Abstract
A new high-resolution temperature and strain sensor with fiber Bragg grating (FBG) technology was developed. The FBG sensor consists of a reference fiber grating and a grating pair scheme that could offer the potential of simultaneous measurement of strain and temperature for monitoring pavement structures. Experimental results showed that measurement errors of ±μ∈ and ±0.13°C for strain and temperature could be achieved, respectively. Feasible applications of this sensor for monitoring pavement structures were investigated. The reliability and long-term stability tests for this sensor were examined by mounting it on the surface of two kinds of specimens, asphalt and concrete, and several temperature cycles with a designed working temperature range up to 110°C were applied for at least 24 h. An electronic thermocouple and a long-period optical fiber grating (LPG) sensor with similar function were used to compare the performance. Small root-mean-squared temperature variations (better than 1°C) and excellent long-term stability (within 2%) were obtained. The maximum variations in temperature for 48 h were only 1.94% and 2.32% for asphalt and concrete specimens, respectively. Results indicated that although the performance of this FBG sensor was comparable with that of the conventional thermocouple, its long-term stability was four times better than its counterpart, the LPG sensor. This type of simple and low-cost fiber-optic sensor is expected to benefit the developments and applications of new paving materials, mix design procedures, or the enhancement of pavement management systems.
Get full access to this article
View all access options for this article.