Straight Lines or Ribbon of the Impairment Found on the Body with the Bi-Digital O-Ring Test: Their Origin and How to Avoid Them

Abstract

Patients examined with the Bi-Digital O-Ring Test originally developed by Prof. Omura, Y. of New York, can show straight impairment lines or ribbons that raise a lot of questions.

They are due to long time exposure to standing waves of low intensity electro-magnetic fields, day after day on the same place, mostly in the bedroom.

These electro-magnetic waves and fields are in the cm or mm range and induce resonance and uptake phenomena in our body.

We can distinguish carrier waves and carried waves.

carrier waves show both polarities in balance and are produced by: networks all over the earth, water veins, faults in the earth crust, electric power lines, radar, hertz cables, satellites, TV stations and other sources of electro-magnetic waves.

carried waves have imbalanced polarities and are very harmful when in resonance with the specific wavelength of tissues or organs.

Good influences can also be observed and were known in ancient times(sacred places).

Our civilization creates a tremendous overload of electro-magnetic fields, polluting the natural lines and networks (radar, radio, TV, satellites, cellular phones, microwave devices).

All these influences can be brought to our bed where we take them up for several hours day after day. As a result of the uptake, tracks of impairment are found on the body. The responsible lines can be found on the bed, in the house and outside the house: their detection is possible with the Bi-Digital O-Ring Test as well as with expensive electronic devices.

The author uses a simple device, the lecher antenna, allowing good trained people to detect and estimate wavelength, polarity and intensity.

Affordable electronic devices are able to meet these parameters on patients and on the places where they live and sleep (portable, detecting very low intensities of cm and mm waves).

Prevention is possible to some extent (diverting antennas, flames, absorbers).

Building houses should core with lowering electro-magnetic overload. The abuse of cm and mm emissions must be reduced.