A clear discussion of voltage changes, ballasts, effects on lamp performance and what it all means to the user or specifier
Get full access to this article
View all access options for this article.
References
1.
CollinsB. R., and LoudenW. C. “System effects on high pressure sodium lamps,” American National Standards Institute (ANSI) C78.2 Subcommittee Proceedings, June 27, 1972.
2.
CollinsB. R., and McVeyC. L “High-pressure sodium lamps for use on high pressure mercury lamp ballasts,” Lighting Design & Application, Vol. 5, No. 9, September 1975, p. 18.
3.
LoudenW. C., and SchmidtK. “High pressure sodium discharge arc lamps,” Illuminating Engineering, Vol. 50, No. 12, December 1965, P. 696.
4.
“Specifications for 400-W high pressure sodium lamps S51,” American National Standards Institute (ANSI) C78.1350, New York, 1976.
5.
KappenhogenG. A.EngelJ. C., and ElmsR. T. “Universal lamp operating circuit,” Illuminating Engineering, Vol. 64, No. 12, December 1969, p. 708.
6.
FreegardE. “What you should know about HID ballasts,” Electrical Construction and Maintenance, February 1973, p. 69.
7.
ScholzC. F. “Characteristics of ballast regulations for high intensity discharge lamps,” Journal of Illuminating Engineering Society, Vol. 3, No. 4, July 1974, p. 310.
