This paper investigates a novel control strategy that enables hybrid excitation permanent magnet synchronous generator (HPMSG) to track the optimal extracted power of the modern wind turbine type (NASA-NSF). The proposed control mathematical model is based on two cases of variable speed—Maximum Power Point Tracking (MPPT) and variable speed—Constant Power Point Tracking (CPPT). The later one is specified for wind gust and higher than rated wind speed withstanding operation. The HPMSG generator quantitative performance characteristics are presented and validated through simulation for both steady and dynamics states. Simulation results prove the capability of the generator to operate correctly under load and speed variation over both MPPT and CPPT. The output voltage stays, in both cases, within the much lower limits that imposed by maximum values.
AmuhayaLKamperM (2015) Design and optimisation of grid compliant variable-flux PM synchronous generator for wind turbine applications. In: Presented at the 2015 IEEE energy conversion congress and exposition (ECCE), pp. 829–836. New York, NY: IEEE.
2.
BeikOSchofieldN (2018) High-voltage hybrid generator and conversion system for wind turbine applications. IEEE Transactions on Industrial Electronics65: 3220–3229.
3.
BelkacemABoudjemaZBachirG, et al. (2022) Advanced control of a permanent magnet synchronous generator for a wind turbine. Indonesian Journal of Electrical Engineering and Computer Science26: 194–201.
4.
BourasABourasSRouabhiaCE, et al. (2020) Experimental investigation of an alternative wind energy generator, particularly designed. Revista Facultad de Ingeniería Universidad de Antioquia101(2021): 100–107.
5.
ChakirHOuadiHGiriF (2015) Output feedback control of wind energy conversion system with hybrid excitation synchronous generator. IFAC-PapersOnLine48: 622–627.
6.
CherifHAffiSBelhadjJ, et al. (2019) Design and performance investigation of small-scale wind turbine system based on hybrid excited flux switching machine. In: Presented at the 2019 international conference on advanced systems and emergent technologies (IC_ASET), pp. 375–380. New York, NY: IEEE.
7.
DastaniMArdebiliM (2015) Optimal design and analysis simulation of an outer rotor hybrid excited generator for wind energy conversion systems. In: Presented at the 2015 23rd Iranian conference on electrical engineering, pp. 1474–1479. New York, NY: IEEE.
8.
ElsonbatyNAEnanyMAHassaninMI (2020a) An efficient vector control policy for EV-Hybrid excited permanent-magnet synchronous motor. World Electric Vehicle Journal11: 42.
9.
ElsonbatyNAEnanyMAHassaninMI (2020b) Combined Current Control Strategy for EV- HESM.
10.
ElsonbatyNAEnanyMAElymanyM (2021a) Proposed rotor field - oriented maximum power point tracking polices for permanent magnet synchronous generator - based wind turbine. Wind Engineering45: 973–991.
11.
ElsonbatyNAEnanyMAElymanyM (2021b) Concurrent unity power factor and constant mutual flux control for PMSG-WT MPPT. Wind Engineering45: 1160–1174.
12.
GajewskiPPieńkowskiK (2021) Control of the hybrid renewable energy system with wind turbine, photovoltaic panels and battery energy storage. Energies14: 1595.
13.
HliouiSGabsiMAhmedHB, et al. (2022) Hybrid excited synchronous machines. IEEE Transactions on Magnetics58: 1–10.
14.
HolmesPElsonbatyN (1984) Cycloconvertor-excited divided-winding doubly-fed machine as a wind-power convertor. In: Presented at the IEE proceedings B (electric power applications), pp. 61–69. UK: IET.
15.
JiangJZhangXZhaoX, et al. (2021) A novel winding switching control strategy for AC/DC hybrid-excited wind power generator. IEEE Transactions on Magnetics57: 1–4.
16.
JiangPZhangTGengJ, et al. (2023) An MPPT strategy for wind turbines combining feedback linearization and model predictive control. Energies16: 4244.
17.
KamievKParviainenAPyrhönenJ (2016) Hybrid excitation synchronous generators for small hydropower plants. In: Presented at the 2016 XXII international conference on electrical machines (ICEM), pp. 2529–2535. New York, NY: IEEE.
18.
LouisJ-P (ed.). (2013) Control of Synchronous Motors. Hoboken, New Jersey: John Wiley & Sons.
19.
MizunoTNagayamaKAshikagaT, et al. (1996) Basic principles and characteristics of hybrid excitation synchronous machine. Electrical Engineering in Japan117: 110–123.
20.
NadiaEAMohamedEAMahmoudE (2021) Assessment of proposed maximum power point tracking–unity power factor algorithms for optimum operation permanent magnet synchronous generator–based wind turbine. Wind Engineering45: 381–399.
21.
SuWLinNZhangX, et al. (2024) Electromagnetic performance analysis of a new high-speed hybrid excitation synchronous machine. IET Electric Power Applications. 1–11. https://doi.org/10.1049/elp2.12422
22.
TantawyAKoutsoukosXBiswasG (2012) Aircraft power generators: Hybrid modeling and simulation for fault detection. IEEE Transactions on Aerospace and Electronic Systems48: 552–571.
23.
WangQNiuS (2017) Overview of flux-controllable machines: Electrically excited machines, hybrid excited machines and memory machines. Renewable and Sustainable Energy Reviews68: 475–491.
24.
WangSNiuSFuW (2020) Comparative study of relieving-DC-saturation hybrid excited vernier machine with different rotor pole designs for wind power generation. IEEE Access8: 198900–198911.
YeBYRuanYYangY, et al. (2011) Direct driven wind energy conversion system based on hybrid excitation synchronous machine. Journal of Shanghai University (English Edition)15: 562–567.
27.
ZhaoXNiuSFuW (2020) Sensitivity analysis and design optimization of a new hybrid-excited dual-PM generator with relieving-DC-saturation structure for stand-alone wind power generation. IEEE Transactions on Magnetics56: 1–5.
