Seed Modulus Generation Algorithm for Backcalculation of Flexible Pavement Moduli

Abstract

The seed moduli chosen for backcalculation analysis of multilayer flexible pavements can have significant impacts on the performance of backcalculation software and, sometimes, the final solutions of the backcalculated moduli. Practically all backcalculation programs provide internally generated seed moduli for backcalculation analysis. However, as the internally generated seed moduli do not always produce satisfactory results, the use of user-input seed moduli is generally encouraged. With the aim of providing useful guidance in the choice of seed moduli, a seed modulus generation algorithm, 2L-BACK, for multilayer flexible pavements based on a closed-form modulus backcalculation solution for two-layer flexible pavement structures was developed. The proposed algorithm does not require any subjective judgment by the user. An evaluation analysis of the effectiveness of the proposed procedure is presented by the use of two types of backcalculation software, MICHBACK and EVERCALC, and is based on measured and computed data for flexible pavement segments from the Long-Term Pavement Performance project. A comparison was made of the backcalculation program performance and the computed moduli of solutions obtained from internally generated seed moduli and those obtained from seed moduli generated by the proposed algorithm. It was found that the proposed seed modulus generation algorithm led to enhanced program performance of MICHBACK with respect to convergence characteristics and the accuracies of the backcalculated solutions. In comparison, the corresponding improvements for the case of EVERCALC were less. The proposed seed modulus generation algorithm does not suffer from the location and pavement type transferability constraints of most regression-based seed modulus generation methods. The results of the study suggest that the algorithm can be effectively incorporated into backcalculation software for multilayer flexible pavements.

Get full access to this article

View all access options for this article.

References

Harichandran

R. S.

, Mahamood

, Raab

A. R.

, and Baladi

G. Y.

. Modified Newton Algorithm for Backcalculation of Pavement Layer Properties. In Transportation Research Record 1384, TRB, National Research Council, Washington, D.C., 1993, pp. 15–22.

May

R. W.

, and Von Quintus

H. L.

. The Quest for a Standard Guide to NDT Backcalculation. In Nondestructive Testing of Pavements and Backcalculation of Moduli, 2nd volume ( Von Quintus

H. L.

, Bush

A. J.

III , and Baladi

G. Y.

, ed.). ASTM STP 1198. ASTM, Philadelphia, Pa., 1994, pp. 505–520.

Ullidtz

Pavement Analysis. Elsevier, Amsterdam, Netherlands, 1987.

Harichandran

R. S.

, Ramon

C. M.

, and Baladi

G. Y.

. MICHBACK User's Manual. Department of Civil and Environmental Engineering, Michigan State University, East Lansing, 2000.

EVERCALC 5.0 FWD Backcalculation Program. Washington State Department of Transportation, Seattle, 1999.

Scrivner

F. H.

, Michalak

C. H.

, and Moore

W. M.

. Calculation of the Elastic Moduli of a Two-Layer Pavement System from Measured Surface Deflections. In Highway Research Record 431, HRB, National Research Council, Washington, D.C., 1973, pp. 12–22.

Burmister

D. M.

The Theory of Stresses and Displacements in Layered Systems and Applications to Design of Airport Runways.

Highway Research Board Proceedings, Vol. 23, 1943, pp. 126–144.

, Fwa

T. F.

, and Tan

K. H.

. Closed-Form Backcalculation of Rigid-Pavement Parameters. Journal of Transportation Engineering, Vol. 122, No. 1, 1996, pp. 5–11.

Fwa

T. F.

, Tan

K. H.

, and Li

Graphical Solutions for Back-Calculation of Rigid Pavement Parameters.

Journal of Transportation Engineering, Vol. 124, No. 1, 1998, pp. 102–104.

10.

Guide for Design of Pavement Structures. AASHTO, Washington, D.C., 1993.

11.

LTPP Datapave 3.0 (CD-ROM), July 2001 release. FHWA, U.S. Department of Transportation, 2001.

12.

Rani

T. S.

, and Fwa

T. F.

. Closed-Form Backcalculation Algorithm for Two-Layer Flexible Pavements. Proc., 6th EASTS Conference, East Asian Society for Transportation Studies, Bangkok, Thailand, Sept. 21–24, 2005, submitted for presentation and publication.

13.

WSDOT Pavement Guide, Vol. 3. Pavement Analysis Computer Software and Case Studies. Washington State Department of Transportation, Seattle, 1999.

14.

Smith

B. E.

, and Witczak

M. W.

. Equivalent Granular Base Modulus: Prediction. Journal of Transportation Engineering, Vol. 107, No. 6, 1981, pp. 741–762.

15.

Chou

Y. J.

, Uzan

, and Lytton

R. L.

. Backcalculation of Layer Moduli from Nondestructive Pavement Deflection Data Using the Expert System Approach. In Nondestructive Testing of Pavements and Backcalculation of Moduli ( Bush

A. J.

III , and Baladi

G. Y.

, ed.). ASTM STP 1026. ASTM, Philadelphia, Pa., 1989, pp. 341–354.

16.

Back-Calculation of Layer Parameters for LTPP Test Sections, Volume II: Layered Elastic Analysis for Flexible and Rigid Pavements. Report FHWA-RD-01–113. FHWA, U.S. Department of Transportation, 2002.