This paper presents a modeling and robust control of the DFIG (doubly fed induction generator) used in the wind energy conversion system (WECS). We started by using the MPPT method to extract the maximum power in the WECS, modeling the double-fed inductor generator, and then applying the Backstepping controller to control the reactive power and electromagnetic torque in order to test the performance and the robustness of the system. All is simulated and presented in MATLAB/SIMULINK software.
AlamiHEBossoufiBMotahhirS, et al. (2022) FPGA in the loop implementation for observer sliding mode control of DFIG-generators for wind turbines. Electronics11(1): 116.
2.
Anaya-LaraOJenkinsNEkanayakeJ, et al. (2009) Hughes Wind energy generation: Modelling and control. West Sussex: John Wiley & Sons, Ltd.
3.
BaroudiJADinavahiVKnightAM (2007) A review of power converter topologies for wind generators. Renewable Energy32: 2369–2385.
4.
BossoufiBKarimMLagriouiA, et al. (2014) FPGA-based implementation nonlinear backstepping control of a PMSM drive. International Journal of Power Electronics and Drive Systems (IJPEDS)4: 12–33.
5.
BossoufiBKarimMTaoussiM, et al. (2021) Rooted tree optimization for the backstepping power control of a doubly fed induction generator wind turbine: dSPACE implementation. IEEE Access9: 26512–26522.
6.
BoualouchAENasserTBoukhrissA, et al. (2015) Power control of DFIG in WECS using backstipping and sliding mode controller. International Journal of Electrical Computer Energetic Electronic and Communication Engineering9: 612–618.
7.
BouderbalaMBossoufiBLagriouiA, et al. (2019) Direct and indirect vector control of a doubly fed-fed induction generator based in a wind energy conversion system. International Journal of Electrical and Computer Engineering9(3): 1531.
8.
ChakibM (2018) A comparative study of PI, RST and ADRC control strategies of a doubly fed induction generator based wind energy conversion system. International Journal of Renewable Energy Research-IJRER 8: 964–973.
9.
ChetouaniEErramiYObbadiA, et al. (2021) Hybrid control using adaptive particle swarm optimization and integral backstepping control of grid-connected doubly fed induction generator. Trends in the Sciences18(23): 712.
10.
DrhorhiI (2020) Adaptive backstepping controller for DFIG-based wind energy conversion system. In: Advances in Nonlinear Dynamics and Chaos (ANDC). Cambridge, MA: Academic Press, pp. 235–260.
11.
ErramiYObbadiASahnounS (2020) Control of PMSG wind electrical system in network context and during the MPP tracking process. International Journal of Systems Control and Communications11: 200–225.
12.
JenkalHBossoufiBBoulezharA, et al. (2020) Vector control of a doubly fed induction generator wind turbine. Materials Today30(4): 976–980.
13.
LamnadiMTrihiMBossoufiB, et al. (2016) Modeling and control of a doubly-fed induction generator for wind turbine-generator systems. International Journal of Power Electronics and Drive Systems (IJPEDS)7: 982–994.
14.
LoucifM (2021) Integral backstepping power control of DFIG based nonlinear modeling using voltage oriented control. In: Motahhir S and Bossoufi B (eds) Digital Technologies and Applications. ICDTA 2021. Lecture Notes in Networks and Systems,Vol 211.Cham: Springer, pp. 1725–1734.
15.
MahvashHTaherSARahimiM, et al. (2019) Enhancement of DFIG performance at high wind speed using fractional order PI controller in pitch compensation loop. International Journal of Electrical Power & Energy104: 259–268.
16.
MensouS (2017) An efficient nonlinear backstepping controller approach of a wind energy conversion system based on a DFIG. International Journal of Renewable Energy Research7(v7i4): 1520–1528.
17.
MensouSEssadkiAMinkaI, et al. (2018) Backstepping controller for a variable wind speed energy conversion system bBased on a DFIG. International Journal of Electrical and Computer Engineering12(9).
