The unique features of highpressure sodium lamps and their systems interactions

Abstract

View all access options for this article.

Noel

E. B.

and Martt

E. C.

, “Effect of Operating Variables on Mercury Lamp Performance,” Illuminating Engineering, Vol. LI, No. 7, July 1956.

Reiling

G. H.

, “Characteristics of Mercury Vapor—Metallic Iodide Arc Lamps,” Journ. Opt. Soc. Amer., 54(4), 532, April 1954.

Martt

E. C.

, Green

A. C.

and Smialek

L. J.

, “Iodides in Mercury Arcs for Improved Colour and Efficacy,” Illuminating Engineering, 59(1), 34, January 1964.

Louden

W. C.

and Schmidt

, “High Pressure Sodium Discharge Arc Lamps,” Illuminating Engineering, 60(12), 696, December 1965.

Unglert

M. C.

and Kane

R. M.

, “The interaction of high-pressure sodium lamps, ballasts and luminaires,” LD& A, Vol. 10, No. 11, November 1980.

Inouye

, Higashi

, Ishigami

, Nagano

, and Shimojima

, “The Cause of Lamp Voltage Increase of High Pressure Sodium Lamp,” J. Light & Vis. Env., Vol. 3, No. 1, 1979.

Specification for 400-W High Pressure Sodium Lamps S51, ANSI C78.1350, American National Standards Institute, New York (1976).

Collins

B. R.

and McVey

C. I.

, “High-pressure sodium lamps for use on high-pressure mercury lamp ballasts,” LD& A, Vol. 5, No. 9, September 1975.

Jacobs

C. A. J.

, Sprengers

, de Vaan

R. L. C.

, “Arc voltage control in low and high pressure sodium lamps,” Journal of IES, January 1978.