“Skills in daylighting design analysis have been rediscovered after 20 years of dormancy, but the experience which must temper knowledge to produce effective results is frequently lacking.”
Get full access to this article
View all access options for this article.
References
1.
RosenfeldA. H. and SelkowitzS. E. “Beam daylighting: direct use of solar energy for interior illumination,” Proceedings of the 1976 International Solar Energy Society Annual Conference,1976.
2.
DuguayM. A. and EdgarR. M., “Lighting with sunlight using sun tracking concentrators,” Applied Optics, vol. 16, no. 5, pp. 1444–1446.
3.
International Recommendations for the Calculation of Natural Daylight, Commission Internationale, De L'Eclairage, publication No. 16 (E-3.2) 1970.
4.
Daylighting Committee of the IES, “Recommended practice of daylighting,” Illuminating Engineering, vol. 62, p 517, 1962. Also see p 25, this issue.
5.
How to Predict Interior Daylight Illumination.Libbey-Owens-Ford Company, Toledo, Ohio, 1976.
6.
KusudaT. and CollinsB., Simplified Analysis of Thermal and Lighting Characteristics of Windows: Two Case Studies, BSS 109. National Bureau of Standards, 1978.
7.
ArumiF., “Daylighting as a factor in optimizing the energy performance of buildings,” Energy and Buildings, vol. 1, no. 2, pp 175–182, 1977.
8.
Voluntary Standard Procedure for Calculating Skylite Annual Energy Balance,Architectural Aluminum Manufacturers Association: Pub. No. AAMA 1602.1., 1977, Chicago, III., 1977.
9.
OlgyayA. and OlgyayV., Solar Control and Shading Devices,Princeton University Press, Princeton, N.J., 1976.
10.
RubinA., CollinsB., and TibbottR., Window Blinds as a Potential Energy Saver—A Case Study. BSS 112, 1978.
11.
KingW., High Performance Solar Control Office Windows.LBL report #7825, Berkeley, California, 1977.
12.
HardyA. C. and O'SullivanP. E., Insulation and Fenestration,Oriel Press Ltd., Newcastle-upon-Tyne, 1967.