18.
PoitierF (2003) étude et commande de génératrices asynchrones pour l’utilisation de l’énergie éolienne. Thèse de Doctorat de l’université de NANTE.
19.
RhailiSAbbouAMarhraouiS, et al. (2020) Robust sliding mode control with five sliding surfaces of five-phase PMSG based variable speed wind energy conversion system. International Journal of Intelligent Engineering and Systems13: 346–357.
20.
SinghGSalehAAmosJ, et al. (2018) IC6A1A6 vs. IC3A1 Squirrel Cage Induction Generator Cooling Configuration Challenges and Advantages for Wind Turbine Application. In: Proceedings of the ASME 2018 power conference collocated with the ASME 2018 12th international conference on energy sustainability and the ASME 2018 Nuclear Forum. Volume 1: fuels, combustion, and material handling; combustion turbines combined cycles; boilers and heat recovery steam generators; virtual plant and cyber-physical systems; plant development and construction; renewable energy systems, Lake Buena Vista, FL, 24–28 June, V001T06A002. New York, NY: ASME.
21.
SinghGLentijoSSundaramK (2019a) The impact of the converter on the reliability of a wind turbine generator. In: Proceedings of the ASME 2019 power conference, Salt Lake City, UT, 15–18July, V001T06A016. New York, NY: ASME.
22.
SinghGMatuontoMAmosJ, et al. (2019b) System of systems strand tilt analysis perspective on medium high voltage stator bar and a non-destructive testing case study. In: 2019 IEEE international systems conference (SysCon), 8–11 April, pp.1–8. New York, NY: IEEE. ;DOI: 10.1109/SYSCON.2019.8836934.
23.
SinghGMatuontoMSundaramK (2019c) Impact of imbalanced wind turbine generator cooling on reliability. In: 2019 10th International renewable energy congress (IREC), 26–28 March, pp.1–6. New York, NY: IEEE. DOI: 10.1109/IREC.2019.8754545.
24.
SinghGSundaramKSalehA (2019d) Addressing reduced ingress protection class & proper filter selection for open ventilated (IC3A1) wind turbine generator. In: 2019 10th International renewable energy congress (IREC), 26–28 March, pp.1–5. New York, NY: IEEE. DOI: 10.1109/IREC.2019.8754542.
25.
SinghGSundaramK (2021) Manufacturing deformation impact on the performance of electrical generator for the wind turbine application. Wind Engineering45(5): 1193–1205.
26.
SinghGSundaramK (2022) Methods to improve wind turbine generator bearing temperature imbalance for onshore wind turbines. Wind Engineering46(1): 150–159.
27.
SinghGSundaramK (2021) Common mode current effects and challenges for wind turbine generator application. In: Proceedings of the ASME 2021 power conference, Virtual, Online, 20–22 July, V001T09A002. New York, NY: ASME.
28.
SinghGSundaramKMatuontoM (2021) A solution to reduce overheating and increase wind turbine systems availability. Wind Engineering45(3): 491–504.
29.
YangXLiuGLeVD, et al. (2019) A novel model-predictive direct control for induction motor drives. IEEJ Transactions on Electrical and Electronic Engineering14: 1691–1702.
30.
YessefMBossoufiBTaoussiM, et al. (2022a) Enhancement of the direct power control by using backstepping approach for a doubly fed induction generator. Wind Engineering. Epub ahead of print 19March2022. DOI: 10.1177/0309524X221085670
31.
YessefMBossoufiBTaoussiM, et al. (2022b) Overview of control strategies for wind turbines: ANNC, FLC, SMC, BSC, and PI controllers. Wind Engineering. Epub ahead of print 28June2022. DOI: 10.1177/0309524X221109512
32.
YessefMBossoufiBTaoussiM, et al. (2022c) Improving the maximum power extraction from wind turbines using a second-generation CRONE Controller. Energies15: 3644.
