Developing Standard Times for Repair Activities for Transit Vehicles

Abstract

This paper presents a systematic method for determining repair time standards for transit vehicles. Most approaches typically used for time and motion study are designed mainly for manufacturing processes and thus find limited applications in transit environments. The methodology developed in this study is comprehensive and incorporates relevant factors such as maintenance procedures and work bay components and design, which are particular to the transit industry. This methodology has been employed on two systems: brake repair and preventive maintenance on buses. A major component of the methodology pertains to restructuring procedures, not only to improve work flow but also to normalize the operative assignments across transit shops. That focus facilitates productivity control and allows managers to assess training needs better. Outcomes reveal that the proposed methodology serves as a framework to develop valid standards that could have an impact on the efficiency of technicians while reducing total job completion time. Results are enhanced by the development of an information system that allows tracking of the time technicians take to complete the tasks and that represents, graphically, the performance rating based on the time standards developed. This tool assists supervisors during complex management decisions for resource allocation and scheduling. This project was initiated by the Florida Department of Transportation and the Center of Urban Transportation Research (CUTR). The research is part of the Florida Maintenance Training and Technical Assistance Program in CUTR and is guided by the committee of Transit Maintenance Consortium. The committee includes the managers and supervisors of the transit agencies throughout Florida.

Get full access to this article

View all access options for this article.

References

Hoffer

J. A.

, Prescott

B. M.

, and McFadden

F. R.

. Modern Database Management System, 6th ed.

Prentice Hall,

Upper Saddle River, N.J.,

2001.

Paaswell

R. E.

, Audenaerd

, and Jafari

. Application of Industrial Standards to Bus Maintenance Procedures. In Transportation Research Record 1571, TRB, National Research Council, Washington, D.C., 1997, pp. 50–55.

Maze

T. H.

, and Cook

A. R.

. Theory and Practice of Transit Bus Maintenance Performance Measurement. In Transportation Research Record 1140, TRB, National Research Council, Washington, D.C., 1987, pp. 18–29.

List

, and Lowen

. Bus Maintenance Performance Indicators: Historical Development and Current Practice. In Transportation Research Record 1140, TRB, National Research Council, Washington, D.C., 1987, pp. 30–44.

Purdy

J. E.

Work Standards: Their Use and Development Using a Maintenance Management Information System. In Transportation Research Record 1266, TRB, National Research Council, Washington, D.C., 1990, pp. 50–64.

Schiavone

J. J.

TCRP Synthesis of Transit Practice 22: Monitoring Bus Maintenance Performance, TRB, National Research Council, Washington, D.C., 1997.

Inaba

NCTRP Synthesis of Transit Practice 4: Allocation of Time for Transit Bus Maintenance Functions. TRB, National Research Council, Washington, D.C., 1984.

Crittenden

D. M.

, and Hill

E. T.

. Procedures for Developing Standard Repair Times (SRT) for State of Florida Transit Systems. Center of Urban Transportation Research, University of South Florida,

Tampa,

1999.

Venezia

F. W.

TCRP Synthesis of Transit Practice 54: Maintenance Productivity Practices, Transportation Research Board of the National Academies, Washington, D.C., 2004.

10.

Niebel

, and Freivalds

. Methods Standards and Work Design. McGraw-Hill, New York, 1999.