design of flexible pavements consider mainly the modulus of each layer. Therefore, a procedure to measure the modulus of each pavement layer shortly after placement is highly desired. Laboratory tests on specimens prepared from material retrieved during construction, such as the simple-performance tests, can be used to determine these moduli. However, these methods are time-consuming, and the equipment costs are high. In addition, prepared specimens may not be representative of as-placed materials. Seismic tests are more practical because they are rapid to perform and are nondestructive, immediate results are obtained, and the material is tested in its natural state. The portable seismic property analyzer (PSPA) is an example of such a device. The PSPA is presented as a real-time nondestructive method with which to assess the hot-mix asphalt quality in the field.

Get full access to this article

View all access options for this article.

References

Huang

Y. H.

Pavement Analysis and Design. Prentice Hall, Englewood Cliffs, N.J., 1993, pp. 805.

Daniel

J. S.

and Kim

Y. R.

Relationships Among Rate-Dependent Stiffness of Asphalt Concrete Using Laboratory and Field Test Methods. In Transportation Research Record 1630, TRB, National Research Council, Washington, D.C., 1998, pp. 3–9.

Bai

Assessment of Relationship Between Dynamic and Seismic Moduli of Asphalt Concrete Mixtures. Master's thesis. University of Texas, El Paso, 79968.

Roberts

F. L.

Kandhal

P. S.

Brown

E. R.

Lee

and Kennedy

T. W.

Hot Mix Materials: Mixture Design and Construction. NAPA Education Foundation, Lanham, Md., 1996.

Nazarian

Tandon

and Yuan

Mechanistic Quality Management of Asphalt Concrete Layers with Seismic Methods. Journal of ASTM International, Vol. 2, No. 8, ASTM, West Conshohocken, Pa., 2005.

Applied Research Associates. NCHRP Final Report Part 3: Guide for Mechanistic–Empirical Design of New and Rehabilitation Pavement Structures. TRB, National Research Council, Washington, D.C., 2004.

Baker

M. R.

Crain

and Nazarian

Determination of Pavement Thickness with a New Ultrasonic Device. Research Report 1966-1. Center for Highway Materials Research, University of Texas, El Paso, 1995.

Nazarian

Baker

M. R.

and Crain

SHRP Report H-375: Development and Testing of a Seismic Pavement Analyzer. SHRP, National Research Council, Washington, D.C., 1993.

Tashman

Masad

Peterson

and Saleh

Internal Structure Analysis of Asphalt Mixes to Improve the Simulation of Superpave Gyratory Compaction to Field Conditions. Journal of the Association of Asphalt Paving Technologists, Vol. 70, 2001, pp. 605–645.